2014 TOYOTA FJ CRUISER steering

[x] Cancel search: steering

Page 411 of 572

TOYOTA FJ CRUISER 2014 1.G Owners Manual 411
4-3. Do-it-yourself maintenance
4
Maintenance and care
Engine compar tment
Washer fluid tank (P. 423)
Power steering fluid reservoir ( P. 419)
Radiator cap
Engine oil level dipstick ( P.

Page 419 of 572

TOYOTA FJ CRUISER 2014 1.G Owners Manual 419
4-3. Do-it-yourself maintenance
4
Maintenance and care
Power steering fluid
■ Fluid level
The fluid level should be within the appropriate range.
Full (when cold)
Add fluid (when cold)
Full (whe

Page 420 of 572

TOYOTA FJ CRUISER 2014 1.G Owners Manual 420 4-3. Do-it-yourself maintenance
Battery■ Battery exterior
Make sure that the battery terminals are not corroded and that
there are no loose connections,  cracks, or loose clamps.
Te r m i n a l

Page 467 of 572

TOYOTA FJ CRUISER 2014 1.G Owners Manual 5
When trouble arises
467
5-1. Essential information
If your vehicle needs to be towed
Before towingThe following may indicate a problem with your transmission. Contact
your Toyota dealer before towin

Page 468 of 572

TOYOTA FJ CRUISER 2014 1.G Owners Manual 468 5-1. Essential information
■Emergency towin g procedure
The engine switch must be in the ACC (engine off) or the ON
(engine running) position.
4WD models with an automatic transmission: Shift th

Page 470 of 572

TOYOTA FJ CRUISER 2014 1.G Owners Manual 470 5-1. Essential information
Towing with a wheel lift-type truck from the rear2WD models Turn the engine switch to the
ACC position.
4WD models Vehicles with an automatic trans-
mission: When not us

Page 482 of 572

TOYOTA FJ CRUISER 2014 1.G Owners Manual 482 5-2. Steps to take in an emergency
CAUTION
■If the tire pressure warning light comes on
Be sure to observe the following precautions. Failure to do so could
cause loss of vehicle control and re

Page 497 of 572

TOYOTA FJ CRUISER 2014 1.G Owners Manual 5
When trouble arises
497
5-2. Steps to take in an emergency
If the engine will not star t
If the engine still does not start after following the correct starting
procedure ( P. 129) or releasing t