2014 TOYOTA AYGO lock

63
1
1-3. Adjustable components (seats, mirrors, steering wheel)
Before driving
AYGO_WE_99G80E
Steering wheel (vehicles with an adjustable type)
CAUTION
Caution while driving
Do not adjust the steering wheel while driving.
Doing so may cause the driver to mishandle the vehicle and cause an acci-
dent, resulting in death or serious injury.
After adjusting the steering wheel
Make sure that the steering wheel is securely locked.
Otherwise, the steering wheel may move suddenly, possibly causing an
accident, and resulting in death or serious injury.
The steering wheel can be adjusted to a comfortable position.
Hold the steering wheel and
push the lever down.
Adjust to the ideal position by
moving the steering wheel.
After adjustment, pull the lever
up to secure the steering
wheel.

67
1
1-4. Opening and closing the windows
Before driving
AYGO_WE_99G80E
Rear windows (5-door models)
The rear windows can be opened and closed.
Open the rear windows
Pull the latch handle toward
you and swing it fully out.
Push the latch handle to
securely lock the latch as
shown in the illustration.
Close the rear windows
Close the rear window as
shown in the illustration.
When closing the window,
make sure it is completely
closed.

69
1
Before driving
AYGO_WE_99G80E
1-5. Refueling
Opening the fuel tank cap
Perform the following steps to open the fuel tank cap:
Before refueling the vehicle
Turn the engine switch off and ensure that all the doors and
windows are closed.
Confirm the type of fuel. (P. 7 0 )
Opening the fuel tank cap
Open the fuel filler door.
Insert the key.
Turn it counterclockwise by
45 degrees
Turn it clockwise by 45
degrees
Remove the key
Turn the fuel tank cap slowly
to open.
If the fuel tank cap cannot be
removed, perform step 2
again.

73
1
Before driving
AYGO_WE_99G80E
1-6. Theft deterrent system
Engine immobilizer system
System maintenance
The vehicle has a maintenance-free type engine immobilizer system.
Conditions that may cause the system to malfunction
If the grip portion of the key is in contact with a metallic object
If the key is in close proximity to or touching a key to the security system
(key with a built-in transponder chip) of another vehicle
The vehicle’s keys have built-in transponder chips that prevent the
engine from starting if a key has not been previously registered in
the vehicle’s on-board computer.
Never leave the keys inside the vehicle when you leave the vehicle.
The system begins operating when either of the following condi-
tions:
When the engine switch is turned from the “ACC” to the “LOCK”
position.
When 20 seconds have elapsed since the engine switch is
turned from the “ON” to the “LOCK” position.
The system is canceled when inserting the registered key in the
engine switch and turning it to the “ACC” position.

78 1-7. Safety information
AYGO_WE_99G80E
CAUTION
While driving
Do not adjust the position of the driver’s seat.
Doing so could cause the driver to lose control of the vehicle.
Do not place a cushion between the driver or passenger and the seatback.
A cushion may prevent correct posture from being achieved, and reduce
the effectiveness of the seat belt and head restraint, increasing the risk of
death or serious injury to the driver or passenger.
Do not place anything under the front seats.
Objects placed under the front seats may become jammed in the seat
tracks and stop the seat from locking in place. This may lead to an acci-
dent, resulting in death or serious injury. The adjustment mechanism may
also be damaged.
Adjusting the seat position
Take care when adjusting the seat position to ensure that other passen-
gers are not injured by the moving seat.
Do not put your hands under the seat or near the moving parts to avoid
injury.
Fingers or hands may become jammed in the seat mechanism.

103
1
1-7. Safety information
Before driving
AYGO_WE_99G80E
Installing child restraints
Follow the child restraint system manufacturer’s instructions. Firmly
secure child restraints to the seats using a seat belt or ISOFIX rigid
anchors. Attach the top strap when installing a child restraint.
Seat belts (An ELR belt
requires a locking clip.)
Vehicles with split rear seats:
ISOFIX rigid anchors (ISOFIX
child restraint system)
Lower anchor is provided for
each rear seat. (Tags display-
ing the location of the anchors
are attached to the seats.)
Vehicles with split rear seats:
Anchor brackets (for top strap)
Anchor bracket is provided for
each rear seat.

104 1-7. Safety information
AYGO_WE_99G80E
Installing child restraints using a seat belt
Rear-facing — Baby seat/child seat
Place the child restraint system
on the rear seat facing the rear
of the vehicle.
Run the seat belt through the
child restraint system and insert
the plate into the buckle. Make
sure that the belt is not twisted.
Install a locking clip near the tab
of the lap and shoulder belt by
inserting the lap and shoulder
webbing through the recesses of
the locking clip. Buckle the belt
again. If the belt has any slack,
release the buckle and reinstall
the locking clip.

105 1-7. Safety information
1
Before driving
AYGO_WE_99G80EForward-facing — Child seat
Place the child restraint system
on the seat facing the front of the
vehicle.
Run the seat belt through the
child restraint system and insert
the plate into the buckle. Make
sure that the belt is not twisted.
Install a locking clip near the tab
of the lap and shoulder belt by
inserting the lap and shoulder
webbing through the recesses of
the locking clip. Buckle the belt
again. If the belt has any slack,
release the buckle and reinstall
the locking clip.