Cleaning
MAINTENANCE7.13
Cleaning the Interior
Frequently inspect and clean the interior to
maintain its appearance and to prevent
premature wear. If possible, immediately wipe
up spills and remove marks. For general
cleaning, wipe interior surfaces using a soft
cloth (such as micro fiber) dampened with a
mixture of warm water and mild non-detergent
cleaner (test all cleaners on a concealed area
before use). To avoid streaks, dry immediately
with a soft lint-free cloth.
Interior Glass
Do not scrape, or use any abrasive cleaning
fluid on glass or mirrored surfaces. This can
damage the reflective surface of the mirror and
the heating elements in the rear window.
Airbags
Do not allow any substance to enter an airbag
cover. This could affect correct operation.
Dashboard and Plastic Surfaces
Do not polish the upper surfaces of the
dashboard. Polished surfaces are reflective and
could interfere with your driving view.
Leather Seats
Leather is prone to dye-transfer which can
cause discoloration, particularly on light
colored leather. White and tan leather is coated
with an anti-soiling treatment. Wipe spills as
soon as possible using a soft cloth moistened
with warm water and non-detergent soap.
Wipe gently in a circular motion. Then wipe dry
using a soft, lint-free cloth. Using detergents or
commercially available leather cleaners and
conditioners is not recommended because they
can discolor or dry out the leather.
Cloth Seats
Wipe spills as soon as possible using a soft
cloth moistened with warm water and
non-detergent soap. Wipe gently in a circular
motion. Then wipe dry using a soft, lint-free
cloth. Vacuum the seats as needed to remove
any loose dirt.
Carpets
Avoid over-wetting carpets. For heavily soiled
areas, use a diluted upholstery cleaner.
Seat Belts
Extend the belts to wipe. Do not use any type
of detergent or chemical cleaning agent. Allow
the belts to dry naturally while extended,
preferably away from direct sunlight.
Tesla Built In Rear Facing Child Seats
Vacuum the seats to remove any loose dirt.
Wipe the seats with a soft cloth dampened with
warm water. You can also use an upholstery
cleaner designer for automotive use. Extend
the belts to wipe. Allow the belts to dry
naturally, preferably away from direct sunlight.
Touchscreen and Instrument Panel
Clean the touchscreen and instrument panel
using a soft lint-free cloth specifically designed
to clean monitors and displays. Do not use
cleaners (such as a glass cleaner) and do not
use a wet wipe or a dry statically-charged cloth
(such as a recently washed microfiber).
Chrome and Metal Surfaces
Polish, abrasive cleaners or hard cloths can
damage the finish on chrome and metal
surfaces.
Cautions for Interior Cleaning
WARNING: If you notice any damage on
an airbag or seat belt, contact Tesla
immediately.
WARNING: Do not allow any water,
cleaners, or fabric to enter a seat belt
mechanism.
CAUTION: Using solvents (including
alcohol), bleach, citrus, naphtha, or
silicone based products or additives on
interior components can cause damage.
book.book Page 13 Friday, July 19, 2013 12:53 PM
Subsystems
SPECIFICATIONS8.7
Suspension
Battery - 12V
Battery - High Voltage
Front Independent, double wishbone
Air spring or coil spring/telescopic damper
Sway bar
Rear Independent
Multi-link
Air spring or coil spring/telescopic damper
Sway bar (air suspension vehicles only)
For alignment values, see page 8.8.
Ty p e E X I D E U 1 R 3 7 0 X P W
Maintenance free, sealed for life
Rating 35 amp-hr
Cold Cranking Amps (CCA): 320 A
Voltage and Polarity 12V negative (-)
Type Liquid-cooled Lithium ion (Li-ion)
Rating 60 or 85 kWh (at beginning of life)
Voltage and Polarity 366V DC
Negative (-) ground
Temperature Range Do not expose the High Voltage Battery to
ambient temperatures above 60° C or below -30°
C for more than 24 hours at a time.
book.book Page 7 Friday, July 19, 2013 12:53 PM
Wheels and TiresWheels and Tires
8.8MODEL S OWNERS MANUAL
Wheels and TiresWheel Specifications
Wheel Alignment Values
Wheel TypeLocationSizeOffset
19”Front 8.0J x 19 40 mm
Rear 8.0J x 19 40 mm
21” - Silver (standard) Front 8.5J x 21 40 mm
21” - Grey (standard) Rear 8.5J x 21 40 mm
21” - Silver and Grey (optional)
Performance Plus vehiclesRear 9.0J x 21 40 mm
Road Wheel Nut Torque 129 lb.ft
Requirements for dynamic wheel balance 14 grams
NOTE: For instructions on how to jack/lift Model S, see page 7.23.
Location
Air SuspensionCoil Suspension
FrontRearFrontRear
Camber -0.75
o +/- 0.35o-1.75o +/- 0.35o-.53o +/- 0.35o-1.55o +/- 0.35o
Camber Split -0.00o +/- 0.20o-0.00o +/- 0.50o-0.00o +/- 0.20o-0.00o +/- 0.50o
Caster 4.00o +/- 0.50on/a 3.70o +/- 0.50on/a
Caster Split 0.00
o +/- 0.20on/a 0.00o +/- 0.20on/a
Single Wheel
To e
OUT 0.05OUT0.15oIN0.05oIN 0.20o +/- 0.05oIN 0.02oOUT0.08oIN0.12oIN 0.185o +/- 0.05o
Thrust Angle n/a 0.00o +/- 0.30on/a 0.00o +/- 0.30o
Suspension
Bolt Height
(at design)213.5 +/- 5 mmStandard models:144 +/- 5 mmPerformance Plus:151 +/- 5 mm230 mm (nominal) 158 mm
(nominal)
book.book Page 8 Friday, July 19, 2013 12:53 PM
