PUBLICATION ORDER FORMS
To order the following manuals, you may use either the
website or the phone numbers listed below. Visa, Mas-
tercard, American Express, and Discover orders are ac-
cepted. If you prefer mailing your payment, please call
for an order form.
NOTE:A street address is required when ordering
manuals (no P.O. Boxes).
Service Manuals
These comprehensive Service Manuals provide the infor-
mation that students and professional technicians need in
diagnosing/troubleshooting, problem solving, maintain-
ing, servicing, and repairing Chrysler Group LLC ve-
hicles. A complete working knowledge of the vehicle,
system, and/or components is written in straightforward
language with illustrations, diagrams, and charts. Diagnostic Procedure Manuals
Diagnostic Procedure Manuals are filled with diagrams,
charts and detailed illustrations. These practical manuals
make it easy for students and technicians to find and fix
problems on computer-controlled vehicle systems and
features. They show exactly how to find and correct
problems the first time, using step-by-step troubleshoot-
ing and drivability procedures, proven diagnostic tests
and a complete list of all tools and equipment.
Owner’s Manuals
These Owner’s Manuals have been prepared with the
assistance of service and engineering specialists to ac-
quaint you with specific Chrysler Group LLC vehicles.
Included are starting, operating, emergency and mainte-
nance procedures as well as specifications, capabilities
and safety tips.
522 IF YOU NEED CONSUMER ASSISTANCE
Fluid Type........................... .474
Shifting ............................. .300
Special Additives ...................... .474
Axle Fluid ............................. .471
Axle Lubrication (Axle Fluid) .................471
Battery ................................ .455
Keyless Transmitter Replacement (RKE) ........28
Belts, Seat ...............................50
Body Builders Guide ........................6
Body Mechanism Lubrication .................457
B-Pillar Location ......................... .351
Brake Control System, Electronic ..............333
Brake Fluid ............................ .469
Brake System ........................... .330
Anti-Lock (ABS) ....................... .331
Fluid Check .......................... .469
Master Cylinder ....................... .469
Parking ............................. .328Warning Light
........................ .202
Brake/Transmission Interlock .................300
Bulb Replacement ........................ .496
Bulbs, Light .............................114
Cab Top Clearance Lights ...................501
Capacities, Antifreeze (Engine Coolant) ..........503
Capacities, Fluid ......................... .503
Caps, Filler Oil (Engine) .......................... .453
Power Steering ........................ .327
Radiator (Coolant Pressure) ................465
Carbon Monoxide Warning ..................110
Cargo Light ............................ .159
Car Washes ............................ .478
Cellular Phone .......................... .268
Center High Mounted Stop Light ..............499
Center Lap Belts ...........................59
Center Seat Storage Compartment .............187
10
INDEX 527
INSTALLATION OF RADIO TRANSMITTING
EQUIPMENTSpecial design considerations are incorporated into this
vehicle’s electronic system to provide immunity to radio
frequency signals. Mobile two-way radios and telephone
equipment must be installed properly by trained person-
nel. The following must be observed during installation.
The positive power connection should be made directly
to the battery and fused as close to the battery as possible.
The negative power connection should be made to body
sheet metal adjacent to the negative battery connection.
This connection should not be fused.
Antennas for two-way radios should be mounted on the
roof or the rear area of the vehicle. Care should be used
in mounting antennas with magnet bases. Magnets may
affect the accuracy or operation of the compass on
vehicles so equipped.The antenna cable should be as short as practical and
routed away from the vehicle wiring when possible. Use
only fully shielded coaxial cable.
Carefully match the antenna and cable to the radio to
ensure a low Standing Wave Ratio (SWR).
Mobile radio equipment with output power greater than
normal may require special precautions.
All installations should be checked for possible interfer-
ence between the communications equipment and the
vehicle’s electronic systems.
