2014 Peugeot RCZ fold seats

11172
72
FAMILIARISATION
- Insert the tongue A in the buckle
A in the
middle of the rear seat.
- Insert the tongue B in the outer buckle B .
REAR SEAT BELTS FOLDING DOWN THE REAR
BACKREST
1. Release the backrest by pulling the
handle from the boot.
ACCESS TO THE REAR SEATS
1. Releasing the backrest.
2. Tilting the backrest.
AT THE REAR
2. Fold the backrest onto the seat cushion from the passenger compartment.
Press the red button
B then the black button A
to remove the seat belt.
The control giving access to the rear
seats does not release the seat.

72
ACCESS TO THE REAR SEATS
REAR SEATS
Two-seat bench with one-piece fi xed seat cushion and one-piece folding
backrest.
The rear headrests are fi xed.
FOLDING DOWN THE REAR BACKREST
RETURNING THE REAR BACKREST TO THE UPRIGHT POSITION
When returning the backrest to the upright position, ensure that it is
locked securely to assure your safety.  Open the boot.
 Pull the backrest release handle, located under the shelf. When transporting long objects, do not place a load of more
than 30 kg on the rear of the backrest.
Do not place rough objects on the rear of the backrest which
could damage it.
 Check that the front seat has been moved forward suffi ciently.
 Pull the control upwards to tilt the backrest.
When the seat is put back in place, the backrest returns to its initial \
position.
The backrest can be folded down to increase the boot storage space.
The backrest release control is located in the boot.
 Check that the front seats have been moved forward suffi ciently.
 Check that nothing has been left on the rear seats.
 Store the seat belt buckles on their respective securing points
located between the headrests.  Fold the backrest down onto the seat cushion.

8/
PRACTICAL INFORMATION
TOOLS AND SPARE WHEEL *
Depending on the country of sale, the vehicle is equipped with the tools\

needed to change a wheel and may also be equipped with a spare
wheel.
The spare wheel is stowed in a protective cover, secured to the boot
fl oor with Velcro
®.
The tools are held in a storage box under the boot fl oor.
Never drive with the rear seat folded when the
spare wheel - or a punctured wheel - is present
in the boot.
Warning marking
"Do not release the backrest of the rear seats!"
* According to country.
Access to the spare wheel *
 Open the boot lid.
 Remove the spare wheel by grasping the grip of its protective cover.
 Position the wheel vertically so as to read the warning markings.
 Remove the Velcro
® located on the tyre tread.
 Detach the straps, located on each sidewall, then slacken them.
 Remove the wheel from its protective cover.
When refi tting the wheel into its cover, place it so that the valve is
opposite the strap fi xings.