Page 168 of 245
166Vehicle care
Wiper blade on the rear window
Lift the wiper arm. Disengage the
wiper blade and remove.
Bulb replacement
Switch off the ignition and switch off
the relevant switch or close the doors.
Only hold a new bulb at the base! Do
not touch the bulb glass with bare
hands.
Use only the same bulb type for
replacement.
The bulbs of the front outer lights are
replaced through openings in the
front wheel housing: turn wheels in away that allows access, release catch
and remove cover.
To replace bulbs on the right side of
the engine compartment, detach the
air hose from the air filter. On the left
side, detach the plug to the fuse box.
Halogen headlights
Headlights have separate systems forhigh beam 1 (inner bulbs) and low
beam 2 (outer bulbs).
Low beam 1. Replace bulbs through the opening in the wheel housing.
Page 171 of 245
Vehicle care169Xenon headlights
Headlamps have separate systems
for low beam 1 (inner bulbs) and high
beam 2 (outer bulbs).
Low beam
9 Danger
Low beam works under extremely
high electrical voltage. Do not
touch. Have bulbs replaced by a
workshop.
High beam
1. Replace bulbs through the openings in the wheel arches.
2. Remove protective cover.
3. Rotate left bulb holder anddisengage.
4.Remove the bulb holder with bulb
from the reflector.
Page 172 of 245
170Vehicle care
5. Detach bulb from bulb holder.
6. Insert new bulb so that the two lugs on the bulb holder engage in
the recesses in the reflector.
7. Rotate bulb holder to the right as far as it will go.
8. Place protective cover in position and close.
Side lights
1. Replace bulbs through the openings in the wheel arches.
2. Remove main beam headlight protective cover.
3.Remove parking light socket from
reflector.