2014 NISSAN X-TRAIL light


> (GLW    0RGHO 7$@
switch onthe ultrasonic sensor.
It is possible toexclude theultrasonic (forexample,
when leaving petsinside thecar ortransporting the
vehicle onaferry) .
T o exclude theultrasonic:
1. Close allthe windows.
2. Place theignition switchinthe ªOFFº position.
3. Push thecancel switch
*
B
located onthe ceiling.
The security indicator lightwillstart flashing
rapidly .
4. Close thedoors, hoodandback door. Lockthem
using theremote controller, theIntelligent Key or
the request switch.Thesecurity indicator lightwill
start flashing fasterandabuzzer willsound once.
The ultrasonic sensorisnow excluded fromthetheft
warning system.Allother functions ofthe system
remain activated untilthetheft warning systemis
disarmed again.
For models without ultrasonic sensor
GUID-F6 883F2C-1 8CE-4385-9B AC-D9C25E45F1E2
How toactivate system:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Close allwindows andsunroof (ifequipped) .
The system canbearmed evenifthe
windows areopen.
2. Place theignition switchinthe ªOFFº position.
3. Remove remotecontroller orthe Intelligent Key
from thevehicle.
4. Close alldoors, hoodandback door. Lockall
doors. Thedoors canbelocked withremote
controller orthe Intelligent Key ,door handle
request switch,powerdoorlockswitch or
mechanical key. 5.
Confirm thatthesecurity indicator lightcomes on.
The security indicator lightstays onfor about 30
seconds. Thevehicle security systemisnow pre-
armed. Afterabout 30seconds thevehicle
security systemautomatically shiftsintothearmed
phase. Thesecurity lightbegins toflash once
every approximately 3seconds. If,during this30
seconds pre-armtimeperiod, thedoor isun-
locked, orthe ignition switchisplaced inªONº ,
the system willnot alarm.
Even when thedriver and/or passengers arein
the vehicle, thesystem willactivate withall
doors, hood,andback doorlocked withthe
ignition switchinthe ªLOCKº position. When
placing theignition switchinthe ªONº position,
the system willbereleased.
Theft warning systemoperation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The vehicle security systemwillgive thefollowing
alarm:
. The hazard indicator orheadlight blinksandthe
horn sounds intermittently .
. The alarm automatically turnsoffafter approxi-
mately 30or50 seconds. However, thealarm
reactivates ifthe vehicle istampered withagain.
The alarm isactivated by:
. Unlocking thedoor oropening theback door
without usingthebutton onthe remote controller
or the Intelligent Key ,the door handle request
switch orthe mechanical key.(Even ifthe door is
opened byreleasing thedoor inside lockknob, the
alarm willactivate.)
. Opening thehood. How
tostop alarm:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
. The alarm willstop onlybyunlocking adoor by
pushing theªUNL OCKº button onthe remote
controller orthe Intelligent Key .
. The alarm willnotstop ifthe ignition switchis
placed inthe ªONº position.
NISSAN ANTI-THEFT SYSTEM (NATS)
GUID-5E4 37D07-076 E-4181-8CCF -57AFFB80C485
The NISSAN Anti-Theft System (NATS) willnotallow
the engine tostart without theuse ofthe registered
NA TS key.
If the engine doesnotstart using theregistered NATS
key ,it may bedue tointerference causedby:
. Another NATS key.
. Automated tollroad device.
. Automated paymentdevice.
. Other devices thattransmit similarsignals.
Start theengine usingthefollowing procedure:
1. Remove anyitems thatmay becausing the
interference awayfromtheNATS key.
2. Leave theignition switchinthe ªONº position for
approximately 5seconds.
3. Place theignition switchinthe ªOFFº orªLOCKº
position, andwait approximately 10seconds.
4. Repeat steps2and 3again.
5. Start theengine.
6. Repeat thesteps above untilallpossible inter-
ferences areeliminated.
If this procedure allowstheengine tostart, NISSAN
recommends placingtheregistered NATS key sepa-
rate from other devices toavoid interference.
Pre-driving checksandadjustments
3-21
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-22
Pre-driving checksandadjustments
FCC Notice:
For USA:
This device complies withPart15ofthe FCC
Rules. Operation issubject tothe following two
conditions: (1)This device maynotcause harm-
ful interference, and(2)this device mustaccept
any interference received,including interference
that may cause undesired operation.
Note: Changes ormodifications notexpressly
approved bythe party responsible forcompli-
ance could voidtheuser's authority tooperate
the equipment.
For Canada:
This device complies withIndustry Canada
licence-exempt RSSstandard(s) .Operation is
subject tothe following twoconditions: (1)this
device maynotcause interference, and(2)this
device mustaccept anyinterference, including
interference thatmay cause undesired operation
of the device.
Security indicator light
GUID-36B6B 0EC-D25F-4E7B-ACC5-8 1BEC5447E82
SIC2045
The security indicator lightislocated onthe meter
panel. Itindicates thestatus ofNA TS. The
light operates whenever theignition switchisin
the ªLOCKº ,ªOFFº orªACCº position. Thesecurity
indicator lightindicates thatthesecurity systems on
the vehicle areoperational.
If NA TS ismalfunctioning, thislight willremain onwhile
the ignition switchisin the ªONº position.
If the light remains onand/or theengine does
not start, contact aNISSAN dealerforNATS
service assoon aspossible. Besure tobring all
NA TS keys thatyouhave when visiting aNISSAN
dealer forservice.
T32A130 827-F9D40B 17-857A-464 9-A8FE-FBF4C5F2F6AB
WARNING:
. The hood mustbeclosed andlatched
securely beforedriving. Failuretodo so
could cause thehood tofly open andresult
in an accident.
. Never openthehood ifsteam orsmoke is
coming fromtheengine compartment to
avoid injury.
HOOD
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
fully open automatically by:
. pushing thepower backdoorswitch
*
A
on the
instrument panelformore than1second
. pushing theback dooropener switch
*
B
. pushing thepower backdoorbutton
*
C
on the
key formore than1second
The hazard flashes 4times andtheoutside chime
sounds whentheback doorstarts opening.
NO TE:
The back doorcanbeopened bythe power back
door switch
*
A
or the power backdoorbutton
*
C
even ifthe back doorislocked. The
back doorcanbeunlocked andopened inde-
pendently ofthe other doors, evenwhen theyare
locked.
P ower open (hands-free operation)
GUID-961B2 5EC-1E8A-4E34-B404-F0 E5F836460B
JVP0286X
When theback doorisfully closed, theback doorwill
fully open automatically byhands-free operation.
1. Carry theIntelligent Key .
2. Put your hand orluggage nearthehands-free
sensor
*
E
, as illustrated, forabout 1second. 3.
Theback doorwillunlock andautomatically open.
The back doorwillopen regardless ofthe lock status.
The hands-free sensorwillnotfunction underthe
following conditions:
. When theIntelligent Key isnot carried withyou.
. When theback doorisopen.
. When automatic operationofthe back dooris
being performed.
The hazard flashes 4times andtheoutside chime
sounds whentheback doorstarts opening.
JVP0302X
NO TE:
. The back doorcannot beclosed automati-
cally byusing thehands-free sensor
*
E
.
. All doors willlock while thehands-free
sensor isbeing used.
. Ifdirt attaches tothe surface ofthe hands-
free sensor, thesensor maynotfunction.
Wipe thesensor usingaclean cloth.
. Ifwater issplashed tothe area around the
hands-free sensor,itmay cause amalfunc-
tion. .
The operating range
*
F
of the hands-free
sensor iswithin 80mm (3.1in)ofthe center
of the sensor.
CAUTION:
. The back doormayopen evenifsomething
other thanyourhand orluggage entersthe
operating rangeofthe hands-free sensor
when theIntelligent Keyiscarried withyou.
. Even ifthe Intelligent Keyiscarried withyou,
the back doorcannot beopened when
something suchasleather glovesabsorb
the light isput tothe hands-free sensor.
. The back doormaynotopen, ifthe head-
lights, sunlight oranother lightsource
shines directly onthe sensor, oran acces-
sory such asaframe isattached tothe
license plate,evenifyour hand orluggage
enters theoperating rangeofthe hands-free
sensor whentheIntelligent Keyiscarried
with you.
. When washing, waxingormaintaining your
vehicle, placingorreplacing thebody cover,
or splashing watertothe area around the
hands-free sensor,placethepower back
door main switch tothe
*
2
position or
*
3
position.
. The hands-free sensordetects objects by
infrared light.Never movethesensor. Ifthe
location ofthe sensor, angleofthe sensor or
direction oflight irradiation change,itmay
lead tonon-operation, incorrectdetection or
other operating malfunctions.
. Ifthe automatic open/close operationis
performed consecutively, thesafety mode
activates andtheoperation cannotbeper-
Pre-driving checksandadjustments
3-25
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-28
Pre-driving checksandadjustments
T32A130 827-14230 D6B-19CF-4A48-BBD4 -ACC6D665 2D3B
JVP0301X
WARNING:
Never adjust thesteering wheelwhiledriving so
that fullattention maybegiven tovehicle
operation.
Pull thelock lever
*
1
down andadjust thesteering
wheel up,down, forward orrearward tothe desired
position. Pushthelock lever upsecurely tolock the
steering wheelinplace.
T32A1308 27-4578F2AF -3374-4B0B-A138-63C 171271EEF
WARNING:
Adjust theposition ofall mirrors beforedriving.
Do not adjust themirror positions whiledriving
so that fullattention maybegiven tovehicle
operation.
INSIDE REARVIEW MIRROR
T32A130827- 2B4716E6-0561-4FDD-9 EC1-77C8FA47E57A
While holding theinside rearview mirror,adjustthe
mirror angles untilthedesired position isachieved.
Manual anti-glare type
T32A130827-7 723D8F6-F363-470C-8 E8B-68483 E73CEA6
SP A2143
Pull theadjusting lever
*
1
when theglare fromthe
headlights ofthe vehicle behindyouobstructs your
vision atnight.
Push theadjusting lever
*
2
during theday forthe best
rearward visibility.
Automatic anti-glaretype
T32A1308 27-C685C23 A-1C40-4AFE-89CB-B04451E4C1E 9
SP A2162
The inside rearview mirrorisdesigned sothat it
automatically changesreflection according tothe
intensity ofthe headlights ofthe vehicle following you.
The anti-glare systemwillbeautomatically turnedon
when youplace theignition switchinthe ªONº
position.
When thesystem isturned on,the indicator light
*
B
will illuminate andexcessive glarefromtheheadlights
of the vehicle behindyouwillbereduced.
Push
the
switch
*
A
for 3seconds tomake the
inside rearview mirroroperate normally andthe
indicator lightwillturn off.Push the
switch again
for 3seconds toturn thesystem on.
Do not hang anyobjects onthe mirror orapply
glass cleaner. Doingsowill reduce thesensitiv-
ity ofthe sensor
*
C
, resulting inimproper
operation.
STEERING WHEEL MIRRORS
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-30
Pre-driving checksandadjustments
T32A1308 27-3EAB989 7-9B0B-47AB-BC92-A0FAB01FF 312
WARNING:
. Never drivethevehicle withtheparking
brake applied. Thebrake willoverheat and
fail tooperate andwilllead toan accident.
. Never release theparking brakefromout-
side thevehicle. Ifthe vehicle moves, itwill
be impossible topush thefoot brake pedal
and willlead toan accident.
. Never usetheshift lever inplace ofthe
parking brake.Whenparking, besure the
parking brakeisfully applied.
. Never leavechildren oradults whowould
normally requirethesupport ofothers alone
in your vehicle. Theycould unknowingly
release theparking brakeandinadvertently
become involved inaserious accident.
PEDAL TYPE
GUID-29 9E5FC1-DA0 3-4467-8F83-07CADBC7 0ECA
SP A2331
T o apply theparking brake,firmlydepress theparking
brake pedal
*
1
.
T o release theparking brake,depress andhold thefoot
brake
*
2
and then fullydepress andrelease the
parking brakepedal
*
1
. Before
driving, besure thatthebrake warning lighthas
turned off.
SWIT CHTYPE (models withelectronic
parking brakesystem)
GUID-99B5D B44-0FAE-40C9 -84EB-B94A2 B3BC9A 2
JVP0310X
The electronic parkingbrakecanbeapplied or
released automatically orby operating theparking
brake switch.
Automatic operation
GUID-2CD5 BAA4-829D-4 ED2-907D-61D3F00A1872
The electronic parkingbrakeisautomatically applied
when theengine isturned offwith theignition switch
(for MTmodel) .
The electronic parkingbrakeisautomatically released
as soon asthe vehicle startswhiletheaccelerator
pedal isdepressed.
For CVT model, thedriver's seatbeltneeds tobe
fastened.
WARNING:
. The electronic parkingbrakewillnotbe
automatically appliedifthe engine is
stopped withoutusingtheignition switch
(for example, byengine stalling) . .
Before leaving thevehicle, movetheshift
lever tothe ª1º(1st) orªRº (Reverse) position
(for MTmodel) orªPº (Park) position (CVT
model) andcheck thattheelectronic parking
brake warning light
is illuminated to
confirm thattheelectronic parkingbrakeis
applied. Theelectronic parkingbrakewarn-
ing light willremain onfor aperiod oftime
after thedriver's doorislocked.
CAUTION:
When parking inan area where theoutside
temperature isbelow 08C (32 8F),do not apply
the parking braketoprevent itfrom freezing.
For safe parking, placetheshift lever inthe ª1º
(1st) orªRº(Reverse) position(forMTmodel) or
ªPº (Park) position (CVTmodel) andsecurely
block thewheels.
NO TE:
. To keep theelectronic parkingbrakere-
leased aftertheengine isturned off,place
the ignition switchinthe ªOFFº position,
depress thebrake pedalandpush down the
parking brakeswitch before opening the
driver's door.
. Ifamalfunction occursinthe electric park-
ing brake system (forexample, dueto
battery discharge) ,contact aNISSAN dealer.
P ARKING BRAKE
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
Manual operation
GUID-904 D853F-51E6-4 D60-943F-53D00450A7A9
The electronic parkingbrakewillnotbeautomatically
applied ifthe engine isstopped withoutusingthe
ignition switch(forexample, byengine stalling) .In such
a case, youhave toapply theparking brakemanually .
T o apply: Pulltheswitch up
*
1
. The indicator light
*
A
will illuminate.
T o release: Withtheignition switchinthe ªONº
position, depressthebrake pedalandpush theswitch
down
*
2
. The indicator light
*
A
will turn off.
Before driving, checkthattheelectronic parkingbrake
warning light
goes out.Foradditional information,
see ªWarning/indicator lightsandaudible remindersº
(P .2-12) .
NO TE:
. Abuzzer willsound ifthe vehicle isdriven
without releasing theparking brake.See
ª Audible remindersº (P.2-19) .
. While theelectronic parkingbrakeisapplied
or released, anoperating soundisheard
from thelower sideofthe rear seat. Thisis
normal anddoes notindicate amalfunction.
. When theelectronic parkingbrakeisfre-
quently applied andreleased inashort
period oftime, theparking brakemaynot
operate inorder toprevent theparking
brake system fromoverheating. Ifthis
occurs, operate theelectronic parkingbrake
switch againafterwaiting approximately 1
minute.
. Ifthe electronic parkingbrakemustbe
applied whiledriving inan emergency, pull
up and hold theparking brakeswitch. When
you release theparking brakeswitch, the
parking brakewillbereleased. .
While pulling upthe electronic parking
brake switch during driving, theparking
brake isapplied andachime sounds. The
electronic parkingbrakewarning lightinthe
meter andinthe parking brakeswitch
illuminate. Thisdoes notindicate amalfunc-
tion. Theelectronic parkingbrakewarning
light inthe meter andinthe parking brake
switch turnoffwhen theparking brakeis
released.
. When pulling theelectronic parkingbrake
switch upwith theignition switchinthe
ªOFFº orªACCº position, theparking brake
switch indicator lightwillcontinue toillumi-
nate forashort period oftime.
When towing atrailer (forAustralia, New
Zealand, SouthAfricaandEurope)
GUID-D10 4E447-6887-4 FAC-B2E9-1 062DDCEF362
Depending onthe weight ofthe vehicle andtrailer and
the steepness ofthe slope, theremaybeatendency
for the vehicle tomove backwards whenstarting froma
standstill. Whenthisoccurs, youcan usetheparking
brake switch inthe same wayasaconventional lever
type parking brake.
Before starting onsloping roadswhentowing atrailer,
be sure toread thefollowing toprevent thevehicle
from moving backward unintentionally .
1. Pull and hold theparking brakeswitch while
depressing theaccelerator pedalandengaging
the clutch (MTmodels) .
2. Release theparking brakeswitch assoon asthe
engine isdelivering enoughtorquetothe wheels.
Pre-driving checksandadjustments
3-31
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
Backing upbehind aprojecting object
T32A1308 27-F39A09 CE-BA79-4 0A1-AF0D-07C3BEDF F944
JVH0247X
The position
*
C
is shown furtherthantheposition
*
B
in the display .However, theposition
*
C
is actually at
the same distance asthe position
*
A
. The vehicle
may hitthe object whenbacking uptothe position
*
A
if the object projects overtheactual backing up
course.
HOW TO ADJUST THESCREEN
GUID-EC79 F14B-6FF6-4 6AD-9BD8-9ECF9919E9F5
Adjusting screen(formodels withnavigation
system)
GUID-76C DE43F-B39B -4083-A190-7 BDE7FDF94E7
Operation withtouch screen:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Push theSETUP button.
2. Select theªSystemº key.
3. Select theªCamera DisplaySettingsº key.
4. Select theitem youwish toadjust.
. Display Mode:
Adjusts tofitthe level oflighting inthe vehicle.
T ouch theªDisplay Modeºkeytocycle through
options ofthe mode (Day,Night andAuto) .
. Brightness:
Adjusts thebrightness ofthe display .
. Contrast :
Adjusts thelevel ofcontrast.
. Color:
Adjusts thelevel ofthe color.
Operation withbuttons:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVH0649X
T o adjust thescreen brightness whentheRearView
Monitor isdisplayed, pushthebrightness control/ display
on´off
button
*
1
.
Adjust brightness tothe preferred settingusingthe
ENTER/Scroll dial
*
2
.
Adjusting screen(formodels without naviga-
tion system)
GUID-F6FEC 62C-0BA6-4A0D-88F6 -7221E5636A D6
JVH0653X
1. Push theENTER/SETTING button
*
2
.
2. Turn theTUNE´FOLDER dial
*
1
to highlight the
ªBrightnessº orthe ªContrastº key.
3. Push theENTER/SETTING button
*
2
.
4. Adjust thelevel using theTUNE´FOLDER dial
*
1
and then push theENTER/SETTING button
*
2
to
apply theadjustment.
NO TE:
Do not adjust theBrightness orContrast ofthe
RearView Monitorwhilethevehicle ismoving.
Display screen,heaterandairconditione r,and audio system
4-9
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
4-10
Display screen,heaterandaircondition er,and audio system
OPERA TINGTIPS
T32A1308 27-4F7D57D D-7549-4CCF -8296-1AB785FE95AF
. When theshift lever isshifted tothe ªRº (Reverse)
position, themonitor screenautomatically
changes tothe RearView Monitormode.
. When theview isswitched, thedisplay images on
the screen maybedisplayed withsome delay.
. When thetemperature isextremely highorlow ,
the screen maynotclearly display objects. Thisis
not amalfunction.
. When strong lightisdirectly coming onthe
camera, objectsmaynotbedisplayed clearly.
This isnot amalfunction.
. Vertical linesmaybeseen inobjects onthe
screen. Thisisdue tostrong reflected lightfrom
the bumper. Thisisnot amalfunction.
. Thescreen mayflicker underfluorescent light.This
is not amalfunction.
. The colors ofobjects onthe RearView Monitor
may differ somewhat fromtheactual colorof
objects. Thisisnot amalfunction.
. Objects onthe monitor maynotbeclear inadark
environment. Thisisnot amalfunction.
. Ifdirt, rainorsnow accumulates onthe camera,
the RearView Monitormaynotdisplay object
clearly .Clean thecamera.
. Donot use alcohol, benzine, orthinner toclean the
camera. Thiswillcause discoloration. To clean the
camera, wipewithacloth dampened withdiluted
mild cleaning agentandthen wipe withadry cloth.
. Donot damage thecamera asthe monitor screen
may beadversely affected.
. Donot use wax onthe camera window.Wipe off
any wax with aclean clothdampened withmild
detergent dilutedwithwater.
T32A1308 27-ECEC19 D2-1058-4FF 9-9BB2-B72671D2617 C
JVH0658X
Models withnavigation system
JVH0648X
Models without navigation system
With theignition switchinthe ON position, pushthe
CAMERA button(models withnavigation system)/
DISP button (models withoutnavigation system)or
move theshift lever tothe ªRº (Reverse) positionto
operate theAround ViewMonitor. Themonitor displays
various viewsofthe position ofthe vehicle.
Available views:
. Bird's-eye View
The surrounding viewofthe vehicle.
. Front-side View
The view around andahead ofthe front passen-
ger's sidewheel. .
Front View
The view tothe front ofthe vehicle.
. Rear View
The view tothe rear ofthe vehicle.
The system isdesigned asan aid tothe driver in
situations suchasslot parking orparallel parking.
JVH0730X
There aresome areaswhere thesystem willnot display
objects. Wheninthe front orthe rear view display ,an
object belowthebumper oron the ground maynotbe
displayed
*
1
. When inthe bird's-eye view,a tall
object neartheseam ofthe camera detecting areas
will notappear inthe monitor
*
2
.
AROUND VIEWMONIT OR(if
equipped)
&RQGLWLRQ
([FHSWIRU&KLQD