Page 47 of 50
20. Disconnect harness connector (1) from Li-ion battery.
Immediately protect the terminals of the disconnected
high voltage harness connector socket using insulated
tape so that they are not exposed.
Touching high voltage components without wearing
appropriate Personal Protective Equipment (PPE) will
cause electrocution.21. Remove nut (A) and disconnect DC/DC converter ground (1) .
Touching high voltage components without wearing
appropriate Personal Protective Equipment (PPE) will
cause electrocution.
22. Release clip, then disconnect harness connector (1) from DC/DC converter.
Touching high voltage components without wearing
appropriate Personal Protective Equipment (PPE) will
cause electrocution.
23. Remove nuts (A) and battery inlet duct B (1) .
Touching high voltage components without wearing
appropriate Personal Protective Equipment (PPE) will
cause electrocution.
1
AAYIA0286ZZ
A1
AAYIA0287ZZ
1
AAYIA0288ZZ
1
A
AAYIA0289ZZ
DG–47
Page 48 of 50
24. Release clips (A) and remove DC/DC converter inletduct (1) .
Touching high voltage components without wearing
appropriate Personal Protective Equipment (PPE) will
cause electrocution.
25. Remove nuts (A) and DC/DC converter (1) .
Touching high voltage components without wearing
appropriate Personal Protective Equipment (PPE) will
cause electrocution.
26. Remove bolts (A) and nuts (B) , then DC/DC converter bracket.
Touching high voltage components without wearing
appropriate Personal Protective Equipment (PPE) will
cause electrocution.
27. Release clip (A) and remove nut (C) , then disconnect main harness connector (B) from Li-ion battery.
Touching high voltage components without wearing
appropriate Personal Protective Equipment (PPE) will
cause electrocution.
1A
AAYIA0290ZZ
1
A
AAYIA0291ZZ
BA
AAYIA0292ZZ
A
C
B
AAYIA0293ZZ
DG–48
Page 49 of 50
28. Disconnect inverter harness connector (A) from Li-ionbattery.
Touching high voltage components without wearing
appropriate Personal Protective Equipment (PPE) will
cause electrocution.
29. Remove gas vent hose (1) from floor panel.
Touching high voltage components without wearing
appropriate Personal Protective Equipment (PPE) will
cause electrocution.
30. Remove bolts (A) and Li-ion battery.
Touching high voltage components without wearing
appropriate Personal Protective Equipment (PPE) will
cause electrocution.
6-3 Li-ion Battery Recycling
The high voltage battery is recyclable. For information regarding recycling of the high voltage battery,
contact the nearest NISSAN dealer or NISSAN Consumer Affairs at: United States: 1-800-647-7261 or in
Canada: 1-800-387-0122.
A
AAYIA0294ZZ
1
AAYIA0295ZZ
A
AAYIA0296ZZ
DG–49
