7
OUTSIDE MIRROR CONTROL SWITCH
The outside mirror control switch is located on the
left side of the instrument panel.
To select the left or right mirror, move the switch 01
to the left or right
Adjust eac h mirror to the desired position using
the control switch
02.
To prevent accidentally moving the mirror, move switch
01 to the center (neutral) position.
For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
FOLDING DOWN THE REAR BENcH SEAT
To fold the seats flat, secure the seat belts on
the seat belt hooks on the side wall. Release the
connector tongue of the rear center seat belt from
the buc
kle then store the connector and seat belt
tongues on the seat belt hook.
Before folding down the seatbac k, tuck the seat belt
buc
kles into the seat cushion pockets.
Fold the seatback down by pulling the adjusting strap 01.
To raise the seatback, lift up the seatback and push it to the upright position until it is latched.
After raising the seatback, pull the seat belt buckles out of the seat cushion pockets until they
are fully extended before using the seat belts.
For more information, refer to the “Safety — Seats, seat belts and supplemental restraint system (se\
ction 1)” of your
Owner’s Manual.
01
02
01
STARTING/STOPPING THE ENGINE
cONTINUOUSLY VARIABLE TRANSMISSION
(N ISSAN Intelligent k
ey® models only - if so equipped)
It is import ant to make sure the Intelligent key is
with you (that is, in your poc ket or purse).
Depress the brake pedal.
Move the shift lever to the P (PARK) position.
Push the ignition switch to start the engine.
TURNING THE ENGINE OFF
Move the shift lever to the P (PARK) position, apply
the parking brake and push the ignition switch.
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.
1523989_14_Cube_QRG_091613.indd 79/16/13 3:31 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.
