2014 MITSUBISHI OUTLANDER HYBRID remote control

Downloaded from www.Manualslib.com manuals search engine 2
Congratulations on purchasing your new Outlander Plug-In Hybrid Electric Vehicle! Here are a few important things you need to know:
A few tips to get you started!
1. We’ve supplied you with charging hooks for you to secure
directly beside your dedicated charging outlet. Simply peel off the backing strip and stick to a dry, clean surface. When charging, simply hang the control box and the charging cable on the hooks.
2. When you get home, make sure you plug in your Outlander and set to charge overnight to take advantage of off-peak electricity rates after 11pm. You can check the remaining time until fully charged on the instrument centre display panel.
3. Your vehicle takes 91 unleaded fuel.
4. Your first service is at 1,500km or within one month. But don’t worry if you forget, we’ll be in contact to remind you.
5. To download your Smartphone application, simply visit Google play or apple iTunes and search ‘Outlander PHEV’ or visit mmnz.co.nz/plug-in-hybrid (applies to VRX model only)
6. Have your Outlander serviced only by an authorised Mitsubishi Motors dealer. For a list of dealers visit
mmnz.co.nz/dealers-and-service.
Fuel saving tips
These fuel saving tips will help you get the most out your Outlander Plug-In Hybrid Electric Vehicle.
1. Keep the battery charged by plugging into the mains
powerpoint. This will ensure you use as much electricity and
as little petrol as possible. It will also help maximize your
Electric Vehicle driving range. Recharging a partially charged
battery will not degrade the battery’s storage capacity, so
when possible plug in the vehicle.
2. To take maximum advantage of owning the Outlander Plug-
In Hybrid be sure to set your charge times to when electricity
power rates are at their lowest. Check with your electricity
provider for your ‘Off-Peak’ details.
3. Before driving, warm or cool the car while it is still connected
to the house power supply. This will reduce the power drain
on the battery and maximise your Electric Vehicle range. On
VRX models you can use the app to do this remotely.
4. Use the seat heaters to warm you up as they use less battery
power than the car heater (VRX model).

Downloaded from www.Manualslib.com manuals search engine 8
6. If the battery temperature becomes too high, charging may stop.
7. Open the cap on the normal charge connector. Hold the handle of the connector and, without pressing the button, insert the connector until it clicks.
8. The charging indicator on the instrument cluster should illuminate. It goes out when charging is completed.
Normal charge connector
Cap
Button
MITSUBISHI Remote Control* enables timed charging and air conditioning on your OUTLANDER PLUG-IN HYBRID. For details, go to mmnz.co.nz/plug-in-hybrid
Charging indicator
* MITSUBISHI Remote Control enables you to remotely control your OUTLANDER PLUG-IN HYBRID using dedicated applications over a connection between your vehicle and a wireless LAN device. Available on VRX models only.
If the charge cable is connected to the charge port, it is not possible to start the vehicle. Operation of the radio, heater, and air conditioning is possible when connected to the charge port.
Once the battery is completely charged, the on board charging system will stop charging the vehicle. There is
no need to unplug the vehicle until use of the vehicle is required.

Downloaded from www.Manualslib.com manuals search engine 20
01 Electric remote-controlled
outside rear-view mirrors switch
Angle adjustment
Set the L-R selector lever to the side you want to adjust. Then, using the adjustor switch, move the mirror up or down, or to the left or to the right.
Retractor switch
Press this switch to retract the outside rear-view mirrors. Pressing the switch again reopens the mirrors.
02 Electric window control
All of the door windows can be opened and closed from the switch console beside the driver’s seat. Push down the switch to open the window. Lift up the switch to close the window. If the driver’s door window switch is pushed down hard, the window opens completely. If the driver’s door window switch is lifted up hard, the window closes completely.
Lock switch
Driver’s door window switch
Front passenger’s door window switch
Rear right door window switch
Rear left door window switch
Multi information display switch
Information screen pop-up
Odometer, outside temperature
Fuel remaining amount, selector lever position, drive battery level
If the lock switch is set to ON, it is no longer possible to open or close the front passenger’s and rear door windows using the switches located there. Pressing the lock switch again cancels the lock.
03 Multi information display
Every time the multi information display switch is pressed, a buzzer sounds. The display shows a wide range of information including warnings, service reminder, average fuel consumption, EV cruising range, and energy flow.
L-R selector leverRetractor switch
Adjustor switch
04 Child protectionBy setting the lever on a rear door to LOCK and then closing the door, it is no longer possible to open the door from the inside regardless of the position of the door lock knob.
This safety feature can be used when children are sitting in the rear seats.