2014 MINI Coupe warning light

[x] Cancel search: warning light

Page 196 of 224

MINI Coupe 2014  Owners Manual Indicator/warning lampsVehicle equipment
This chapter describes all series equipment as
well as country-specific and special equipment
offered for this model series.Therefore, it alsodescribes equipme

Page 197 of 224

MINI Coupe 2014  Owners Manual 12CauseHow to respondThe engine refuses to start.Depress the brake or clutch to start
the engine, refer to page  56.The ignition is switched on and drivers
door is open.Switch off the ignition, refer

Page 198 of 224

MINI Coupe 2014  Owners Manual 12CauseHow to respondConvertible top control failed!The convertible top position and lock
cannot be detected. When the
convertible top has been securely
locked, you can continue driving.
Close the con

Page 199 of 224

MINI Coupe 2014  Owners Manual 12CauseHow to respondThe windshield washer fluid level is too
low.Add washer fluid, refer to page  61,
as soon as possible.Lights up in red:Service is due.Arrange a service appointment.
Check the serv

Page 200 of 224

MINI Coupe 2014  Owners Manual 12CauseHow to respondIndicator lamp 1 flashes:Engine malfunction under high load. High
engine load will result in damage to the
catalytic converter.You can continue your journey, but
moderate your spe

Page 201 of 224

MINI Coupe 2014  Owners Manual 12CauseHow to respondIndication in US models
The handbrake is set.Indication in Canadian models
The handbrake is set.Indication in US models
The handbrake is set while driving.Release the handbrake.In

Page 202 of 224

MINI Coupe 2014  Owners Manual 12CauseHow to respondIndication in US modelsThe vehicle electronics have failed.You cannot continue your journey.
Contact your service center.Indication in Canadian modelsThe vehicle electronics have

Page 204 of 224

MINI Coupe 2014  Owners Manual 12CauseHow to respondLight up in yellow and red:A tire is deflated.Carefully bring the car to a stop. Ad‐
ditional information, refer to
page  83.The Flat Tire Monitor was not initialized.Initialize