2014 MERCEDES-BENZ CLS steering

XPress memory buttonM!and one of the
arrows on adjustmentbutton$within
three seconds.
The parking position is stored if the exterior
mirror does not move.
XIf the exterior mirror moves out of position,
repeat the steps.
Calling upastored parking position
setting
Button for the driver's side exterior mirror
Button for the front-passenger side
exterior mirror
$Adjustmentbutton
!Memory buttonM
XTurn the SmartKey to position2in the
ignition lock (Ypage 147).
XAdjust the exterior mirror on the front-
passenger side using button.
XEngage reverse gear.
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger
side moves back to its original position:
Ras soon as you exceedaspeed of9mph
(15 km/h)
Rif you press buttonfor the exterior
mirror on the driver'sside
Memoryfunction
Storing settings
GWARNING
If you use the memoryfunctiononthe driver's
side while driving, you could lose control of
the vehicle asaresult of the adjustments
being made. There isarisk of an accident.
Only use the memory function on the driver's
side when the vehicle is stationary.
GWARNING
Children could become trapped if they
activate the memory function, particularly
when unattended. There isarisk of injury.
When leavingthe vehicle, always takethe
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
With the memory function,you can store up
to three differentsettings, e.g. for three
differentpeople.
The following settings are stored asasingle
memory preset:
Rposition of the seat, backrest and head
restraint
Ractive multicontour seat: seat contour,
dynamic function level
Rdriver's side: position of the exterior
mirrorsonthe driver's and front-passenger
sides
112Memoryfunction
Seats, steering wheel and mirrors

XAdjust the seat(Ypage 100).
XOn the driver'sside, adjust the steering
wheel (Ypage 106)and the exteriormirrors
(Ypage 109).
XPress memory buttonMand one of the
storage position buttons1,2or3within
three seconds.
The settings are stored in the selected
presetposition.Atone sounds when the
settings have been completed.
Calling upastoredsetting
XPressand hold therelevant storage
position button1,2or3until theseat,
steeringwheel and exteriormirrors are in
the stored position.
iThe settingprocedure is interrupted as
soon as you release the storage position
button.
Memory function113
Seats, steering wheel and mirrors
Z

Cornering lightfunction
The cornering light function improves the
illumination of the road overawideanglein
the direction you are turning, enabling better
visibility in tight bends, for example. It can
only be activated whenthe low-beam
headlamps are switched on.
Active:
Rif you are driving at speeds below 25 mph
(40 km/h)and switch on the turn signal or
turn the steering wheel
Rif you are driving at speeds between
25 mph(40km/h)and 45 mph(70km/h)
and turn the steering wheel
Not active:if you are driving at speeds above
25 mph (40 km/h) or switch off the turn
signalorturn the steering wheel to the
straight-ahead position.
The cornering lamp may remain lit forashort
time, but is automatically switched off after
no more than three minutes.
Active light function
The active light function isasystem that
moves the headlamps according to the
steering movements of the front wheels.In
this way, relevant areasremain illuminated
while driving. Thisallowsyou to identify
pedestrians, cyclists and animals.
Active:whenthe lights are switched on.
Adaptive Highbeam Assist
Important safety notes
GWARNING
Adaptive Highbeam Assist does not recognize
road users:
Rwho have no lights, e.g. pedestrians
Rwho have poor lighting, e.g. cyclists
Rwhose lighting is blocked, e.g. byabarrier
In very rare cases, Adaptive Highbeam Assist
may fail too recognize other road users that
have lights, or may recognize them too late.
In this or similar situations, the automatic
high-beam headlamps will not be deactivated
or activated regardless. There isarisk of an
accident.
Always carefully observe the traffic conditions
and switch off the high-beam headlamps in
good time.
Exterior lighting121
Lights and windshield wipers
Z

GWARNING
Unsuitable footwearcan hinder correctusage
of the pedals, e.g.:
Rshoes with thick soles
Rshoes with high heels
Rslippers
There isarisk of an accident.
Wear suitable footwear to ensure correct
usage of the pedals.
GWARNING
If you switch off the ignition while driving,
safety-relevant functions are only available
with limitations, or not at all. This could affect,
for example, the power steering and the brake
boosting effect. You will require considerably
more effort to steer and brake. There isarisk
of an accident.
Do not switch off the ignition while driving.
GWARNING
If the parking brake has not been fully
released when driving, the parking brake can:
Roverheat and causeafire
Rlose its hold function.
There isarisk of fire and an accident. Release
the parking brake fully before driving off.
!Warm up the engine quickly. Do not use
the engine's full performance until it has
reached operating temperature.
Only shift the automatic transmission to
the desired drive position when the vehicle
is stationary.
Where possible,avoid spinning the drive
wheels when pulling awayonslippery
roads. You could otherwise damage the
drive train.
!AMG vehicles:at low engine oil
temperatures below 68‡(+20 †), the
maximumengine speed is restrictedin
order to protect the engine.Toprotectthe
engine and maintain smooth engine
operation, avoid driving at full throttle when
the engine is cold.
Key positions
SmartKey
To remove the SmartKey
(shift the transmission to positionP)

Power supply for some consumers, such
as the windshield wipers
Ignition (power supply for all consumers)
and drive position
To start the engine
iThe SmartKey can be turned in the
ignition lock even if it is not the correct
SmartKey for the vehicle. The ignition is not
switched on. The engine cannot be started.
KEYLESS-GO
General notes
RDo not store the KEYLESS-GO key together
with:
-electronic devices, e.g.amobile phone
or another SmartKey
-metallic objects, e.g. coins or metal film
RDo not keep the KEYLESS-GO key in metal
objects, e.g. metal cases.
This can affect the functionality of
KEYLESS-GO.
Vehicles with KEYLESS-GO are equipped with
keys featuring the integrated KEYLESS-GO
function andadetachable Start/Stop button.
Driving147
Driving and parking
Z

The DIRECT SELECT lever is on the right of the
steeringcolumn.
iThe DIRECT SELECT lever alwaysreturns
to its original position. The current
transmission positionP,R,NorDappears
in the transmission position display
(Ypage 155) in the multifunction display.
Transmission position and drive
program display
!If the transmission position display in the
multifunction display is not working, you
should pull away carefully to check whether
the desired transmission position is
engaged. Ideally, you should select
transmission positionDand drive program
EorS.Donot restrict the shift range.
Transmission position display
Drive program display
The currenttransmission position and drive
programappear in the multifunction display.
iThe arrows in the transmission position
display show how and intowhich
transmission positionsyou can change
using the DIRECT SELECT lever.
Engaging parkposition P
!If theengine speed is toohigh or the
vehicle is moving, do not shift the
automatic transmission directly fromDto
R,fromRtoDor directly toP.The
automatic transmission could otherwise be
damaged.
Park position with parking lock
\nReverse gear
Neutral
Drive
XPush the DIRECT SELECT lever in the
direction of arrowP.
iThe automatic transmission shifts into
park positionPautomatically:
Rif you open the driver's door while the
vehicle is stationary in transmission
positionDorR
Rif you open the door while traveling at
very low speeds in transmission position
DorR
HOLD function or DISTRONIC PLUS:if the
vehicle is braked using the HOLD function or
DISTRONIC PLUS, the automatic
transmission shifts automatically to
transmission positionP.Inaddition,atleast
one of the following conditionsmust be
fulfilled:
Rthe engineisswitched off.
Rthe driver'sdoor is open and the seat belt
is not in the buckle.
156Automatic transmission
Driving and parking

XTurn drive program selectoruntil the
desired drive program appears in the
multifunction display in the speedometer.
The drive program indicator on drive
program selectorlights up in red.
CControlled
Efficiency
Comfortable, economical
driving
SSportSportydriving style
S+SportPlusExtremely sporty driving
style
MManualManual gear shifting
RSRACE
START
Optimal vehicle
acceleration from a
standstill
iFor further information on the automatic
drive program, see (Ypage 160).
Only change from automatic drive programC,
SorS+to manual drive programMwhen the
vehicle is stationary.
iThe automatic transmission shifts to
automatic drive programCeach time the
engine is started.
iRScannot be selected during normal
driving. For further information on RACE
START, see (Ypage 188).
Steering wheel paddle shifters
Left-hand steeringwheel paddle shifter
Right-hand steeringwheel paddle shifter
In the automatic drive program, you can
restrict or derestrictthe shift range by using
the steeringwheel paddle shifters
(Ypage 162).
iYou can only change gear with the
steeringwheel paddle shifterswhen the
transmission is in positionD.
Automatic drive program
Automatic drive programsEand S
Drive programE(drive programCon MAG
vehicles) is characterized by the following:
Rcomfort-oriented engine and automatic
transmissionsettings
Roptimal fuel consumption resultingfrom
the automatic transmission shifting up
sooner
Rthe vehicle pulling away more gently in
forward and reversegears, unless the
accelerator pedal is depressed fully
Rincreased sensitivity. This improves driving
stability on slippery road surfaces, for
example
Rthe automatic transmission shifting up
sooner.This results in the vehicle being
driven at lower engine speeds and the
wheels being less likely to spin
Drive programS(or, in the case of AMG
vehicles, drive programsSandS+)is
characterized by the following:
Rsporty engine and automatic transmission
settings
Rthe vehicle pulling away in first gear
Rthe automatic transmission shifting up
later
Rthe fuel consumption possibly being higher
asaresult of the later automatic
transmission shift points
160Automatic transmission
Driving and parking

Manual drive program M
General notes
You can activate manualdrive programMin
theEandSautomatic drive programs.
In manualdrive programM,you can briefly
change gearyourself by using the steering
wheel paddle shifters. The transmission must
be in positionD.
Activating
XShift the transmission to positionD.
XPull the left or right steeringwheel paddle
shifter (Ypage 160).
Manual drive programMis temporarily
activated. The selected gear andMappear
in the multifunction display.
Shifting gears
If you pull on the left or right steeringwheel
paddle shifter, the automatic transmission
switches to manual drive programMfor a
limited amount of time. Dependingonwhich
paddle shifter is pulled, the automatic
transmission immediately shifts into the next
gear down or up, if permitted.
XTo shift up:pull the right-hand steering
wheel paddle shifter (Ypage 160).
The automatic transmission shifts up to the
next gear.
iIf the maximum engine speed on the
currently engaged gear is reached and you
continue to accelerate, the automatic
transmission automatically shifts up in
order to prevent engine damage.
XTo shift down:pull on the left-hand
steeringwheel paddle shifter
(Ypage 160).
The automatic transmission shifts down to
the next gear.
iIf the engine exceeds the maximum
engine speed when shiftingdown, the
automatic transmission protects against
engine damage by not shiftingdown.
iAutomatic down shiftingoccurs when
coasting.
Shift recommendation
The gearshift recommendations assist you in
adopting an economical driving style. The
recommended gear is shown in the
multifunction display.
XShift to recommended gearaccording
to gearshift recommendationwhen
shown in the multifunction display of the
instrument cluster.
Disarming
If you have activated manual drive program
M,itwill remain active foracertain amount
of time. Under certain conditions the
minimum amount of time is extended, e.g. in
the case of lateral acceleration, during an
overrun phase or when driving on steep
terrain.
If manual drive programMhas been
deactivated, the automatic transmission
shifts into the automatic drive program that
was last selected, i.e.EorS.
You can also deactivate manual drive
programMyourself:
XPull on the right-hand steeringwheel
paddle shifter and hold it in place
(Ypage 160).
or
XUse the DIRECT SELECT lever to switch the
transmission position.
or
XUse the program selector button to change
the drive program (Ypage 159).
Manual drive programMis deactivated.
The automatic transmission switches into
the automatic drive program that was last
selected, i.e.EorS.
Automatic transmission161
Driving and parking
Z

Shift ranges
Introduction
iYou can restrictorderestrict the shift
range by using the steering wheel paddle
shifters.
When the automatic transmission is in
positionD,itispossible to restrictorexpand
the shift range (Ypage 162).
The shift range selectedisshown in the
multifunctiondisplay. The automatic
transmission shiftsonly as far as the selected
gear.
Shiftrange:
You can use the engine'sbraking
effect
\nYou can use the braking effect of
the engine on downhill gradients
and for driving:
Ron steep mountain roads
Rin mountainous terrain
Rin arduous conditions
To use the braking effect of the
engine on extremely steep downhill
gradients and on long downhill
stretches
Restricting theshiftrange
XPull the left-handsteeringwheel paddle
shifter.
The automatic transmission shifts down
one gear and restrictsthe shift range to the
relevant gear.
iIf the engine exceeds the maximum
engine speed when shifting down, the
automatic transmission protectsagainst
engine damage by not shifting down.
iIf the maximum engine speed for the shift
range is reached and you continue to
accelerate, the automatic transmission
shifts up, even if the shift range is
restricted. This prevents the engine from
overrevving.
Extending the shift range
XPull the right-hand steering wheel paddle
shifter.
The shift range is derestricted.
Clearing the shift range restriction
XPull and hold the right-hand steering wheel
paddle shifter untilDis shown again in the
multifunction display.
The automatic transmission shifts from the
current shift range directly toD.
Selecting the ideal shift range
XPull the left-hand steering wheel paddle
shifter and hold it in position.
The automatic transmission shifts to the
gear which allowsoptimum acceleration
and deceleration. To do this, the automatic
transmission shifts down one or more
gears.
Manual drive program(AMG vehicles
and vehicleswith AMG Sports
package)
Switching on the manualdrive program
XTurn the drive program selector
(Ypage 159) untilMappears in the
multifunction display.
The indicatorMon the drive program
selector lights up in red.
The manual drive program is only available for
AMG vehicles.
Manual drive programMis different from
drive programsSandS+with regard to
spontaneity, responsiveness and
smoothness of gear changes.
Manual drive programMcan be selected
using the drive program selector. In manual
drive programM,you can change gear using
162Automatic transmission
Driving and parking