2014 MERCEDES-BENZ CLS lock

Display messagesPossible causes/consequences andSolutions

Don't Forget Your
Key
The display message is shown foramaximum of 60 seconds and
is onlyareminder.
You have opened the driver'sdoor with the engine switched off.
The KEYLESS-GO key is not in the ignitionlock.
XRemember to take the KEYLESS-GO key with you when you
leave the vehicle.

Key Not Detected
(red display message)
The KEYLESS-GO key is not in the vehicle.
Awarning tone also sounds.
If theengineisswitched off,you can no longer lockthe vehicle
centrally or start the engine.
XPull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
XSecure the vehicle against rolling away (Ypage 167).
XLocate the KEYLESS-GO key.
The KEYLESS-GO key is not detected while the engine is running
because there is interference fromastrongsource of radio waves.
Awarning tone also sounds.
XPull overand stop the vehiclesafelyassoonaspossible,paying
attention to road and traffic conditions.
XSecure the vehicle against rolling away(Ypage 167).
XOperate the vehicle with the SmartKey in the ignition lock.

Key Not Detected
(white display
message)
The KEYLESS-GO key cannot be detected at present.
XChange the location of the SmartKey with the KEYLESS-GO
functionsinthe vehicle.
If the KEYLESS-GO key is still not detected:
XOperate the vehicle with the SmartKey in the ignition lock.

Key Detected in
Vehicle
The KEYLESS-GO key has been detected inside the vehicle during
locking.
XRemove the KEYLESS-GO key from the vehicle.
Display messages263
On-board computer and displays
Z

Display messagesPossible causes/consequences andSolutions

Remove 'Start'
Button and Insert
Key
The KEYLESS-GO keycan continuouslynotbe detected.
KEYLESS-GO is temporarily malfunctioningorisdefective. A
warningtonealso sounds.
XInserttheSmartKey into theignition lockand turnittothe
desiredposition.
XVisitaqualified specialist workshop.

Close Doors to
LockVehicle
At leastone door is open.Awarning tone also sounds.
XClose all doorsand lockthe vehicle again.
Indicator and warning lamps in the
instrument cluster
Warning and indicator lamps
overview
Low-beam headlamps
(Ypage 118)
Parking lamps (Ypage 118)
High-beam headlamps
(Ypage 119)

Turn signal (Ypage 119)
Seat belts (Ypage 265)
(USA) Brakes (Ypage 266)

(Canada)Brakes (Ypage266)
ABS (Ypage267)
ESP®(Ypage269)
ESP®OFF (Ypage269)
SPORT handling mode in
AMG vehicles (Ypage270)
SRS (Ypage272)
\nCheck Engine (Ypage273)
Reserve fuel (Ypage273)
Coolant (Ypage273)
Distance warning signal
(Ypage275)
Tire pressure monitor
(Ypage276)
264Indicator and warninglamps in the instrument cluster
On-board computer and displays

ProblemPossible causes/consequences andSolutions

The yellowABS warning
lamp is lit while the
engine is running.
ABS (Anti-lock Braking System) is deactivated due to a
malfunction.BAS (Brake Assist), BAS PLUS, ESP®(Electronic
Stability Program), PRE-SAFE®,PRE-SAFE®Brake, the HOLD
function and hill start assist are therefore also deactivated, for
example.
ATTENTION ASSIST is deactivated.
GWARNING
The brake system continues to function normally, but without the
functions listed above. The wheels could therefore lock if you
brake hard, for example.
The steerability and braking characteristics may be severely
affected. The braking distance in an emergency braking situation
can increase.
If ESP®is not operational, ESP®is unable to stabilize the vehicle.
There is an increased risk of skidding and an accident.
XObserve the additional display messages in the multifunction
display.
XDrive on carefully.
XVisitaqualified specialist workshop.
If the ABS control unit is faulty, there is alsoapossibility that other
systems, such as the navigation system or the automatic
transmission, will not be available.
Indicator and warning lampsinthe instrument cluster267
On-board computer and displays
Z

ProblemPossible causes/consequences andSolutions

The yellowABS warning
lamp is lit while the
engine is running.
ABS is temporarily unavailable. BAS,BAS PLUS, ESP®,EBD
(electronic brake force distribution), PRE-SAFE®,
PRE-SAFE®Brake, the HOLD function, hill start assist are therefore
also deactivated, for example.
Possible causes are:
Rself-diagnosis is not yet complete.
Rthe on-board voltage may be insufficient.
ATTENTION ASSIST is deactivated.
GWARNING
The brake system continues to function normally, but without the
functions listed above. The front and rear wheels could therefore
lock if you brake hard, for example.
The steerability and braking characteristics may be severely
affected. The braking distance in an emergency braking situation
can increase.
If ESP®is not operational, ESP®is unable to stabilize the vehicle.
There isarisk of an accident.
XCarefullydrive onasuitable stretch of road, making slight
steering movementsataspeed above 12 mph (20 km/h).
The functions mentioned above are available again when the
warning lamp goes out.
If the warning lamp is still on:
XObserve the additional display messages in the multifunction
display.
XDrive on carefully.
XVisitaqualified specialist workshop.
268Indicator and warning lampsinthe instrument cluster
On-board computer and displays

ProblemPossible causes/consequences andSolutions

The yellowABS warning
lamp is lit while the
engine is running. A
warning tone also
sounds.
EBD is not available due toamalfunction.Therefore, ABS,BAS,
BAS PLUS, ESP®,PRE-SAFE®,PRE-SAFE®Brake, the HOLD
function and hill start assist are also unavailable, for example.
ATTENTION ASSIST is deactivated.
GWARNING
The brake system continues to function normally, but without the
functions listed above. The front and rear wheels could therefore
lock if you brake hard, for example.
The steerability and braking characteristics may be severely
affected. The braking distance in an emergency braking situation
can increase.
If ESP®is not operational, ESP®is unable to stabilize the vehicle.
There is an increased risk of skidding and an accident.
XObserve the additional display messages in the multifunction
display.
XDrive on carefully.
XVisitaqualified specialist workshop.
(USA only)

(Canada only)
 
The red brake warning
lamp, the yellow ESP®
and ESP®OFF warning
lamps and the yellow
ABS warning lamp are
lit while the engine is
running.
ABS and ESP®are not available due toamalfunction.Therefore,
BAS,BAS PLUS, EBD,PRE-SAFE®,PRE-SAFE®Brake, the HOLD
function and hill start assist, for example, are not available either.
ATTENTIONASSIST is deactivated.
GWARNING
The brake system continues to function normally, but without the
functions listed above. The front and rear wheels could therefore
lock if you brake hard, for example.
The steerability and braking characteristics may be severely
affected. The braking distance in an emergency braking situation
can increase.
If ESP®is not operational, ESP®is unable to stabilize the vehicle.
There is an increased risk of skidding and an accident.
XObserve the additional displaymessages in the multifunction
display.
XDrive on carefully.
XVisitaqualified specialist workshop.
Indicator and warning lampsinthe instrument cluster269
On-board computer and displays
Z

ProblemPossible causes/consequences andSolutions

The red coolant
warning lamp comes on
while the engine is
running.
The coolant level is too low.
If the coolant level is correct, the airflow to the engine radiator
may be blocked or the electric engine radiator fan may be
malfunctioning.
The coolant is too hot and the engine is no longer being cooled
sufficiently.
XObserve the additional display messages in the multifunction
display.
XPull over and stop the vehicle safely and switch off the engine,
paying attention to road and traffic conditions.
XSecure the vehicle against rolling away (Ypage 167).
XLeave the vehicle and keepasafe distance from the vehicle until
the engine has cooled down.
XCheck the coolant level and add coolant, observing the warning
notes (Ypage 308).
XIf you need to add coolant more often than usual, have the
engine coolant system checked.
XMake sure that the air supply to the engine radiator is not
blocked, e.g. by snow, slush or ice.
XDo not start the engine again until the coolant temperature is
under 248‡(120 †). Otherwise,the engine couldbedamaged.
XDrive to the nearest qualified specialist workshop.
XAvoid subjecting the engine to heavy loads, e.g. driving in
mountainousterrain, and stop-and-go traffic.

The red coolant
warning lamp comes on
while the engine is
running.Awarning tone
also sounds.
The coolant temperature has exceeded 248‡(120 †). The
airflow to the engine radiator may be blocked or the coolant level
may be too low.
GWARNING
The engine is not being cooledsufficiently and may be damaged.
Do not drive whenyour engine is overheated. This can cause some
fluids which may have leaked into the engine compartment to
catchfire.
Steam from the overheated engine can also cause serious burns
which can occur just by opening the hood.
There isarisk of injury.
XObserve the additional display messages in the multifunction
display.
XPull over and stop the vehicle safely and switch off the engine,
paying attention to road and traffic conditions.
XSecure the vehicle against rolling away (Ypage 167).
274Indicator and warning lampsinthe instrument cluster
On-board computer and displays

ProblemPossible causes/consequences andSolutions
XLeave the vehicle and keepasafe distance from the vehicle until
the engine has cooled down.
XCheck the coolant level and add coolant, observing the warning
notes (Ypage 308).
XIf you need to add coolant more often than usual, have the
engine coolant system checked.
XMake sure that the air supply to the engine radiator is not
blocked, e.g. by snow, slush or ice.
XAt coolant temperatures under 248‡(120 †), drive to the next
qualified specialist workshop.
XAvoid subjecting the engine to heavy loads, e.g. driving in
mountainousterrain, and stop-and-go traffic.
Driving systems
ProblemPossible causes/consequencesandSolutions

The red distance
warning lamp lights up
while the vehicle is in
motion.
The distance to the vehicle in front is too smallfor the speed
selected.
XIncrease the distance.

The red distance
warning lamp lights up
while the vehicle is in
motion.Awarning tone
also sounds.
You are approachingavehicle orastationary obstacle in your line
of travel at too highaspeed.
XBe prepared to brake immediately.
XPay careful attention to the traffic situation. You may have to
brake or take evasive action.
Further information on PRE-SAFE®Brake (Ypage 72).
Indicator and warning lampsinthe instrument cluster275
On-board computer and displays
Z

Useful information
iThis Operator's Manual describes all
models and all standard and optional
equipment of your vehicle available at the
time of publication of the Operator's
Manual. Country-specific differences are
possible. Please notethat your vehicle may
not be equipped with all features
described. This also applies to safety-
related systemsand functions.
iRead the information on qualified
specialist workshops: (Ypage 26).
Stowage areas
Loading guidelines
GWARNING
If objects, luggage or loads are not secured or
not secured sufficiently, they could slip, tip
over or be flung around and thereby hit vehicle
occupants.There isarisk of injury,
particularly in the eventofsudden braking or
asuddenchange in direction.
Always store objectssothat they cannot be
flung around. Secure objects, luggageor
loads against slipping or tipping before the
journey.
GWARNING
Combustion engines emit poisonous exhaust
gases such as carbon monoxide. Exhaust
gases can enter the vehicle interior if the
trunk lid is open when the engine is running,
especially if the vehicle is in motion. There is
arisk of poisoning.
Always switch off the engine before opening
the trunk lid. Never drive with the trunk lid
open.
The handling characteristics ofaladen
vehicle are dependent on the distribution of
the load within the vehicle. For this reason,
you should observe the following notes when
transportingaload:
RNever exceed the maximum permissible
gross vehicle weight or the gross axle
weight rating of the vehicle (including
occupants). The values are specified on the
vehicle identification plate on the B-pillar of
the driver's door.
RThe trunk is the preferred place to carry
objects.
RPosition heavy loads as far forwards as
possible and as low down in the trunk as
possible.
RThe load must not protrude above the
upper edge of the seat backrests.
RAlways place the load against the rear or
front seat backrests. Make sure that the
seat backrests are securely locked into
place.
RAlways place the load behind unoccupied
seats if possible.
RUse the cargo tie down rings and the parcel
nets to transport loads and luggage.
RUse cargo tie-down rings and fastening
materials appropriate for the weight and
size of the load.
RSecure the load with sufficiently strongand
wear-resistant tie-downs. pad sharp edges
for protection.
Stowage space
Important safety notes
GWARNING
If you do not correctly store objectsinthe
vehicle interior, they can slip or be flung
around, thus strikingvehicle occupants.
There isarisk of injury, especially when
braking or abruptly changing directions.
278Stowage areas
Stowage and features