2014 MERCEDES-BENZ CLA garage door opener

Exterior mirrors
Adjusting.........................................97
Dipping (automatic).........................99
Folding in/out(automatically).........98
Folding in/out(electrically).............98
Folding in whenlocking (on-board
computer)......................................209
Out of position (troubleshooting).....98
Setting.............................................98
Storing settings (memory function) 100
Storing the parking position ............. 99
Eyeglasses compartment.................255
F
Fillercap
see Fuel filler flap
First-aid kit......................................... 294
Flat tire
MOExtended tires..........................295
Preparing the vehicle.....................295
TIREFIT kit ...................................... 296
Floormats...........................................277
Fog lamps
Extended range .............................. 108
Switching on/off...........................105
Front fog lamps
Display message............................225
Switching on/off...........................105
Fuel
Additives........................................347
Consumption statistics..................197
Displaying the current
consumption..................................198
Displaying the range......................198
Driving tips....................................157
Fuel gauge.......................................29
Grade (gasoline)............................346
Important safety notes..................346
Notes for AMG vehicles.................346
Premium-grade unleaded gasoline.346
Problem (malfunction)...................153
Refueling ........................................ 151
Tank content/reserve fuel.............346
Fuel filler flap
Opening/closing............................152
Fuel level
Calling up the range (on-board
computer)......................................198
Fuel tank
Capacity........................................346
Problem (malfunction)...................153
Fuses
Allocation chart.............................309
Before changing.............................308
Fuse box in the engine
compartment.................................308
Fuse box in the front-passenger
footwell .......................................... 309
Important safety notes..................308
G
Garage door opener
Clearing the memory.....................275
Important safety notes..................273
Opening/closing the garage door..275
Programming (button in the rear-
view mirror)...................................273
Gear indicator (on-board computer)209
Gear or selector lever (cleaning
guidelines).........................................290
Genuine parts......................................21
Glove box...........................................255
H
Handbrake
see Parking brake
Hazard warning lamps......................107
Display message............................240
Headlamps
Adding fluid to cleaning system.....283
Cleaning system (function)............107
Fogging up.....................................109
see Automatic headlamp mode
Head restraints
Adjusting.........................................93
Adjusting (electrically).....................94
Adjusting (manually)........................93
Adjusting (rear)................................94
Installing/removing (rear)................94
Heating
see Climate control
10Index

PARKTRONIC
Deactivating/activating.................177
Driving system...............................175
Function/notes.............................175
Important safety notes..................175
Problem (malfunction)...................178
Range of the sensors.....................175
Warning display.............................176
PASSENGERAIR BAG OFF
Problems (malfunction) .................. 222
PASSENGER AIR BAG OFF indicator
lamp...................................................... 45
Plastic trim (cleaning instructions).290
Power washers..................................286
Power windows
see Side windows
Program selector button..................146
Protection of the environment
General notes..................................21
Pulling away
Automatic transmission.................138
Q
Qualifiedspecialistworkshop...........25
R
RACE START (AMG vehicles).............173
RACETIMER (on-board computer)....210
Radar sensor system
Activating/deactivating.................208
Display message............................230
Radio
Selectingastation.........................200
see separate operating instructions
Radio-wave reception/
transmission in the vehicle
Declarationofconformity................24
Reading lamp.....................................110
Rear compartment
Setting the airvents......................133
Rear fog lamp
Changing bulbs..............................114
Display message............................225
Switching on/off...........................106
Rear lamps
see Lights
Rear seats
Folding the backrestforwards/
back ............................................... 258
Rear view camera
Cleaning instructions.....................289
Function/notes.............................182
Switching on/off...........................183
Rear-view mirror
Anti-glare (manual)..........................97
Dipping (automatic).........................99
Rear window defroster
Problem (malfunction)...................131
Switching on/off...........................130
Refrigerant (air-conditioning
system)
Important safety notes..................350
Refueling
Fuel gauge.......................................29
Important safety notes..................151
Notes for AMG vehicles.................346
Refueling process..........................152
see Fuel
Remote control
Garage door opener.......................273
Programming (garage door opener) 273
Replacing bulbs
Important safety notes..................111
Overview of bulbtypes..................111
Removing/replacing the cover
(front wheel arch)..........................112
Reporting safety defects....................26
Reserve (fuel tank)
see Fuel
Reserve fuel
Display message............................228
Warning lamp ................................. 248
see Fuel
Residual heat (climate control)........131
Restraint system
see SRS (Supplemental Restraint
System)
Reverse gear (selector lever)...........144
Reversing feature
Panorama sliding sunroof................86
Roller sunblinds...............................87
Side windows...................................83
Roadside Assistance (breakdown)....23
14Index

Overheadcontrol panel
FunctionPage

Switches the rear
compartment interior
lighting on/off110
Switches the right-
hand reading lamp on/off110
"Switches the front
interiorlighting/automatic
interior lighting control off110
!\nMB Info call button
(mbrace system)267
Rear-view mirror97
Buttons for the garage door
opener275
 SOS button (mbrace
system)265
FunctionPage
Roadside Assistance
call button (mbrace
system)266
Eyeglasses compartment255
Opens/closes the
panorama roof with power
tilt/sliding panel with roller
sunblinds86
Switches the front
interior lighting on110
Switches the left-
hand reading lamp on/off110
34Overhead control panel
At a glance

Garage door opener
Important safety notes
GWARNING
When you operate or programthe garage door
with the integrated garage door opener,
persons in the range of movement of the
garage door can become trapped or struck by
the garage door. There isarisk of injury.
When using the integrated garage door
opener, always make sure that nobody is
within the range of movement of the garage
door.
GWARNING
Combustion engines emit poisonous exhaust
gases such as carbonmonoxide. Inhaling
these exhaust gases leads to poisoning. There
is a risk of fatal injury. Therefore never leave
the engine running in enclosed spaces
without sufficient ventilation.
The HomeLink®garage door opener
integrated in the rear-view mirror allows you
to operate up to three different door and gate
systems.
Use the integrated garage door opener only
on garage doors that:
Rhave safety stop and reverse features and
Rmeet current U.S. federal safety standards
When programming a garage door opener,
park the vehicle outside the garage.
iCertain garage door drives are
incompatible with the integrated garage
door opener. If you have difficulty
programming the integrated garage door
opener, contact an authorized Mercedes-
Benz Center.
Alternatively, you can call the following
telephone assistance services:
RUSA:Mercedes-Benz Customer
Assistance Center at
1-800-FOR-MERCedes
RCanada:Customer Service at
1-800-387-0100
RHomeLink®hotline 1-800-355-3515
(free of charge)
More information on HomeLink®and/or
compatible products is also available
online at http://www.homelink.com.
iNotes on the declaration of conformity
(Ypage 24).
USA: FCC ID: CB2HMIHL4
Canada: IC: 279B-HMIHL4
Programming
Programming buttons
Observe the "Important safety notes"
(Ypage 273).
Integrated garage door opener in the rear-viewmirror
Garage door remote controlis not part of
the integrated garage door opener.
XThe first time before programming, clear
the integrated garage door opener memory
(Ypage 275).
XTurn the SmartKey to position2in the
ignition lock.
Features273
Stowage and features
Z

XPress and hold one of buttonsto!on
the integrated garage door opener.
After a short time, indicator lamplights
up yellow.
iIndicator lamplights up yellow as soon
as button,"or!is programmed for
the first time. If the selected button has
already been programmed, indicator
lampwill only light up yellow after ten
seconds have elapsed.
XRelease button,"or!. Indicator
lampflashes yellow.
XPoint garage door remote control
towards buttonsto!on the rear-view
mirror at a distance of 2 to 8 inches (5 to
20 cm).
iThe required distance between remote
controland the integrated garage door
opener depends on the garage door drive
system. Several attempts might be
necessary. You should test every position
for at least 25 seconds before trying
another position.
XPress and hold button on remotecontrol
until indicator lamplights up green.
If indicator lamplights up green or
flashes, then programming has been
successful.
XRelease button on remote controlfor
the garage door drive system.
XIf indicator lamplights up red: repeat
the programming procedure for the
corresponding button on the rear-view
mirror. When doing so, vary the distance
between remote controland the rear-
view mirror.
iIf the indicator lamp flashes green after
successful programming, the garage door
system is using a rolling code. After
programming, you must synchronize the
garage door opener integrated in the rear-
view mirror with the receiver of the garage
door system.
Synchronizing the rolling code
Observe the "Important safety notes"
(Ypage 273).
Your vehicle must be within reach of the
garage door or exterior gate drive. Make sure
that neither your vehicle nor any persons/
objects are present within the sweep of the
door or gate.
XTurn the SmartKey to position2in the
ignition lock.
XPress the program button of the door or
gate drive (see the door or gate drive
operating instructions, e.g. under
"programming of additional remote
controls").
iUsually, you now have 30seconds to
initiate the next step.
XPress previously programmed button,
"or!of the integrated garage door
opener until the door closes.
The rolling code synchronization is then
complete.
Notes on programming the remote
control
Canadianradio frequency laws require a
"break" (or interruption) of the transmission
signals after broadcasting for a few seconds.
Therefore, these signals may notlast long
enough for the integrated garage door
opener. The signal is notrecognized during
programming. Comparable with Canadian
law, some U.S.garage door openers also
feature a "break".
Proceed as follows:
Rif you live in Canada
Rif you have difficulties programming the
garage door opener (regardless of where
you live) when using the programming
steps
274Features
Stowage and features

XPress and hold one of buttonsto!on
the integrated garage door opener.
After a short time, indicator lamplights
up yellow.
XRelease the button.
Indicator lampflashes yellow.
XPress button of garage door remote
controlfor two seconds, then release it
for two seconds.
XPress button again for two seconds.
XRepeat this sequence on button of
remote controluntil indicator lamp
lights up green.
If indicator lampturns red, repeat the
process.
XContinue with the other programming
steps (see above).
Problems when programming
If you are experiencing problems
programming the integrated garage door
opener on the rear-view mirror, take note of
the following instructions:
RCheck the transmitter frequency of garage
door drive remote control.This can
usually be found on the back of the remote
control.
The integrated garage door opener is
compatible with devices that have units
which operate in the frequency range of
280to 433MHz.
RReplace the batteries in garage door
remote control.This increases the
likelihood that garage door remote control
will transmit a strongand precise signal
to the integrated garage door openerinthe
rear-view mirror.
RWhen programming, hold remote control
at varying distances and angles from the
button that you are programming. Try
various angles at a distance between 2and
12 inches (5to 30 cm) or at the same angle
but at varying distances.
RIf another remote control for the same
garage door drive is available, repeat the
same programming steps with this remote
control. Before performing these steps,
make sure that new batteries have been
installed in garage door drive remote
control.
RNote that some remote controls only
transmit for a limited amount of time (the
indicator lamp on the remote control goes
out). Press button on remote control
again before transmission ends.
RAlign the antenna cable of the garage door
opener unit. This can improve signal
reception/transmission.
Opening/closing the garage door
After it has been programmed, the integrated
garage door opener performs the function of
the garage door system remote control.
Please also read the operating instructions
for the garage door system.
XTurn the SmartKey to position2in the
ignition lock.
XPress button,"or!which you have
programmed to operate the garage door.
Garage door system with a fixed code:
indicator lamplights up green.
Garage door system with a rolling code:
indicator lampflashes green.
iThe transmitter will transmit a signal as
long as the button is pressed. The
transmission is halted after a maximum of
ten seconds and indicator lamplights
up yellow. Press button,"or!again
if necessary.
Clearing the memory
XTurn the SmartKey to position2in the
ignition lock.
XPress buttonsand!.
The indicator lamp lights up yellow.
XPress and hold buttonsand!until the
indicator lamp turns green.
Features275
Stowage and features
Z

iMake sure that you clear the memory of
the integrated garage door opener before
selling the vehicle.
Compass
Calling up the compass
The compass displays in which compass
direction the vehicle is currently traveling:N,
NE,E,SE,S,SW,WorNW.
To receive a correct display in rear-view
mirror, the compass must be calibrated
and the magnetic field zone set.
Setting the compass
XDetermine your position using the following
zone maps.
North America zone map
South America zone map
XPush a round pen into opening
"(Ypage 276) for approximately three
seconds.
The zone currently selected appears in
compass display(Ypage 276).
XTo selectthe zone:push a round pen into
opening"(Ypage 276) until the desired
zone is selected.
If, after a few seconds, the display in
compass display(Ypage 276) changes
direction, the zone has been selected.
Calibrating the compass
XMake sure that there is sufficient space for
you to drive in a circle without impeding
traffic.
In order to calibrate the compass correctly,
do the following:
Rcalibrate the compass in the open and not
in the vicinity of steel structures or high-
voltage transmission lines.
Rswitch off electrical consumers such as the
climate control, windshield wipers or rear
window defroster.
Rclose all doors and the trunk lid.
XSwitch on the ignition.
XPush a round pen into opening
"(Ypage 276) for approximately six
276Features
Stowage and features