2014 MERCEDES-BENZ CLA belt

[x] Cancel search: belt

Page 59 of 354

MERCEDES-BENZ CLA 2014  Owners Manual in the installation instructions that are
included with the child restraint system.
Always read and follow the manufacturer's
instructions when using an infant or child
restraint system or booster

Page 60 of 354

MERCEDES-BENZ CLA 2014  Owners Manual for an air bag deactivation system is
installed on the front-passenger seat.
Ron vehicles with an air bag deactivation
system on the front-passenger seat, if the
�PASSENGER AIR BAG OFF indicator
lamp

Page 61 of 354

MERCEDES-BENZ CLA 2014  Owners Manual rings�for two LATCH-type (ISOFIX) child
restraint systems are installed on the left and
right of the rear seats.
Non-LATCH-type (ISOFIX) child seats may
also be used and can be installed using the
ve

Page 67 of 354

MERCEDES-BENZ CLA 2014  Owners Manual braking function. COLLISION PREVENTION
ASSIST PLUS can help you to minimize the
risk of a front-end collision with a vehicle
ahead or reduce the effects of such a
collision. If COLLISION PREVENTION AS

Page 92 of 354

MERCEDES-BENZ CLA 2014  Owners Manual Useful information
iThis Operator's Manual describes all
models and all standard and optional
equipment of your vehicle available at the
time of publication of the Operator's
Manual. Country-s

Page 93 of 354

MERCEDES-BENZ CLA 2014  Owners Manual The seat belt should:
Rfit snugly across your body
Rbe routed across the middle of your
shoulder
Rbe routed in your pelvic area across the
hip joints
XBefore starting off, adjust the rear-view
mirror

Page 95 of 354

MERCEDES-BENZ CLA 2014  Owners Manual Adjusting the seats electrically
�Head restraintheight2
�Seat cushion angle
�"Seat height
�!Seat fore-and-aft adjustment
�Backrest angle
iYou can store the seat settings using the
memory function (

Page 98 of 354

MERCEDES-BENZ CLA 2014  Owners Manual Problems with the seat heating
ProblemPossible causes/consequences and�Solutions
The seat heating has
switched off
prematurely or cannot
be switched on.
The on-board voltage is too low because too ma