2014 MERCEDES-BENZ CL-Class warning

[x] Cancel search: warning

Page 68 of 494

MERCEDES-BENZ CL-Class 2014 C217 Owners Manual The brakes will function as usual once you
release the brake pedal. BAS is deactivated.
BAS PLUS (Brake Assist System
PLUS)
BAS PLUS is only available in vehicles
equipped with DISTRONIC PLUS.
i Obser

Page 69 of 494

MERCEDES-BENZ CL-Class 2014 C217 Owners Manual Following damage to the front end of the
vehicle, have the configuration and operation
of the radar sensors checked at a qualified
specialist workshop. This also applies to
collisions at low speeds wh

Page 70 of 494

MERCEDES-BENZ CL-Class 2014 C217 Owners Manual !
Avoid spinning the driven wheels for an
extended period with ESP ®
deactivated.
You could otherwise damage the drivetrain.
X To deactivate:(Y page 348).
The å ESP®
OFF warning lamp in the
instrum

Page 71 of 494

MERCEDES-BENZ CL-Class 2014 C217 Owners Manual you will be warned visually and acoustically
as well as by automati
cbraking. PRE-SAFE ®
Brake cannot prevent a collision without your
intervention.
Starting at a speed of around 4 mph
(7 km/h), this

Page 72 of 494

MERCEDES-BENZ CL-Class 2014 C217 Owners Manual In particular, the detection of obstacles can
be impaired if:
R
dirt on the sensors or anything else
covering the sensors
R snow or heavy rain
R interference by other radars ources
R there are strong

Page 76 of 494

MERCEDES-BENZ CL-Class 2014 C217 Owners Manual Vehicle equipment
i This Operators Manual describe sall
models and all standard and optional
equipmen tofyour vehicle available at the
time of publication of the Operators
Manual. Country-specific d

Page 80 of 494

MERCEDES-BENZ CL-Class 2014 C217 Owners Manual Removing the mechanical key
X
Push release catch :in the direction of
the arrow and at the same time remove
mechanical key ;from the SmartKey. SmartKey battery
Important safety notes It is advisable t

Page 83 of 494

MERCEDES-BENZ CL-Class 2014 C217 Owners Manual Problem Possible causes/consequences and
M Solutions
The engine cannot be
started using the
SmartKey. The on-board voltage is too low.
X
Remove the SmartKey and re-insert it into the ignition lock.
X