2014 MERCEDES-BENZ C-Class clock

Function Page
0072
0061
Accepts a call 49
Dials a number 50
Redial 51
0073
0063
Mute 21
Switches the hands-free
system on/off Function Page
0074
0076
Rejects a call 49
Ends an active call 51
Audio 20 controller
Introduction You can use the controller to select functions
in the display. To do so, move the selection
bar.
0043
Controller The controller can be:
R
pressed briefly or pressed and held
R turned clockwise or counterclockwise
R slid to the left, to the right, up or down In this way you can:
R
scroll within menus
R select menu items
R exit menus
i If your vehicle is equipped with Becker ®
MAP PILOT, you can slide the controller
diagonally to move the map ( Ypage 40). 14
Audio 20 operating systemAt a glance

Audio system features
i These Operating Instructions describe all
standard and optional equipment available
for your audio device at the time of going
to print. Country-specific deviations are
possible. Please note that your audio equip-
ment may not offer all the features descri-
bed. System menu
Calling up the System basic menu
X Press 0066.
or
X Select System
System from the main function bar
using the controller (slide 00520064,009500520096or
turn 00790052007A ) and press 0098to confirm. Full screen display
X With the menu item Full Screen Full Screenhigh-
lighted, press 0098the controller.
The main function bar and the submenu bar
disappear.
X To make the main function bar and sub-
menu bar reappear: press0098the control-
ler. Changing the screen
You can change the screen to display either
the clock or the consumption indicator.
X Slide 009500520096or turn 00790052007Athe controller.
The display changes. Switching the display on/off
X To call up the basic menu: press0066.
X Switch to the submenu bar by sliding 00520064
the controller.
X Select Display Display Off
Offby sliding 00520096the con-
troller and press 0098to confirm.
X To switch the display on again: press
0098.
or
X Press 0041.
i You can also press one of the function
buttons, such as the 003Abutton, to dis-
play the relevant basic menu. 30
Switching the display on/offSystem settings

SIRIUS XM Radio employs a fleet of high-
performance satellites to broadcast around
the clock in the contiguous USA and Can-
ada.
The satellite radio program is available for
a monthly fee. Details are available from
the SIRIUS XM Service Center and at
http://www.sirius.com (USA) or
http://www.siriuscanada.com (Can-
ada). Registering SatRadio
X Switch on SatRadio mode (Y page 65).
The SatRadio basic menu appears showing
the weather channel. You cannot select any
other stations.
X Select Sat
Sat in the menu bar and press 0098to
confirm.
X Select Service
Service and press 0098to confirm.
The service information screen appears. Service information screen
0043
Telephone number of the satellite radio
provider (SIRIUS XM Radio)
0044 Your satellite radio's SIRIUS XM ID
X Call the phone number of your satellite
radio provider shown on the screen.
i You can also have the satellite service
activated online. To do so, visit the SIRIUS
XM Radio website at
http://www.sirius.com (USA) or
http://www.siriuscanada.com (Can-
ada). Once the connection has been established:
X Follow the instructions of the service staff.
The activation process may take up to ten
minutes. If the activation is successful, the
Updating
Updating Channels... Channels... message appears
in the display, followed by the SatRadio
basic menu.
i If registration is not included when pur-
chasing the system, your credit card details
will be required to activate your account.
If the satellite radio is not installed or is not
installed correctly, the Device Unavail‐ Device Unavail‐
able
able message will appear. Switching on satellite radio mode
Notes You can also use the multifunction steering
wheel to tune in channels or scroll through
lists, e.g. by pressing the
00590065
00630064 buttons (Y page 18).
For important notes on registration, see "Reg-
istering satellite radio" (Y page 65).
X Press 00E2.
The No Service No Service message appears when
starting up or if no signal is being received.
Once Audio 20 receives the signal, the
SatRadio basic menu appears. The station
last selected is played.
i Repeatedly pressing this button switches
between the FM, AM and WB wavebands in
that order and then switches to satellite
radio mode. Pressing the button again
takes you back to FM radio mode.
If the satellite radio is not installed or is not
installed correctly, the Device Unavail‐ Device Unavail‐
able
able message will appear.
Once Audio 20 receives the signal, the SatRa-
dio basic menu appears. The station last
selected is played. Satellite radio
65Audio