2014 MAZDA MODEL 6 ignition

3
ACCELERATED WAR M-UP SYSTEM (AWS)
Vehicle Starting:
Your vehicle is equipped with SKYACTIV combustion technology. This
technology includes AWS (Accelerated Warm-up System) for optimal
emission performance during cold starting conditions.
Cold Start (e.g., First start of the day on cold mornings):
Depress the brake (Automatic Trans.) or clutch (Manual Trans.), when the key
indicator light turns green
(if equipped) push the START/STOP button.
What you will notice: On start-up, the engine speed and sound are
higher (1500 RPM) for 30 seconds to 1 minute to quickly bring the catalyst
to effcient operating temperature. The RPM will reduce to idle once the
temperature is achieved. This is normal engine operation under cold
start conditions.
NOT E:
Yo u can drive the vehicle during AWS activation, no need to wait.
Normal Start (Emission components within optimal
temperature range):
Depress the brake (Automatic Trans.) or clutch (Manual Trans.), when the
key indicator light turns green push the START/STOP button.
Key
STARTING THE ENGINE
While Carrying the Key…
• Start the engine by pushing the START/STOP button, while
pushing the clutch pedal (manual transmission) or the brake pedal
(automatic transmission).
• Shut the engine OFF by placing the vehicle in Park, then push the
S TA R T/ S TO P b u t t o n .
• Activate Accessories (ACC) by pushing the START/STOP button
once without pushing the clutch or brake pedal.
• To turn the ignition to the ON position, push the START/STOP
button twice without pushing the clutch or brake pedal.
The key indicator light
in the instrument cluster will show GREEN
(en gine ready to start) when the key is detected and the clutch pedal (M/ T)
or the brake pedal (A / T) is pushed. If the KEY warning light illuminates
RE D, or the START/STOP button indicator light fashes AMBER , th is
could indicate a problem with the engine starting system and the inability
to start the engine or switch the ignition to ACC or ON. Have your vehicle
inspected at an Authorized Mazda Dealer as soon as possible.
NOT E:
RED Key Indicator Light may fash if the key is placed in the cup holder.
The key may not be detected in the cup holder .

5
Folding Rear Seatbacks Down
Returning rear seats to
upright position
1 Raise seatbacks until they lock into position.
2 Pul l on the top of the seatbacks from inside
the vehicle to make sure they are locked.
3 Che ck that all seat belts are routed properly for passenger use.
MEMORY SE AT SWI TCH (if eq uipped)
Seats
To Program the Driv er’s Seat Memory Position
1 Turn the ignition switch off.
2 Adjust seat to desired position using the slide/tilt and recline switches.
3 Push and hold the memory seat SET button until a beep is heard.
4 Within 5 seconds:
• To p rogram a memory seat button, push and hold memory button
1 or 2 until a beep sound is heard.
• To program a key, push and hold the key unlock button until a beep
sound is heard (two registered keys can be programmed).
NOTE: Left rear seat release is shown .
Using remote handle:
1 Che ck that rear seats are clear
of objects.
2 Ope n the trunk and pull the
left and/or right side remote
handle lever(s).
3 Ope n a rear door and fold the
rear seat forward.

11
Lights
LIGHTING CONTROL/TURN SIGNAL LEVER
: Turns tail, parking, dashboard,
an d headlights on.
: Turns tail,
pa rking, and
dashboard
lights on.
Pull
to Flash
High Beams Pu
sh for
High Beams
NOTE: The DRL (Daytime Running Lights) automatically turn on when the ignition is
switched ON. To disable/enable this feature see your Authorized Mazda Dealer.
AUTO: The light sensor
automatically determines
when to turn the headlights
on or off.: Turns fog lights
on on ly when
headlights
are on.
Smart Turn: To signal a lane
change, push the turn signal lever
up or down halfway and release.
After releasing the lever, the turn
signal indicator will fash three times.
(Refer to page 6 or Owner’s Manual
for “Personalization Features”)

12
Wiperswww.MazdaUSA.com
WINDSHIEL D WIPER /WASHER CONTROL LEVER
AUTO: The rain sensor senses the amount of rainfall and turns the wipers
on or off. Rotate inner ring away from you (clockwise) for more sensitivity
(requires less rain to turn wipers on) and toward you (counterclockwise)
for less sensitivity (requires more rain to turn wipers on).
CAUTION: When the ignition is ON, turn the AUTO wipers OFF when
going through a car wash, or while cleaning or touching the windshield.
NOTE: Vehicles not equipped with
AUTO wipers will have INT wipers.
Set the lever to INT and choose an
interval timing by rotating the ring
between fast and slow.
Pull lever
to dispense
windshield
washer fuid
Less sensitive More sensitive
1
2
3HILO
AUTO
OFF
MIST

14
Headlightswww.MazdaUSA.com
Push AFS OFF to turn
system off or on. When off,
AFS OFF illuminates in the
instrument panel.
With AFS
Without AFS
ADAPTIVE FRONT-LIGHTING SYSTEM (AFS) (if equipped)
The adaptive front-lighting system (AFS) automatically turns the
headlight beam to the right or left in conjunction with the direction of
the steering wheel.
The AFS improves the direction of headlight illumination while cornering, and
only works when the vehicle is moving.
NOTE:
• With AFS, it is normal to see the headlights move and hear the sound of the
he adlight leveling motors at the front of the vehicle when the ignition is ON.
•
The system will need to be reset if the vehicle battery has been disconnected
or the system fuse has been replaced. Please refer to your Owner’s Manual for
easy to follow resetting instructions.

18
Tireswww.MazdaUSA.com
TIRE PRESSURE MONI TORING SYSTE M (TP MS)
Your vehicle is equipped with a Tire Pressure Monitoring System (TPMS)
that detects low tire pressure in one or more tires. In the following cases,
the TPMS must be “initialized” so the system can operate normally.
• The tire pressure is adjusted (up or down) in one or more tires.
• A tire ro tation is pe rformed.
• Any ti re or wh eel is re placed.
•
The ve hicle’s ba tter y is di sconnected, re placed or co mpletely de ad.
Initialization Process (TPMS Warning Light is Illuminated):
1 Park the vehicle in a safe place and frmly apply the parking brake.
2 Let t he tires cool, then adjust the tire pressure to the specifed
pressure (S ee ti re la bel lo cated on th e dr i ve r’s si de B- pillar or ed ge
of dr iver’s door frame for specifcation) on all four (4) tires.
3 Swi tch the ignition ON, but leave the vehicle parked.
4 Pus h and hold the TPMS “Set Switch” (left side of dash)
until the TPMS warning light
in the
instrument cluster fashes twice and a
beep sound is heard once.
PERSONALI ZE YOU R MAZD A6
WI TH G ENUINE MAZD A A CCES SORIES
Go to www.MyMazda.com, then select “Accessories” below the MyMazda
Home header for a complete listing of available accessories for your Maz\
da6.
NOTE: See Page 7 for TPMS switch location.
CAUTION: If the TPMS “Set Switch” is pushed without adjusting the tire
pressure, the system cannot detect the normal tire pressure. The TPMS
warning light may not illuminate, even if the tire pressure is low, or it may
illuminate if the tire pressure is normal.

35
Navigation System
TO REMOVE OR INSERT THE MAP SD CA RD:
1 Tu r n the vehicle ignition OFF.
2 Loc ate the sliding door on the lower left side
of the dash (see page 5) and slide it open (right).
• Remove card: Push the card once, then pull it out.
• Ins ert card: Push the card in (label-side up), then slide door closed (left).
NOTE:
•
Visit www.mazdausa.com/navigation within 60 days of vehicle delivery and
download the most recent map available for your device for free. In order to
download or upgrade your map, the TomTom Home software must be downloaded.
Please refer to the Navigation System Owners Manual section of
www.mazdausa.com/navigation for additional information.
• Only use your MAP SD card for operating and updating your navigation system. Do not
insert the MAP SD card into another vehicle or into any other device such as a camera.
• If your vehicle is not equipped with a factory navigation system, your audio system
can be upgraded to include navigation. Contact your Authorized Mazda Dealer for
more details.
Navigation System
SD Card
PLANNING A ROUTE USING THE TOUCH-SCREEN
IMPO R TA N T : In the interest of safety and to reduce distractions while you
are driving, you should always plan a route before you start driving.
To plan a route on your Navigation system, do the following:
1 Pus h the NAV button to access the Navigation System.
2 Ta p the screen (above) to open the MAI N M ENU (below).
NOT E:
Fact ory Navigation System is
ava ilable if the vehicle is equipped with
the 5.8” LCD screen. Contact your
Aut horized Mazda Dealer for more details.
3 To u c h Navigate to .
4 To u ch Address .