2014 MAZDA MODEL 3 HATCHBACK coolant temperature

7–19
If Trouble Arises
Overheating
Overheating
If the High engine coolant temperature
warning light illuminates, the vehicle loses
power, or you hear a loud knocking or
pinging noise, the engine is probably too
hot.
WARNING
Switch the ignition to off and make
sure the fan is not running before
attempting to work near the cooling
fan:
Working near the cooling fan when it
is running is dangerous. The fan could
continue running indefi nitely even if
the engine has stopped and the engine
compartment temperature is high. You
could be hit by the fan and seriously
injured.

Do not remove either cooling
system cap when the engine and
radiator are hot:
When the engine and radiator are hot,
scalding coolant and steam may shoot
out under pressure and cause serious
injury.

Open the hood ONLY after steam is no
longer escaping from the engine:
Steam from an overheated engine is
dangerous. The escaping steam could
seriously burn you.
If the High engine coolant temperature
warning light illuminates:
1. Drive safely to the side of the road and
park off the right-of-way.
2. Put a vehicle with an automatic
transaxle in park (P), a manual
transaxle in neutral.
3. Apply the parking brake.
4. Turn off the air conditioner.
5. Check whether coolant or steam is
escaping from the engine compartment.
If steam is coming from the engine
compartment:
Do not go near the front of the vehicle.
Stop the engine.
Wait until the steam dissipates, then
open the hood and start the engine.
If neither coolant nor steam is escaping:
Open the hood and idle the engine until
it cools.
CAUTION
If the cooling fan does not operate
while the engine is running, the engine
temperature will increase. Stop the
engine and call an Authorized Mazda
Dealer.
6. Make sure the cooling fan is operating,
then turn off the engine after the
temperature has decreased.
7. When cool, check the coolant level.
If it is low, look for coolant leaks from
the radiator and hoses.
/C\FCA&('#*A'FKVKQPKPFD

7–26
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
Signal Warning
(Red)
High Engine Coolant
Temperature Warning
Light The light fl ashes when the engine coolant temperature is extremely high, and
illuminates when the engine coolant temperature increases further.
Handling Procedure
Flashing light
Drive slowly to reduce engine load until you can fi nd a safe place to stop the vehicle
and wait for the engine to cool down.
Illuminated light
This indicates the possibility of overheating. Park the vehicle in a safe place
immediately and stop the engine.
Refer to Overheating 7-19 .
CAUTION
Do not drive the vehicle with the high engine coolant temperature warning light
illuminated. Otherwise, it could result in damage to the engine.
Power Steering
Malfunction Indicator
Light The light illuminates/fl ashes if the electric power steering has a malfunction.
If the light illuminates/fl ashes, stop the vehicle in a safe place and do not operate the
steering wheel. There is no problem if the light turns off after a while. Contact an
Authorized Mazda Dealer if the light illuminates/fl ashes continuously.
NOTE
yIf the indicator light illuminates/fl ashes, the power steering will not operate normally.
If this happens, the steering wheel can still be operated, however, the operation may
feel heavy compared to normal, or the steering wheel could vibrate when turning.
y Repeatedly jerking the steering wheel left and right while the vehicle is stopped or
moving extremely slowly will cause the power steering system to go into protective
mode which will make the steering feel heavy, but this does not indicate a problem. If
this occurs, park the vehicle safely and wait several minutes for the system to return
to normal.
/C\FCA&('#*A'FKVKQPKPFD

*Some models.7–34
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
Message Indicated on Display *
If a message is displayed in the type B audio display, take appropriate action (in a calm
manner) according to the displayed message.
(Display example)
Stop Vehicle in Safe Place Immediately
If the following messages are displayed in the Type B audio display, a vehicle system may
be malfunctioning. Stop the vehicle in a safe place and contact an Authorized Mazda Dealer.
Display Indicated Condition
Displays if the engine coolant temperature has increased
excessively.
Displays if the charging system has a malfunction.
/C\FCA&('#*A'FKVKQPKPFD

10–4
Index
F
Flasher
Hazard warning ............................. 4-58
Headlights ..................................... 4-41
Flat Tire ................................................. 7-3
Mounting the Spare Tire................ 7-11
Removing a Flat Tire ....................... 7-7
Floor Mat ............................................ 3-46
Fluid
Brake/Clutch ................................. 6-31
Washer ........................................... 6-31
Fluids
Classifi cation ................................... 9-4
Fog Lights ........................................... 4-51
Foot Brake ........................................... 4-68
Forward Obstruction Warning
(FOW) ............................................... 4-116
Collision Warning ....................... 4-118
Rader Sensor ............................... 4-118
Forward Sensing Camera .................... 4-63
Front Seat .............................................. 2-5
Fuel
Filler lid and cap............................ 3-30
Gauge ............................................ 4-15
Requirements................................. 3-27
Tank capacity .................................. 9-5
Fuel Consumption Display ................. 4-86
Fuel Economy Monitor ....................... 4-86
Control status display .................... 4-87
Ending screen display ................... 4-87
Fuel consumption display ............. 4-86
G
Gauges ................................................. 4-12
Glove Compartment .......................... 5-139
H
Hazard Warning Flasher ...................... 4-58
Hazardous Driving .............................. 3-46
Head Restraint ..................................... 2-10 Headlights
Control........................................... 4-41
Flashing ......................................... 4-45
High-low beam .............................. 4-45
Leveling......................................... 4-45
High Beam Control System (HBC) .... 4-48
Hill Launch Assist (HLA) ................... 4-70
HomeLink Wireless Control System ... 4-59
Hood Release ...................................... 6-24
Horn .................................................... 4-58
I
i-ELOOP ............................................. 4-83
Control status display .................... 4-85
Display .......................................... 4-83
i-ELOOP indicator light ................ 4-85
i-ELOOP warning beep ....................... 7-38
If a Warning Light Turns On or
Flashes................................................. 7-24
If the Active Driving Display (ADD)
does not operate .................................. 7-42
Ignition
Switch .............................................. 4-4
Ignition not switched off (STOP)
warning beep ....................................... 7-37
Immobilizer System ............................ 3-41
Indicator Lights ................................... 4-24
AFS OFF ....................................... 4-46
BSM OFF .................................... 4-114
Low engine coolant temperature ... 4-26
Wrench .......................................... 4-26
Inside Trunk Release Lever ................ 3-25
Inspecting Brake/Clutch Fluid Level .. 6-31
Inspecting Coolant Level .................... 6-29
Inspecting Engine Oil Level ............... 6-28
Inspecting Washer Fluid Level............ 6-31
/C\FCA&('#*A'FKVKQPKPFD