2014 LINCOLN NAVIGATOR ECO mode

6 7*if equipped
2014 NAVIGATOR
Overdrive Control with Tow/Haul Feature

The tow/haul feature improves transmission operation when towing a trailer or a heav y load. To
activate tow/haul, press the button on the side of the gearshif t lever. The TOW HAUL indicator light
will illuminate in the instrument cluster. To deactivate, press the button again. Drive with the vehicle
in D (Overdrive) with tow/haul off for the best fuel economy. Refer to the Transmission chapter of
your Owner’s Manual for more information.
Control Trac® Four-Wheel-Drive (4WD) System *
4X2 (2WD):
Delivers power to the rear wheels only. This is appropriate for normal, on-road driving
on dr y pavement.
4X4 AUTO: Provides electronic control four-wheel drive with power delivered to all four wheels, as required, for increased traction.
The information display will show “ 4X4 AUTO” when this position is selected. This mode is appropriate for all on-road driving conditions,
such as dr y road sur faces, wet pavement, snow or gravel.
4X4: Provides electronically locked four-wheel drive power to all four wheels. The information display will show “ 4X4” when you select
this mode. 4x4 mode is not recommended for use on dr y pavement. It is only intended for severe winter or off-road conditions, such as
deep snow, ice or shallow sand. Refer to the Using Four-Wheel Drive (4WD) chapter in your Owner’s Manual for more information
including shifting instructions.
AdvanceTrac® with RSC® (Roll Stability ControlTM)
Helps you keep control of your vehicle when on a slipper y sur face. The electronic stabilit y control por tion of the system helps avoid skids
and lateral slides, and roll stabilit y control helps avoid a vehicle rollover. The traction control system helps avoid drive wheel spin and loss
of traction. Refer to the Stability Control chapter in your Owner’s Manual for safety information and more details.
Trailer Sway Control*
This feature applies your vehicle brakes at individual wheels and, if necessar y, reduces engine power. If the trailer begins to sway, the
stabilit y control light flashes. The first thing to do is slow your vehicle down, then pull safely to the side of the road and check for proper
tongue load and trailer load distribution. See the Load Carrying chapter in your Owner's Manual for specific loading information.
Vehicle Stability

Tips
Make sure you accept SYNC’s request
to access your phone.
To pair subsequent phones or to learn
more about your SYNC system, please
refer to Pairing Subsequent Phones in the
SYNC chapter of your Owner’s Manual .
Using My Phone with SYNC
Note: You must download your phone book
to make phone calls with voice commands
by name.
Making a Phone Call
Use SYNC to make a phone call to anyone
in your phone book by pressing the voice
button and when prompted, give a
voice command.
For example, you could say “ Call Jake Smith
at home ”. When the system confirms the
number, say “ Dial” again to initiate the call.
Note: You can also make phone calls
by pressing the voice button
. When
prompted, give the voice command “ Dial”,
then verbally say the phone number. Answering Incoming Calls
Whenever you have an incoming call, you
will be able to see the name and number of
the person calling in your display. Press the
phone button
to answer an incoming
call. You can hang up at any time by
pressing and holding the phone button
.
Do Not Disturb Mode
This feature blocks incoming calls and tex t
messages, and saves them for later. You
still have access to outgoing calls when this
feature is active. Say the voice command
“ Do not disturb on ” to enable and “Do not
disturb off ” to disable.
Using SYNC to Access Digital Media
SYNC has a media hub with multiple inputs
allowing you to access personal media from
your digital devices. Plug in your USB media
devices such as phones and MP3 players,
and use SYNC to play all of your favorite
music. SYNC indexes all of your music. The
more music that is stored on your device,
the longer it takes SYNC to index.Using Voice Commands to Play Music
1. Plug your media player into your
USB port.
2. Press the voice button
. When
prompted, say “ USB”, then follow-up
saying one of the following
voice commands.
SYNC AppLinkTM*
SYNC AppLink allows voice access to
select mobile applications that you already
have or can download to your Android
TM,
BlackBerry® or iPhone®.
Current apps available include Pandora
Internet Radio®, Stitcher Smar t Radio
TM,
Open Beak (BlackBerry exclusive),
IHear tRadio, Slacker, NPR News and
SYNC Destinations and more.
For more information on SYNC, visit the
website or call the toll-free number. See the
inside front cover of this guide for details.
SYNC®
Getting Started with Your SYNC System
SYNC is a hands-free, voice recognition system used
for entertainment, information and communication.
SYNC. Say the Word.
General Tips
Press RETURN to exit a menu.
For additional suppor t, refer to your Owner’s Manual , visit the
website or call the toll-free number. See the inside front cover
of this guide for details.
Before You Get Started 1. Set up your owner account by visiting SyncMyRide.com (U.S.)
or SyncMyRide.ca (Canada). Follow the on-screen instructions.
Note: Your account gives you even more SYNC capabilities,
including personalization features and software updates.
2. SYNC uses a wireless connection called
Bluetooth® to
communicate with your phone. Turn Bluetooth mode on in
your phone's menu options. This lets your phone find SYNC.
For more details on setting up your phone with SYNC, visit
SyncMyRide.com (U.S.), SyncMyRide.ca (Canada) or your
phone manufacturer’s website.
8 9
*if equipped
2014 NAVIGATOR
Pairing Your Phone with SYNC
Pair your phone to use many
of the features of SYNC.
To Pair Your Phone for the
First Time 1. Make sure that your vehicle
is in P (Park) and both
your ignition and radio
are turned on.
2. Press the phone button
on your steering
wheel or the Phone button
on your audio controls.
When the No phone paired
message comes up on the
screen, press Settings ,
then press Add to add your
cellular phone.
3. Make sure that Bluetooth
is set to on and your cellular
phone is in the proper
mode. Refer to your phone’s
user guide, if necessar y.
4. Find SYNC will appear on
the touchscreen, indicating that it is tr ying to pair with
your cellular phone. When
it finds your phone, a
six-digit PIN
will appear
on your touchscreen.
5. When prompted on your cellular phone’s display,
enter the six-digit PIN
provided by SYNC into
your cellular phone.
6. The display indicates when
the pairing is successful.
Note: The system may prompt
you to:
Set your phone as the
primary/favorite (the primar y
phone will receive messages
and voicemail).
Download your phone
book (this is required
to use the full set of
voice commands).
Turn on 911 Assist®.