2014 LINCOLN MKS lock

Tips Save your favorite
locations by touching
“Save to Favorites”.
Change your map views
from Direction Headed,
North Up or 3D.
Climate
Control the temperature,
airflow direction, fan speed and
other climate features for you
and your front passenger. Say
“Climate temperature 72
degrees” and MyLincoln Touch
will make the adjustment.
Set Your Temperature Touch the lower-right,
blue Climate corner on
the touchscreen.
Set your exact, desired
temperature by using
the (+) or (-) buttons.
Entertainment
No matter how you store
your music, SYNC makes it yours
to enjoy when you’re behind the
wheel. Just press the lower-left,
red corner of the touchscreen.
From here, you can easily go
between AM/FM, Sirius and other
media sources.
Set Your Radio Presets Touch the Entertainment
corner on the touchscreen.
Touch FM.
Touch Direct Tune.
Enter the desired station and
touch Enter.
Touch Presets and then touch
and hold one of the memory
preset buttons to save it.
You'll hear a brief mute and
the sound will return once the
station is saved.
Using SYNC to Access
Digital Media
SYNC has a media hub with
multiple inputs, allowing you to
access personal media from your
digital devices. Plug in your USB
media devices, such as phones
and MP3 players, and use SYNC
to play all of your favorite music.
Note: SYNC indexes your music;
the more information that is
stored on your USB device, the
longer it takes SYNC to index.
Using Voice Commands
to Play Music
1. Plug your media player into
your USB port.
2. Press the voice button. When
prompted say “USB”, then
follow up by saying one of the
following voice commands:
Play all
Play next song
Play song
Play album
For more information, refer to
the MyLincoln Touch chapter
of your Owner’s Manual. For
support, visit the website or call
the toll-free number. See the
inside front cover of this guide
for details.
SYNC® with MyLincoln TouchTM
8 9
2014 MKS
Using My Phone with SYNC
Note: Enter your phone book
contacts with both first and last
names to increase SYNC’s ability
to select the correct contact.
Remember to say the contact
name exactly as it’s listed in
your phone book.
Making a Phone Call
Use SYNC to make a phone call
to anyone in your phone book
by pressing the voice button.
When prompted, give any of
the following voice commands:
Call
Call at work
Call on mobile
or cell
Call at home
For example, you could say
“Call Jake Smith at home”. SYNC
repeats the command back to
you and dials the number. Note:
You can also make
phone calls by giving the voice
command “Dial”, then verbally
saying the phone number.
Answering Incoming Calls Whenever you have an incoming
call, you will be able to see the
name and number of the person
calling in your display. Press
ACCEPT on the touchscreen or
the phone button to answer an
incoming call.
Ending the Call
Press and hold the phone button.
Do Not Disturb Mode
This feature blocks incoming
calls and text messages, and
saves them for later. You still have
access to outgoing calls when this
feature is active. Say the voice
command
“Do not disturb on” to
enable and “Do not disturb off”
to disable.
Navigation*
Get started with your
navigation system by pressing
the upper-right, green corner.
The available, voice activated
navigation system includes:
SiriusXM Traffic
SiriusXM Travel Link
GPS (Global Positioning
System) technology
3-D mapping
Turn-by-turn navigation
Set a Destination
Set a destination on your
touchscreen by using a street
address, city center, a place on
the map or a Point of Interest
(POI). The easiest way, however,
is by voice.
1. Press the voice
button.
When prompted say
“Destination street address”. 2.
The system will ask you
to say the full address and
will display an example
on-screen.
3. You can then speak
the address naturally,
such as: “One two three
Main Street, Anytown”.
You can also use the
touchscreen to enter a
destination and narrow your
choices by city or street as
you type.
You can choose from up to
three different types of routes:
Fastest: Uses the fastest
moving roads possible.
Shortest: Uses the shortest
distance possible.
Eco (EcoRoute): Uses the
most fuel efficient route.
*if equipped

Heated and Cooled Front Seats
To use, press the heated seat
symbol or the cooled seat
symbol located on the
touchscreen to cycle through
the various settings and off.
Warmer or cooler settings are
indicated by more indicator
lights. The heated and cooled
seats will only function when
the engine is running.
Heated Steering Wheel*
Your vehicle may be equipped
with a heated steering wheel.
Press the
icon in your
touchscreen to turn this feature
on and off.
Note: The wood trim will not
heat between the 10 and 2
o’clock positions.
Rear Heated Seats*
The rear heated seat controls
are located on the rear of the
center console. To use, press the
heated seat button
to cycle
through the various heat settings
and off. Warmer settings are
indicated by more indicator lights.
The rear heated seats will only
function when the ignition is on.
Memory Function
The memory control, located
on the driver's door, allows the
positioning recall of the driver's
seat, power mirrors, power tilt
and telescopic steering column*
and adjustable pedals*. To
program position 1, press and
hold the 1 button until you hear
a tone. Use this same procedure
to set positions 2 and 3 using
the respective buttons. You can
recall the set memory positions
by pressing the desired
memory control.

Tilting Head Restraints
Your vehicle’s front-row head
restraints can be adjusted. Pull
up to raise the head restraint. To
lower, press the head restraint
down while pressing and holding
the guide sleeve adjust/release
button. Tilt the head restraint
forward for additional comfort
by gently pulling the top of the
head restraint. Once it is in the
forward-most position, tilting it
forward once more will release it
to the upright position.
Note:
Do not attempt to force the
head restraint backward after it
is tilted. Instead, continue tilting
it forward until the head restraint
releases to the upright position.
Dual-panel Moonroof
and Power Sunscreen*
Your moonroof and sunscreen
have a one-touch, open and
close feature.
To open the sunscreen, press
and release. To close, pull
and release .
To open the moonroof, press
and release the SLIDE control.
The sunscreen will open
automatically. To close, pull and
release the SLIDE control.
To vent the moonroof, press
and release the TILT control.
To close, pull and release the
TILT control.
To stop motion at any time, press
the control a second time.
Convenience
Intelligent Access Key Functions
Note: Your intelligent access key must be within 3 feet (1 meter)
of the vehicle for intelligent access to function properly.
To unlock and open the driver’s door, pull the front exterior door
handle. To lock the doors, press and hold the sensor button on the
door handle.
The intelligent access key also contains a mechanical key blade,
which can be used to unlock the driver door if necessary.
Press
once to lock all doors. Press again within three seconds to
confirm all doors are locked. You can also use the remote to close the
vehicle’s windows and vent the moonroof * by pressing and holding
the lock button on the remote control. Press the lock or unlock button
to stop the motion.
Press
once to unlock the driver’s door. Press again within three
seconds to unlock all doors. You can also use the remote control to
open the vehicle’s windows and vent the moonroof * by pressing and
holding the unlock button. The power sunscreen will also open.
Press
to activate the panic alarm. Press again or turn on the
ignition to deactivate.
Press
twice within three seconds to open the trunk.
Car finder: Press
twice within three seconds to locate your vehicle.
The horn will sound and the lamps will flash.
Remote Start Remote start allows you to start the
engine from outside your vehicle
using your transmitter. To start,
press
and then press twice
within three seconds. Once inside,
apply the brake while pressing the
ENGINE START/STOP button. Shift
into D (Drive) and go. To turn the engine off from outside the vehicle
after using your remote start, press
once.
Exterior Trunk Release
Open your trunk from outside of your vehicle:
1. Unlock the trunk with the remote control or power door lock control.
2. Press the release button located near the license plate.
MyKey®
MyKey allows you to program certain driving restrictions in order to
promote good driving habits. You can program things such as speed
restrictions and limited volume levels. For complete information, refer \
to the MyKey chapter in your Owner’s Manual.
10 11
*if equipped
2014 MKSComfort
*if equipped

Active Park Assist*
Detects an available parallel
parking space and automatically
steers the vehicle into the space
(hands-free) while you control the
accelerator, gearshift and brakes.
The system visually and audibly
instructs you to park your vehicle.
To use active park assist, press
the AUTO IPI button located near
the shifter. Use the turn signal to
indicate which side of the vehicle
you want the system to search
on. If the turn signal is not on, the
system automatically searches
on the vehicle’s passenger side.
To stop the parking procedure,
grab the steering wheel or press
the control again. For complete
information, refer to the
Parking Aids chapter of
your Owner’s Manual.
Note: The driver is always
responsible for controlling the
vehicle, supervising the system
and intervening, if required.SecuriCode™ Keyless
Entry System
Allows you to lock or unlock the
doors, recall memory features
and arm or disarm the anti-theft
alarm. To get started, you will
need your five digit factory code
found on your owner’s wallet
card (located in the glove box).
Entering this code unlocks
the driver’s door. To lock all
doors, press and hold 7•8
and 9•0 at the same time. For
complete information, refer to
the SecuriCode Keyless Entry
Keypad section in the Locks
chapter of your Owner’s Manual.
Function
BLIS® (Blind Spot Information System) with
Cross Traffic Alert (CTA)*
BLIS uses radar sensors to help you determine if a vehicle may
be in your blind spot zone. The CTA feature warns you of vehicles
approaching from the sides when the transmission is in R (Reverse).
BLIS and CTA will display a yellow indicator light in your exterior
mirrors and the CTA will also sound tones and display messages
to warn you which direction vehicles are approaching. Refer to the
Driving Aids chapter in your Owner’s Manual for more information.
Note: Visibility aids do not replace the need to watch where
the vehicle is moving. Refer to your Owner’s Manual for safety
information, more details and system limitations.
Lane Keeping System*
The system detects unintentional drifting toward the outside of
the lane and alerts or aids the driver to stay in the lane through
the steering system and instrument cluster display. The system
automatically detects and tracks the road lane markings using a
camera that is mounted behind the interior rearview mirror.
14 15
*if equipped
2014 MKS
Rear View Camera *
This system provides a video image of the area behind the vehicle. The display
automatically appears in the touchscreen when the vehicle is in R (Reverse) and
uses green, yellow and red guides to aler t you of your proximit y to objects.
Forward and Reverse Sensing Systems This system sounds an audible warning tone if there is an obstacle near \
the
vehicle’s front or rear bumpers. As the vehicle moves closer to the o\
bstacle, the
rate of the warning tone increases in frequency. The front sensors are a\
utomatically
activated when the gearshift is in any position other than P (Park) or N (Neutral)
and the vehicle speed is below 7 mph (12 km/h). The system detects cer\
tain objects
while the transmission is in R (Reverse) and will detect objects up to 6 feet
(2 meters) away. See the Parking Aids chapter in your Owner’s Manual for
complete information on your vehicle’s sensing systems.
SelectShift Automatic® Transmission
Your SelectShift automatic transmission gives you the ability to manuall\
y change
gears, if you like. To use SelectShift, move the gearshift lever into S (Sport). Use
the paddle shifters, located on the steering wheel, to manually select g\
ears.
Pull (+) to upshift, pull (-) to downshift. Return the gearshift lever to D (Drive)
when manual control is no longer desired.
Lincoln Drive Control
This suite of electronic vehicle systems continuously monitors both your\
inputs and the road conditions
to optimize ride comfort, steering, handling, powertrain response and so\
und. Choose your custom driving
experience through the information display under Settings, Drive Assist and then Drive Control:
Comfort: provides drivers with easier steering and a more fluid suspension.
Normal: delivers a more engaging drive experience with confident handling and a\
powerful,
yet quiet powertrain sound.
Sport: adds a sporty feel with a stiffer suspension and an emphasis on handlin\
g and control,
along with a more powerful engine tone.*if equipped