2014 LEXUS RX270 turn signal

1
2
3
4
5
6
RX350/270_EE
3
2-1. Driving procedures
Driving the vehicle ........................ 168
Engine (ignition) switch .............. 180
Automatic transmission.............. 186
Turn signal lever ............................ 193
Parking brake ................................. 194
Horn.................................................... 195
2-2. Instrument cluster
Gauges and meters ..................... 196
Indicators and warning
lights................................................. 198
Multi-information display.......... 203
Head-up display ............................ 212
2-3. Operating the lights and
windshield wipers
Headlight switch ............................. 217
Fog light switch ............................. 222
Windshield wipers and
washer............................................ 223
Rear window wiper and
washer............................................ 227
Headlight cleaner switch .......... 2292-4. Using other driving systems
Cruise control ............................... 230
Dynamic radar cruise
control............................................ 234
Lexus parking
assist-sensor................................ 248
Electronically modulated
air suspension ............................. 256
Rear view monitor system ........ 263
Driving assist systems................... 271
All-wheel drive lock switch ...... 277
Hill-start assist control ............... 278
Pre-Crash Safety system ......... 280
2-5. Driving information
Utility vehicle precautions ........ 289
Cargo and luggage ..................... 293
Winter driving tips ....................... 296
Trailer towing (RX350)........... 300
Trailer towing (RX270) ............... 311
2When driving
RX350_270_EE_48D77E.book 3 ページ ２０１４年１月２４日　金曜日　午前１０時４分

RX350/270_EE
8
Pictorial indexExterior
Headlights P. 217
Front fog lights P. 222
Turn signal lights P. 193
Windshield wipers P. 223
Moon roof ∗
Electronic sunshade
∗
P. 104
P. 108
Outside rear view mirrors
P. 98Hood P. 465
Daytime running lights/
Front position lights
P. 217
Windshield wiper
de-icer
∗, * P. 322
RX350_270_EE_48D77E.book 8 ページ ２０１４年１月２４日　金曜日　午前１０時４分

RX350/270_EE
9
∗: If equipped
*: For vehicles with a navigation system, refer to the “Navigation System Owner’s Manual”.
Tires
●Rotation
●Replacement
●Inflation pressure
P. 483
P. 572
P. 617
Tail lights P. 217
Rear turn signal lights P. 193
Back door opener
button
P. 60
Rear window wiper P. 227
Rear fog lights P. 222
Side doors P. 56Back door P. 60
Fuel filler door P. 110
Rear window defogger* P. 321
RX350_270_EE_48D77E.book 9 ページ ２０１４年１月２４日　金曜日　午前１０時４分

RX350/270_EE
14
Pictorial indexInstrument panel
Headlight switch
Turn signal lever
Fog light switch P. 217
P. 193
P. 222
Windshield wipers and washer switch
Rear window wiper and washer switch P. 223
P. 227
Power back door main
switch
∗ P. 62
Tilt and telescopic steering control switch P. 94
Parking brake pedal P. 194
Hood lock release
lever
P. 465
Gauges and meters
Multi-information display P. 196
P. 203
Glove box P. 421
Horn P. 195
Engine (ignition) switch P. 180
RX350_270_EE_48D77E.book 14 ページ ２０１４年１月２４日　金曜日　午前１０時４分

81
1
1-3. Adjustable components (seats, mirrors, steering wheel)
Before driving
RX350/270_EE
Driving position memory∗
Your preferred driving position (the position of the driver's seat, steering
wheel and outside rear view mirrors) can be memorized and recalled with
the touch of a button. It is also possible to set this function to activate auto-
matically when the doors are unlocked.
Three different driving positions can be entered into memory.
On some models, the same buttons are found on the front passenger’s side,
allowing the position of the front passenger’s seat to be memorized.
■Entering a position to memory
Turn the “ENGINE START STOP” switch to IGNITION ON
mode.
Adjust the driver’s seat, steering wheel and outside rear view
mirrors to the desired positions.
Press the “SET” button, then
within 3 seconds press button
“1”, “2” or “3” until the signal
beeps.
If the selected button has
already been preset, the previ-
ously recorded position will be
overwritten.
STEP1
STEP2
STEP3
∗: If equipped
RX350_270_EE_48D77E.book 81 ページ ２０１４年１月２４日　金曜日　午前１０時４分

82
1-3. Adjustable components (seats, mirrors, steering wheel)
RX350/270_EE
■Recalling the memorized position
Check that the shift lever is set in P.
Turn the “ENGINE START STOP” switch to IGNITION ON
mode.
Press button “1”, “2” or “3” until
the signal beeps to recall the
desired position.
STEP1
STEP2
STEP3
RX350_270_EE_48D77E.book 82 ページ ２０１４年１月２４日　金曜日　午前１０時４分

83
1-3. Adjustable components (seats, mirrors, steering wheel)
1
Before driving
RX350/270_EE
Linking driving position memory with door unlock operation (driver’s side only)
Record your driving position to button “1”, “2” or “3” before performing
the following.
Carry only the key (including the card key) to which you want to link the
driving position. If 2 or more keys are in the vehicle, the driving position
cannot be linked properly.
Shift the shift lever to P and close the driver's door. Turn the
“ENGINE START STOP” switch to IGNITION ON mode.
Press the desired button (“1”, “2” or
“3”) to recall the position. Then,
while keep pressing the button,
press the driver's door lock
switches (either lock or unlock)
until the signal beeps.
The driving position is recalled
when the driver's door is unlocked
using the entry function or wireless
remote control and the driver's
door is opened.
STEP1
STEP2
RX350_270_EE_48D77E.book 83 ページ ２０１４年１月２４日　金曜日　午前１０時４分

85
1-3. Adjustable components (seats, mirrors, steering wheel)
1
Before driving
RX350/270_EE
■When driving position memory is linked with door unlock operation
If the driver’s door is opened, the driver’s seat will move toward the memorized
position but stop slightly beforehand to allow easy access to the vehicle.
Turning the “ENGINE START STOP” switch to ACCESSORY mode or fastening
the driver’s seat belt moves the seat fully into the memorized position.
■Canceling the linked door unlock operation
Turn the “ENGINE START STOP” switch to IGNITION ON mode and
close the driver's door.
While pressing the “SET” button, press the driver’s door lock switches
(either lock or unlock) until the signal beeps.
■Operating the driving position memory after turning the “ENGINE START
STOP” switch off
Memorized positions (except for the steering wheel position) can be activated up
to 180 seconds after the driver’s door is opened and another 60 seconds after it is
closed again, even after turning the “ENGINE START STOP” switch off.
■Stopping seat position operation part-way through
Perform any of the following operations:
●Press the “SET” button.
●Press button “1”, “2” or “3”.
●Adjust the seat using the switches (only cancels seat position recall).
●Adjust the steering wheel using the tilt and telescopic steering control switch
(only cancels steering wheel position recall).
■Correct seat position
When the seat is in the most forward or most backward position, and the seat is
being moved in those directions, the system may not correctly recognize the cur-
rent position and the memorized position will not be correctly recalled.
■The auto away function for exiting the driver seat
If the seat is already close to the rearmost position, the auto away function may not
operate when the driver exits the vehicle.
■Customization
The distance that the driver’s seat moves backward during the auto away function
can be changed. (Customizable features →P. 6 2 2 )
STEP1
STEP2
RX350_270_EE_48D77E.book 85 ページ ２０１４年１月２４日　金曜日　午前１０時４分