
463
4-3. Do-it-yourself maintenance
4
Maintenance and care
RX350/270_EE
CAUTION
The engine compartment contains many mechanisms and fluids that may move sud-
denly, become hot, or become electrically energized. To avoid death or serious injury,
observe the following precaution:
■When working on the engine compartment
●Keep hands, clothing and tools away from the moving fans and engine drive belt.
●Be careful not to touch the engine, radiator, exhaust manifold, etc. right after driv-
ing as they may be hot. Oil and other fluids may also be hot.
●Do not leave anything that may burn easily, such as paper and rags, in the engine
compartment.
●Do not smoke, cause sparks or expose an open flame to fuel or the battery. Fuel
and battery fumes are flammable.
●Be extremely cautious when working on the battery. It contains poisonous and
corrosive sulfuric acid.
●Take care because brake fluid can harm your hands or eyes and damage painted
surfaces.
If fluid gets on your hands or in your eyes, flush the affected area with clean water
immediately.
If you still experience discomfort, consult a doctor.
■When working near the electric cooling fans or radiator grille
Be sure the “ENGINE START STOP” switch is off.
With the “ENGINE START STOP” switch in IGNITION ON mode, the electric
cooling fans may automatically start to run if the air conditioning is on and/or the
coolant temperature is high. (→P. 4 7 8 )
■Safety glasses
Wear safety glasses to prevent flying or falling material, fluid spray, etc. from getting
in your eyes
RX350_270_EE_48D77E.book 463 ページ 2014年1月24日 金曜日 午前10時4分

485
4-3. Do-it-yourself maintenance
4
Maintenance and care
RX350/270_EE
Initializing the tire pressure warning system
■The tire pressure warning system must be initialized in the following
circumstances:
●When rotating the tires
●When the tire inflation pressure is changed such as when changing
travelling speed or load weight
●When changing the tire size
When the tire pressure warning system is initialized, the current tire
inflation pressure is set as the benchmark pressure.
■How to initialize the tire pressure warning system
Park the vehicle in a safe place and turn the “ENGINE START
STOP” switch off.
While the vehicle is moving, initialization is not performed.
Adjust the tire inflation pressure to the specified cold tire inflation
pressure level. (→P. 6 1 7 )
Make sure to adjust the tire pressure to the specified cold tire inflation
pressure level. The tire pressure warning system will operate based on
this pressure level.
Turn the “ENGINE START STOP” switch to IGNITION ON
mode.
STEP1
STEP2
STEP3
RX350_270_EE_48D77E.book 485 ページ 2014年1月24日 金曜日 午前10時4分

488
4-3. Do-it-yourself maintenance
RX350/270_EE
■The initialization operation
●Make sure to carry out initialization after adjusting the tire inflation pressure.
Also, make sure the tires are cold before carrying out initialization or tire infla-
tion pressure adjustment.
●If you have accidentally turned the “ENGINE START STOP” switch off during
initialization, it is not necessary to press the reset switch again as initialization
will restart automatically when the “ENGINE START STOP” switch has been
turned to IGNITION ON mode for the next time.
●If you accidentally press the reset switch when initialization is not necessary,
adjust the tire inflation pressure to the specified level when the tires are cold,
and conduct initialization again.
■Warning performance of the tire pressure warning system
The warning of the tire pressure warning system will change in accordance with
driving conditions. For this reason, the system may give a warning even if the tire
pressure does not reach a low enough level, or if the pressure is higher than the
pressure that was adjusted to when the system was initialized.
■When initialization of the tire pressure warning system has failed
Initialization can be completed in a few minutes. However, in the following cases,
the settings have not been recorded and the system will not operate properly. If
repeated attempts to record tire inflation pressure settings are unsuccessful, have
the vehicle inspected by any authorized Lexus dealer or repairer, or another duly
qualified and equipped professional.
●When operating the tire pressure warning reset switch, the tire pressure warn-
ing light does not blink 3 times.
●After carrying out the initialization procedure, the tire pressure warning light
blinks for 1 minute then stays on after driving for 10 minutes.
RX350_270_EE_48D77E.book 488 ページ 2014年1月24日 金曜日 午前10時4分

538
5-1. Essential information
RX350/270_EESecurely attach a cable or chain to the towing eyelet.
Take care not to damage the vehicle body.
Enter the vehicle being towed and start the engine.
If the engine does not start, turn the “ENGINE START STOP” switch to
IGNITION ON mode.
For models with electronically modulated air suspension: Change
the vehicle height to “N” mode and end the vehicle height opera-
tion. (
→P. 2 5 6 )
Shift the shift lever to N and release the parking brake.
When the shift lever cannot be shifted: →P. 589
■While towing
If the engine is not running, the power assist for the brakes and steering will not
function, making steering and braking more difficult.
■Wheel nut wrench
Wheel nut wrench is installed in the luggage compartment. (→P. 5 7 2 )
STEP5
STEP6
STEP7
STEP8
RX350_270_EE_48D77E.book 538 ページ 2014年1月24日 金曜日 午前10時4分

550
5-2. Steps to take in an emergency
RX350/270_EE
●If tire chains are used
●Vehicles with a full-size spare tire: If the spare tire is in a location subject to poor
radio wave signal reception
●Vehicles with a full-size spare tire: If a large metallic object which can interfere
with signal reception is put in the luggage compartment
■If the tire pressure warning light frequently comes on after blinking for 1 minute
If the tire pressure warning light frequently comes on after blinking for 1 minute
when the “ENGINE START STOP” switch is turned to IGNITION ON mode, have
it checked by any authorized Lexus dealer or repairer, or another duly qualified and
equipped professional.
■Customization
The vehicle speed linked seat belt reminder buzzer can be disabled.
(Customizable features →P. 6 2 2 )
CAUTION
■When the electric power steering system warning light comes on
The steering wheel may become extremely heavy.
If the steering wheel becomes heavier than usual when operating, hold firmly and
operate using more force than usual.
■If the tire pressure warning light comes on
Be sure to observe the following precautions. Failure to do so could cause loss of
vehicle control and result in death or serious injury.
●Stop your vehicle in a safe place as soon as possible. Adjust the tire inflation pres-
sure immediately.
●If the tire pressure warning light comes on even after tire inflation pressure adjust-
ment, it is probable that you have a flat tire. Check the tires. If a tire is flat, change
it with the spare tire and have the flat tire repaired by the nearest authorized
Lexus dealer or repairer, or another duly qualified and equipped professional.
●Avoid abrupt maneuvering and braking. If the vehicle tires deteriorate, you could
lose control of the steering wheel or the brakes.
■If a blowout or sudden air leakage should occur
The tire pressure warning system may not activate immediately.
RX350_270_EE_48D77E.book 550 ページ 2014年1月24日 金曜日 午前10時4分

5
595
5-2. Steps to take in an emergency
When trouble arises
RX350/270_EE
RX350
Connect the jumper cables according to the following procedure:
Connect a positive jumper cable clamp to the positive (+) battery
terminal on your vehicle.
Connect a positive jumper cable clamp to the positive (+) battery
terminal on the second vehicle.
Connect a negative cable clamp to the negative (-) battery terminal
on the second vehicle.
Connect the clamp at the other end of the negative cable to a solid,
stationary, unpainted metallic point away from the battery and any
moving parts, as shown in the illustration.
Start the engine of the second vehicle. Increase the engine
speed slightly and maintain that level for approximately 5 min-
utes to recharge the battery of your vehicle.
Open and close any of the doors with the “ENGINE START
STOP” switch off.
Maintain the engine speed of the second vehicle and start the
engine of your vehicle by turning the “ENGINE START STOP”
switch to IGNITION ON mode.
STEP2
STEP3
STEP4
STEP5
RX350_270_EE_48D77E.book 595 ページ 2014年1月24日 金曜日 午前10時4分

613
6-1. Specifications
6
Vehicle specifications
RX350/270_EE
Cooling system
Ignition system
Capacity
RX270
6.7 L (7.1 qt., 5.9 Imp. qt.)
RX350
9.5 L (10.0 qt., 8.4 Imp. qt.)
Coolant type
Use either of the following:
• “Toyota Super Long Life Coolant”
• A similar high-quality ethylene glycol-based non-
silicate, non-amine, non-nitrite, and non-borate
coolant with long-life hybrid organic acid technol-
ogy
Do not use plain water alone.
Spark plug
Make
GapRX270
DENSO SK16HR11
RX350
DENSO FK20HR11
1.1 mm (0.043 in.)
NOTICE
■Iridium-tipped spark plugs
Use only iridium-tipped spark plugs. Do not adjust the spark plug gap.
RX350_270_EE_48D77E.book 613 ページ 2014年1月24日 金曜日 午前10時4分

640
Alphabetical index
RX350/270_EE
Doors
Back door.................................................60
Door lock..................................31, 53, 56
Door windows ....................................... 101
Double locking system .......................121
Power back door..................................60
Side door .................................................. 56
Side mirrors ............................................. 98
Driver's seat belt reminder light .....546
Driving
Break-in tips ...........................................170
Correct posture ...................................129
Procedures ............................................ 168
Utility vehicle
precautions........................................289
Winter driving tips............................. 296
Driving position memory ....................... 81
Electric power steering ........................271
Electric sunshade................................... 108
Electronic features control ...............203
Electronic key
If the electronic key does not
operate properly ............................. 591
Electronic sunshade ............................. 108
Electronically modulated air
suspension ............................................ 256
Emergency brake signal .................... 272
Emergency flashers
Switch ...................................................... 532Emergency, in case of
If a warning buzzer sounds .......... 543
If a warning light turns on .............. 543
If a warning message is
displayed ............................................ 552
If the back door opener is
inoperative ........................................... 65
If the electronic key does not
operate properly ..............................591
If the engine will not start ............... 587
If the shift lever cannot be
shifted from “P” ...............................589
If the vehicle has a discharged
battery.................................................. 594
If you have a flat tire .........................572
If you lose your keys ........................590
If you think something is
wrong..................................................... 541
If your vehicle becomes stuck ......601
If your vehicle has to be
stopped in an emergency ......... 603
If your vehicle needs to be
towed ................................................... 533
If your vehicle overheats................598
Engine
Accessory mode ................................ 180
Compartment ..................................... 468
Engine switch ....................................... 180
Hood ....................................................... 465
How to start the engine .................. 180
Identification number....................... 607
If the engine will not start ............... 587
Ignition switch ...................................... 180
Overheating ........................................598
E
RX350_270_EE_48D77E.book 640 ページ 2014年1月24日 金曜日 午前10時4分