Page 93 of 652

93
1-3. Adjustable components (seats, mirrors, steering wheel)
1
Before driving
RX350/270_EE
CAUTION
■When children are in the vehicle
Do not allow children to play with the seat belt. If the seat belt becomes twisted
around a child’s neck, it may lead to choking or other serious injuries that could
result in death.
If this occurs and the buckle cannot be unfastened, scissors should be used to cut
the belt.
■Seat belt pretensioners
If the pretensioner has activated, the SRS warning light will come on. In that case,
the seat belt cannot be used again and must be replaced at any authorized Lexus
dealer or repairer, or another duly qualified and equipped professional.
■Adjustable shoulder anchor
Always make sure the shoulder belt is positioned across the center of your shoul-
der. The belt should be kept away from your neck, but not falling off your shoulder.
Failure to do so could reduce the amount of protection in an accident and cause
death or serious injuries in the event of a sudden stop, sudden swerve or accident.
(→P. 9 0 )
■Seat belt damage and wear
●Do not damage the seat belts by allowing the belt, plate, or buckle to be jammed
in the door.
●Inspect the seat belt system periodically. Check for cuts, fraying, and loose parts.
Do not use a damaged seat belt until it is replaced. Damaged seat belts cannot
protect an occupant from death or serious injury.
●Ensure that the belt and tab are locked and the belt is not twisted.
If the seat belt does not function correctly, immediately contact any authorized
Lexus dealer or repairer, or another duly qualified and equipped professional.
●Replace the seat assembly, including the belts, if your vehicle has been involved in
a serious accident, even if there is no obvious damage.
●Do not attempt to install, remove, modify, disassemble or dispose of the seat belts.
Have any necessary repairs carried out by any authorized Lexus dealer or
repairer, or another duly qualified and equipped professional. Inappropriate han-
dling of the pretensioner may prevent it from operating properly, resulting in
death or serious injury.
RX350_270_EE_48D77E.book 93 ページ 2014年1月24日 金曜日 午前10時4分
Page 101 of 652
101
1
Before driving
RX350/270_EE
1-4. Opening and closing the windows and moon roof
Power windows
Window lock switch
Press the switch to lock the pas-
senger window switches.
The indicator will come on.
Use this switch to prevent children
from accidentally opening or clos-
ing a passenger window.
The passenger windows can still be
opened and closed using the
power window switches on the
driver’s side even if the lock switch
is on.
The power windows can be opened and closed using the switches.
Operating the switch moves the windows as follows:
Closing
One-touch closing
*
Opening
One-touch opening
*
*: To stop the window partway,
operate the switch in the oppo-
site direction.
Indicator
RX350_270_EE_48D77E.book 101 ページ 2014年1月24日 金曜日 午前10時4分
Page 103 of 652

103
1-4. Opening and closing the windows and moon roof
1
Before driving
RX350/270_EE
■Door lock linked window operation
●The power windows can be opened and closed using the mechanical key.
(→P. 5 9 1 )
●The power windows can be opened and closed using the wireless remote con-
trol if customized at any authorized Lexus dealer or repairer, or another duly
qualified and equipped professional. (→P. 5 3 )
■Window close suggestion mode
If the “ENGINE START STOP” switch is turned off with the windows open, a sug-
gestion to close all the windows is shown on the multi-information display.
(→P. 2 0 8 )
■When the battery is disconnected
The window lock switch is disabled. If necessary, press the window lock switch after
reconnecting the battery.
■Customization
Settings (e.g. linked door lock operation) can be changed.
(Customizable features →P. 6 2 2 )
CAUTION
■Closing the windows
Observe the following precautions.
Failing to do so may result in death or serious injury.
●Check to make sure that all passengers do not have any part of their body in a
position where it could be caught when a window is being operated.
●Do not allow children to operate the power windows.
Closing a power window on someone can cause death or serious injury.
The driver is responsible for instructing children not to operate the power win-
dows.
■Jam protection function
●Never use any part of your body to intentionally activate the jam protection func-
tion.
●The jam protection function may not work if something gets caught just before
the window fully closes. Also, the jam protection does not operate when the
power window switch is pulled up continually to close the windows.
RX350_270_EE_48D77E.book 103 ページ 2014年1月24日 金曜日 午前10時4分
Page 148 of 652
148
1-7. Safety information
RX350/270_EEKey of letters inserted in the above table:
IUF: Suitable for ISOFIX forward-facing child restraint systems of uni-
versal category approved for use in this mass group.
IL: Suitable for child restraint system shows in ISOFIX child restraint
system list.
When using a “LEXUS MINI” or “LEXUS MIDI”, adjust the support leg
and ISOFIX connectors as follows:
Lock the ISOFIX connectors
where numbers 4 and 5 can be
seen.
Lock the support leg where 3rd
hole can be seen.
X: ISOFIX position not suitable for ISOFIX child restraint systems in
this mass group and/or this size class.
*: If the head restraint interferes with your child restraint system, and the head
restraint can be removed, remove the head restraint.
The child restraint system mentioned in the table may not be available
outside of the EU area.
RX350_270_EE_48D77E.book 148 ページ 2014年1月24日 金曜日 午前10時4分
Page 153 of 652
153
1-7. Safety information
1
Before driving
RX350/270_EE
Installing child restraints using a seat belt
■Rear-facing Baby seat/child seat
Fold the seatback while pulling the
seatback angle adjustment lever.
Return the seatback and secure it
at the first lock position. (→P. 7 7 )
Place the child restraint system on
the rear seat facing the rear of the
vehicle.
Run the seat belt through the child
restraint system and insert the
plate into the buckle. Make sure
that the belt is not twisted.
Follow the directions given in the
child restraint system installation
manual and fix the child restraint
system securely in place.
STEP1
STEP2
STEP3
RX350_270_EE_48D77E.book 153 ページ 2014年1月24日 金曜日 午前10時4分
Page 154 of 652
154
1-7. Safety information
RX350/270_EEIf your child restraint system is not
equipped with a lock-off (a seat
belt locking feature), secure the
child restraint system using a lock-
ing clip.
After installing the child restraint system, rock it back and forth to ensure
that it is installed securely.
■Forward-facing Child seat
Fold the seatback while pulling the
seatback angle adjustment lever.
Return the seatback and secure it
at the first lock position. (→P. 7 7 )
Place the child restraint system on
the seat facing the front of the vehi-
cle.
STEP1
STEP2
RX350_270_EE_48D77E.book 154 ページ 2014年1月24日 金曜日 午前10時4分
Page 155 of 652
155
1-7. Safety information
1
Before driving
RX350/270_EERun the seat belt through the child
restraint system and insert the
plate into the buckle. Make sure
that the belt is not twisted.
Follow the directions given in the
child restraint system installation
manual and fix the child restraint
system securely in place.
If your child restraint system is not
equipped with a lock-off (a seat
belt locking feature), secure the
child restraint system using a lock-
ing clip.
After installing the child restraint system, rock it back and forth to ensure
that it is installed securely.
■Junior seat
Fold the seatback while pulling the
seatback angle adjustment lever.
Return the seatback and secure it
at the first lock position. (→P. 7 7 )
STEP3
STEP1
RX350_270_EE_48D77E.book 155 ページ 2014年1月24日 金曜日 午前10時4分
Page 157 of 652
157
1-7. Safety information
1
Before driving
RX350/270_EE
Installation with ISOFIX rigid anchors (ISOFIX child restraint system)
Fold the seatback while pulling the
seatback angle adjustment lever.
Return the seatback and secure it
at the first lock position. (→P. 7 7 )
Widen the gap between
the seat cushion and seat-
back slightly.
Latch the buckles onto the
exclusive fixing bars.
If the child restraint has a top strap,
the top strap should be latched
onto the anchor brackets.
STEP1
STEP2
STEP3
RX350_270_EE_48D77E.book 157 ページ 2014年1月24日 金曜日 午前10時4分