2014 LEXUS RX270 maintenance

516
4-3. Do-it-yourself maintenance
RX350/270_EE
Light bulbs
You may replace the following bulbs by yourself. The difficulty level of
replacement varies depending on the bulb. If necessary bulb replacement
seems difficult to perform, contact any authorized Lexus dealer or
repairer, or another duly qualified and equipped professional.
For more information about replacing other light bulbs, contact any autho-
rized Lexus dealer or repairer, or another duly qualified and equipped pro-
fessional.
■Preparing for light bulb replacement
Check the wattage of the light bulb to be replaced. (→P. 6 1 9 )
■Removing the engine compartment covers
→P. 4 7 0
■Turning off the power back door main switch (if equipped).
→P. 6 2
■Front bulb locations
Vehicles with halogen headlights
Headlight high beam Headlight low beam
Front turn signal light
Front fog light
RX350_270_EE_48D77E.book 516 ページ ２０１４年１月２４日　金曜日　午前１０時４分

517
4-3. Do-it-yourself maintenance
4
Maintenance and care
RX350/270_EE
Vehicles with discharge headlights
■Rear bulb locations
Front turn signal lightFront fog lightHeadlight high beam
Rear turn signal light Back-up light
Rear fog lightTail light
Tail light
RX350_270_EE_48D77E.book 517 ページ ２０１４年１月２４日　金曜日　午前１０時４分

518
4-3. Do-it-yourself maintenance
RX350/270_EE
Replacing light bulbs
■Headlight high beams
Right side:
Open the cap.
Move the washer fluid filler
opening to allow easy access to
the light bulbs.
Unplug the connector while
depressing the lock release.
Turn the bulb base counterclock-
wise.
STEP1
STEP2
STEP3
RX350_270_EE_48D77E.book 518 ページ ２０１４年１月２４日　金曜日　午前１０時４分

519
4-3. Do-it-yourself maintenance
4
Maintenance and care
RX350/270_EEReplace the light bulb, and install
the bulb base.
Align the 3 tabs on the light bulb
with the mounting, and insert.
Turn and secure the bulb base.
Connect the connector.
Shake the bulb base gently to
check that it is not loose, turn the
headlight high beams on once and
visually confirm that no light is leak-
ing through the mounting.
When replacing the right side bulb, install by conducting
with the directions reversed.
STEP4
STEP5
STEP5STEP6STEP5STEP1
RX350_270_EE_48D77E.book 519 ページ ２０１４年１月２４日　金曜日　午前１０時４分

520
4-3. Do-it-yourself maintenance
RX350/270_EE■Halogen headlight low beams (if equipped)
Turn the bulb base counterclock-
wise.
Unplug the connector while
depressing the lock release.
Replace the light bulb, and install
the bulb base.
Align the 3 tabs on the light bulb
with the mounting, and insert.
Turn and secure the bulb base.
Shake the bulb base gently to
check that it is not loose, turn the
headlight low beams on once and
visually confirm that no light is leak-
ing through the mounting.
STEP1
STEP2
STEP3
STEP4
RX350_270_EE_48D77E.book 520 ページ ２０１４年１月２４日　金曜日　午前１０時４分

521
4-3. Do-it-yourself maintenance
4
Maintenance and care
RX350/270_EE■Front turn signal light
Turn the bulb base counterclock-
wise.
Remove the light bulb.
STEP1
STEP2
RX350_270_EE_48D77E.book 521 ページ ２０１４年１月２４日　金曜日　午前１０時４分

522
4-3. Do-it-yourself maintenance
RX350/270_EE■Front fog lights
To allow enough working clear-
ance, turn the steering wheel to
the opposite side of the bulb to be
replaced.
Remove the fender liner bolt and
clips, and then partly remove the
fender liner.
Unplug the connector while
depressing the lock release.
Turn the bulb base counterclock-
wise.
STEP1
STEP2
STEP3
RX350_270_EE_48D77E.book 522 ページ ２０１４年１月２４日　金曜日　午前１０時４分

523
4-3. Do-it-yourself maintenance
4
Maintenance and care
RX350/270_EEReplace the light bulb, and install
the bulb base.
Align the 3 tabs on the light bulb
with the mounting, and insert.
Turn and secure the bulb base.
Connect the connector.
Shake the bulb base gently to
check that it is not loose, turn the
front fog lights on once and visually
confirm that no light is leaking
through the mounting.
When replacing a light bulb, install by conducting with the
directions reversed.
STEP4
STEP5
STEP5STEP6STEP5STEP1
RX350_270_EE_48D77E.book 523 ページ ２０１４年１月２４日　金曜日　午前１０時４分