2014 LEXUS LX570 inflation pressure

8305-2. Steps to take in an emergency
LX570_OM_OM60L21U_(U) CAUTION■
Maintenance of the tires
Each tire, including the spare (if provided ), should be checked monthly when cold
and inflated to the inflation pressure re commended by the vehicle manufacturer on
the vehicle placard or tire inflation pressu re label (tire and load information label).
(If your vehicle has tires of a different size than the size indicated on the vehicle
placard or tire inflation pressure label [t ire and load information label], you should
determine the proper tire inflation pressure for those tires.)
As an added safety feature, your vehicl e has been equipped with a tire pressure
monitoring system (TPMS-tire pressure wa rning system) that illuminates a low tire
pressure telltale (tire pressure warning light) when one or more of your tires is sig-
nificantly under-inflated. Accordingly, when the low tire pressure telltale (tire pres-
sure warning light) illuminates, you should stop and check your tires as soon as
possible, and inflate them to the proper pressure. Driving on a significantly under-
inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation
also reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling
and stopping ability.
Please note that the TPMS (tire pressure warning system) is not a substitute for
proper tire maintenance, and it is the driver’s responsibility to maintain correct tire
pressure, even if under-inflation has not reached the level to trigger illumination of
the TPMS low tire pressure telltale (tire pressure warning light).

8385-2. Steps to take in an emergency
LX570_OM_OM60L21U_(U) Wa r n i n g m e s s a g e Details Correction procedure
Indicates that the auto-
matic transmission fluid
temperature is too high
A buzzer also sounds. Stop the vehicle in a safe
place, shift the shift lever
to P and wait until the light
goes off.
If the light goes off, you
may start the vehicle
again. If the light does
not go off, contact your
Lexus dealer.
Indicates that the washer
fluid level is low Add washer fluid.
Low tire inflation pres-
sure Check the tire inflation
pressure, and adjust to the
appropriate level.

8485-2. Steps to take in an emergency
LX570_OM_OM60L21U_(U) ■
Resetting the tire pressure warning data
After adjusting the tire inflation pressu re, be sure to initialize the data. (  P. 76 4 )
If the message remains on, the system ma y have malfunctioned. Have the vehicle
inspected by your Lexus dealer as soon as possible. ■
Warning message in vehicle-to-vehicle distance control mode of the dynamic
radar cruise control (if equipped)
In the following cases, the warning message may not be displayed even if vehicle-
to-vehicle distance decreases: ●
When your vehicle and the vehicle ahead are traveling at the same speed or the
vehicle ahead is traveling more quickly than your vehicle ●
When the vehicle ahead is traveling at a very low speed ●
Immediately after cruise control speed is set ●
At the instant the accelerator pedal is depressed
NOTICE■
While the engine oil level warning is displayed
Continued engine operation with low engine oil will damage the engine.

8896-1. Specifications
6
Vehicle specifications
LX570_OM_OM60L21U_(U) Suspension
Tires and wheels Fluid type Suspension fluid AHC
Ti r e s i z e P285/50R20 111V
Tire inflation pressure
(Recommended cold tire inflation
pressure) Normal driving
Front:
33 psi (230 kPa, 2.3 kgf/cm 2
or bar)
Rear:
33 psi (230 kPa, 2.3 kgf/cm 2
or bar)
Spare:
33 psi (230 kPa, 2.3 kgf/cm 2
or bar)
Tr a i l e r t o w i n g
Add 2 psi (10 kPa, 0.1 kgf/cm 2
or bar) to the
rear tires.
Wheel size 20  8 1 /2J
Wheel nut torque 97 ft•lbf (131 N•m, 13.4 kgf•m)

8956-1. Specifications
6
Vehicle specifications
LX570_OM_OM60L21U_(U) Tire information Ty p i c a l t i r e s y m b o l s
Tire size (  P. 8 9 7 )
Summer tire or all season tire (  P. 76 6 )An all season tire has “M+S” on the si dewall. A tire not marked “M+S” is a
summer tire.
Uniform tire quality grading For details, see “Uniform Tire Quality Grading” that follows.
DOT and Tire Identification Number (TIN) (  P. 8 9 6 )
Tire ply composition and materials Plies are layers of rubber-coated parallel cords. Cords are the strands
which form the plies in a tire.
Location of treadwear indicators (  P. 76 2 )
Load limit at maximum cold tire inflation pressure (  P. 900)
Maximum cold tire inflation pressure (  P. 900)This means the pressure to which a tire may be inflated.

9006-1. Specifications
LX570_OM_OM60L21U_(U) Warning: The temperature grades for this tire are established for a tire that
is properly inflated and not overloaded.
Excessive speed, underinflation, or excess ive loading, either separately or in
combination, can cause heat buildup and possible tire failure.
Glossary of tire terminology Tire related term Meaning
Cold tire inflation
pressure Tire pressure when the vehicle has been parked for
three hours or more, or has not been driven more than
1 mile or 1.5 km under that condition
Maximum inflation pres-
sure The maximum cold inflated pressure to which a tire
may be inflated, shown on the sidewall of the tire
Recommended inflation
pressure Cold tire inflation pressure recommended by a manu-
facturer
Accessory weight The combined weight (in excess of those standard
items which may be replaced) of automatic transmis-
sion, power steering, power brakes, power windows,
power seats, radio and heater, to the extent that these
items are available as factory-installed equipment
(whether installed or not)
Curb weight The weight of a motor vehicle with standard equip-
ment, including the maximum capacity of fuel, oil and
coolant, and if so equipped, air conditioning and addi-
tional weight optional engine
Maximum loaded
vehicle weight The sum of:
(a) Curb weight
(b) Accessory weight
(c) Vehicle capacity weight
(d) Production options weight
Normal occupant weight 150 lb. (68 kg) times the number of occupants speci-
fied in the second column of Table 1
* that follows
Occupant distribution Distribution of occupants in a vehicle as specified in
the third column of Table 1
* below

9026-1. Specifications
LX570_OM_OM60L21U_(U) Tire related term Meaning
Bead separation A breakdown of the bond between components in the
bead
Bias ply tire A pneumatic tire in which the ply cords that extend to
the beads are laid at alternate angles substantially less
than 90 degrees to the centerline of the tread
Carcass The tire structure, except tread and sidewall rubber
which, when inflated, bears the load
Chunking The breaking away of pieces of the tread or sidewall
Cord The strands forming the plies in the tire
Cord separation The parting of cords from adjacent rubber com-
pounds
Cracking Any parting within the tread, sidewall, or innerliner of
the tire extending to cord material
CT A pneumatic tire with an inverted flange tire and rim
system in which the rim is designed with rim flanges
pointed radially inward and the tire is designed to fit on
the underside of the rim in a manner that encloses the
rim flanges inside the air cavity of the tire
Extra load tire A tire designed to operate at higher loads and at
higher inflation pressures than the corresponding
standard tire
Groove The space between two adjacent tread ribs
Innerliner The layer(s) forming the inside surface of a tubeless
tire that contains the inflating medium within the tire
Innerliner separation The parting of the innerliner from cord material in the
carcass

9036-1. Specifications
6
Vehicle specifications
LX570_OM_OM60L21U_(U) Tire related term Meaning
Intended outboard side-
wall (a)The sidewall that contains a whitewall, bears white
lettering, or bears manufact urer, brand, and/or model
name molding that is higher or deeper than the same
molding on the other sidewall of the tire, or
(b)The outward facing sidewall of asymmetrical tire
that has a particular side that must always face out-
ward when mounted on a vehicle
Light truck (LT) tire A tire designated by its manufacturer as primarily
intended for use on lightweig ht trucks or multipurpose
passenger vehicles
Load rating The maximum load that a tire is rated to carry for a
given inflation pressure
Maximum load rating The load rating for a tire at the maximum permissible
inflation pressure for that tire
Maximum permissible
inflation pressure The maximum cold inflation pressure to which a tire
may be inflated
Measuring rim The rim on which a tire is fitted for physical dimension
requirements
Open splice Any parting at any junction of tread, sidewall, or inner-
liner that extends to cord material
Outer diameter The overall diameter of an inflated new tire
Overall width The linear distance between the exteriors of the side-
walls of an inflated tire, including elevations due to
labeling, decorations, or protective bands or ribs