2014 Lexus IS250 ad blue

301
1. LEXUS PARKING ASSIST MONITOR
PERIPHERAL MONITORING SYSTEM
IS300h/250_Navi_EE
6
XBack up keeping the steering wheel in its
current position
Curved blue line
Curved blue line meets the corner here
zIf you back up too quickly, you may lose
synchronization with the parallel parking
assist.
8Leaving the vehicle stopped, turn the
steering wheel all the way to the left.
zBe sure to turn the steering wheel only
when the vehicle is stopped.
9When the screen changes, keep the
steering wheel in its current position and
back up.
10When the vehicle is parallel with the
road or the shoulder, straighten the
steering wheel.
Check your surroundings visually and
with the mirrors, then back up using the
distance guide lines as a reference, and
stop.
zWhen the vehicle is approximately in the
desired parking location, the parallel park-
ing assist is complete.
NOTICE
●When backing up, be careful not to hit
any obstacles with your vehicle. Back the
vehicle up slowly.
INFORMATION
●There is a possibility that parallel parking
guidance may not be given when backing
up at a very slow speed.
●If the trunk is opened, the parallel parking
assist will be discontinued halfway.
IS_Navi_EE_53C71E.book 301 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

7
323
IS300h/250_Navi_EE
7 2
1
3
4
5
6
8
1. QUICK REFERENCE ........................... 324
2. SOME BASICS ........................................ 325
REGISTERING/CONNECTING
A Bluetooth® PHONE...................................... 326
USING THE TELEPHONE
SWITCH/MICROPHONE ............................ 326
SPEECH COMMAND SYSTEM ................... 327
ABOUT THE CONTACTS IN
THE CONTACT LIST ...................................... 328
WHEN SELLING OR DISPOSING OF
THE VEHICLE ..................................................... 328
3. CALLING ON THE Bluetooth®
PHONE ................................................... 329
BY FAVOURITES LIST ....................................... 330
BY CALL HISTORY ............................................. 330
BY CONTACTS LIST ........................................... 332
BY DIAL PAD ........................................................... 334
BY OFF HOOK SWITCH ................................. 335
SOS ............................................................................... 335
4. RECEIVING ON THE Bluetooth®
PHONE ................................................... 337
INCOMING CALLS............................................. 337
5. TALKING ON THE Bluetooth®
PHONE ................................................... 338
INCOMING CALL WAITING....................... 340
6. Bluetooth® PHONE MESSAGE
FUNCTION ............................................ 341
RECEIVING A MESSAGE ................................ 342
CHECKING MESSAGES.................................. 343
REPLYING TO A MESSAGE
(QUICK REPLY) ................................................. 344
CALLING THE MESSAGE SENDER ......... 345
1. TELEPHONE SETTINGS ..................... 347
TELEPHONE SETTINGS SCREEN .............. 347
“Sound settings” SCREEN .................................. 348
“Messaging settings” SCREEN.......................... 349
“Telephone display settings” SCREEN.......... 350
“Lexus Euro assistance 24 settings”
SCREEN ................................................................... 351
2. CONTACT SETTINGS ......................... 353
“Contacts” SCREEN ............................................. 354
“Favourites” SCREEN........................................... 359
“Delete call history” SCREEN ............................ 363
1. TROUBLESHOOTING ........................ 364
1
TELEPHONE OPERATION
(HANDS-FREE SYSTEM FOR
CELLULAR PHONES)
2SETUP
3WHAT TO DO IF...
TELEPHONE
For vehicles sold outside Europe, some of the functions cannot be operated while driving.
IS_Navi_EE_53C71E.book 323 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

324
IS300h/250_Navi_EE
1. TELEPHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
1. QUICK REFERENCE
The telephone top screen can be used to make a telephone call. To display this screen,
press the “MENU” button on the Remote Touch and select “Telephone”, or the
switch on the steering wheel.
FunctionPage
Telephone operation
Registering/connecting Bluetooth® device50
Calling on the Bluetooth® phone329
Receiving on the Bluetooth® phone337
Talking on the Bluetooth® phone338
Message functionUsing the Bluetooth® phone message function341
Setting up a telephone
Telephone settings347
Contact settings353
Bluetooth® settings56
IS_Navi_EE_53C71E.book 324 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

325
1. TELEPHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
IS300h/250_Navi_EE
TELEPHONE
7
2. SOME BASICS
The hands-free system enables calls to
be made and received without having to
take your hands off the steering wheel.
This system supports Bluetooth
®.
Bluetooth® is a wireless data system
that enables cellular phones to be used
without being connected by a cable or
placed in a cradle.
The operating procedure of the tele-
phone is explained here.
CAUTION
●Use a cellular phone or connect the
Bluetooth® phone only when safe and
legal to do so.
●Your audio unit is fitted with Bluetooth
®
antennas. People with implantable car-
diac pacemakers, cardiac resynchroniza-
tion therapy-pacemakers or implantable
cardioverter defibrillators should main-
tain a reasonable distance between
themselves and the Bluetooth
® antennas.
The radio waves may affect the operation
of such devices.
●Before using Bluetooth
® devices, users
of any electrical medical device other
than implantable cardiac pacemakers,
cardiac resynchronization therapy-pace-
makers or implantable cardioverter
defibrillators should consult the manufac-
turer of the device for information about
its operation under the influence of radio
waves. Radio waves could have unex-
pected effects on the operation of such
medical devices.
NOTICE
●Do not leave your cellular phone in the
vehicle. The temperature inside may rise
to a level that could damage the tele-
phone.
INFORMATION
●If your cellular phone does not support
Bluetooth®, this system cannot function.
●In the following conditions, the system
may not function:
• The cellular phone is turned off.
• The current position is outside the com-
munication area.
• The cellular phone is not connected.
• The cellular phone has a low battery.
●When using Bluetooth
® audio and
hands-free system at the same time, the
following problems may occur:
•The Bluetooth
® connection may be cut.
• Noise may be heard on the Bluetooth
®
audio playback.
IS_Navi_EE_53C71E.book 325 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

326
1. TELEPHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
IS300h/250_Navi_EE
XSteering switch
Volume control switch
zPress the “+” side to increase the volume.
zPress the “-” side to decrease the volume.
Off hook switch
On hook switch
XMicrophone
REGISTERING/
CONNECTING A Bluetooth®
PHONE
To use the hands-free system for cellular
phones, it is necessary to register a cel-
lular phone with the system. (→
P. 5 0)
Bluetooth® PHONE
CONDITION DISPLAY
The condition of the Bluetooth
® phone
appears on the upper right side of the
screen. (→P.18)
USING THE TELEPHONE
SWITCH/MICROPHONE
By pressing the telephone switch, a call
can be received or ended without taking
your hands off the steering wheel.
The microphone is used when talking on
the telephone.
IS_Navi_EE_53C71E.book 326 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

329
1. TELEPHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
IS300h/250_Navi_EE
TELEPHONE
7
3. CALLING ON THE Bluetooth® PHONE
1Press the “MENU” button on the
Remote Touch.
2Select “Telephone”.
3Select the desired button to call from.
zThe telephone top screen can be displayed
by pressing the switch on the steering
wheel.
*: With navigation function
After a Bluetooth® phone has been reg-
istered, a call can be made using the
hands-free system. There are several
methods by which a call can be made, as
described below.
How to make a call listPage
By favourites list330
By call history330
By contacts list332
By dial pad33 4
By e-mail/SMS/MMS345
By POI call*107
SOS335
By off hook switch335
By speech command system280
IS_Navi_EE_53C71E.book 329 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

332
1. TELEPHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
IS300h/250_Navi_EE
1Display the telephone top screen.
(→P.329)
2Select “Contacts”.
3Select the desired contact.
4Select the desired number.
5Check that the “Call” screen is dis-
played.
■FOR PBAP COMPATIBLE
Bluetooth
® PHONES
XWhen “Automatic contact/history trans-
fer” is set to on (→P.350)
1Select “Contacts”.
zContacts are transferred automatically.
2Check that a confirmation screen is dis-
played when the operation is complete.
BY CONTACTS LIST
Calls can be made by using contact data
which is transferred from a registered
cellular phone. (→P.353)
Up to 2500 contacts (maximum of 4
telephone numbers and e-mail address-
es per contact) can be registered in the
contact list.
WHEN THE CONTACT IS
EMPTY
IS_Navi_EE_53C71E.book 332 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

333
1. TELEPHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
TELEPHONE
IS300h/250_Navi_EE
7
XWhen “Automatic contact/history trans-
fer” is set to off (→P.350)
1Select “Contacts”.
2Select the desired item.
3Check that a confirmation screen is dis-
played when the operation is complete.
■FOR PBAP INCOMPATIBLE BUT
OPP COMPATIBLE Bluetooth
®
PHONES
1Select “Contacts”.
2Select the desired item.
No.Function
Select to always transfer all the con-
tacts from a connected cellular
phone automatically.
Select to transfer all the contacts
from a connected cellular phone
only once.
Select to cancel transferring.
No.Function
Select to transfer the contacts from
the connected cellular phone.
Select to add a new contact manual-
ly.
Select to cancel transferring.
IS_Navi_EE_53C71E.book 333 ページ ２０１４年５月２９日　木曜日　午前１１時２２分