Page 78 of 624
76
GX 460 _O M_ OM6 0K 80 U_ (U)2. Instrument cluster
CAUTION
■If a safety system warning light does not come on
Should a safety system light such as th
e ABS/Multi Terrain ABS and the SRS warning
light not come on when you start the engine, this could mean that these systems are not
available to help protect you in an acciden t, which could result in death or serious
injury. Have the vehicle inspected by your Lexus dealer immediately if this occurs.
GX460_OM_OM60K80U_(U).book Page 76 Wednesday, July 3, 2013 11:40 AM
Page 79 of 624

77
GX 460 _O M_ OM6 0K 80 U_ (U)2. Instrument cluster
2
Instrument cluster
Gauges and meters
The units used on the speedometer may di
ffer depending on the target region.
Ta c h o m e t e r
Displays the engine speed in revolutions per minute
Engine coolant temperature gauge
Displays the engine coolant temperature
Multi-information display
Presents the driver with a variety of driving-related data (→P. 8 0 )
Fuel gauge
Displays the quantity of fuel remaining in the tank
Speedometer
Displays the vehicle speed
Rear height control air suspension display
Displays the rear height mode selected ( →P. 3 2 7 )
Shift position and shift range display
Displays the selected shift position or selected shift range ( →P. 1 8 6 )
Odometer and trip meter display
Odometer:
Displays the total distance the vehicle has been driven
Tr i p m e t e r :
Displays the distance the vehicle has been driven since the meter was last reset. Trip
meters A and B can be used to record and display different distances independently.
1
2
3
4
5
6
7
8
GX460_OM_OM60K80U_(U).book Page 77 Wednesday, July 3, 2013 11:40 AM
Page 80 of 624
78
GX 460 _O M_ OM6 0K 80 U_ (U)2. Instrument cluster
Switches between odometer and trip
meter displays. When the trip meter is
displayed, pressing and holding the
button will reset the trip meter.
The brightness of the instrument cluster lights can be adjusted.
Brighter
Darker
Changing the display
Instrument cluster light control switch
1
2
GX460_OM_OM60K80U_(U).book Page 78 Wednesday, July 3, 2013 11:40 AM
Page 81 of 624

GX 460 _O M_ OM6 0K 80 U_ (U)
792. Instrument cluster
2
Instrument cluster
■The meters and display illuminate when
The engine switch is in IGNITION ON mode.
■Instrument cluster brightness adjustment
The instrument cluster brightness levels when the tail lights are on and off can be
adjusted.
■The brightness of the instrument cluster lights
When the tail lights are on, the brightness wi ll change. However, when the surroundings
are bright (daytime, etc.) turning on the tail lights will not change the instrument cluster
brightness.
In addition, the brightness of the instrument cluster lights is automatically adjusted based
on the light sensor detecting ho w bright the surroundings are.
■When disconnecting and reconnecting battery terminals
The trip meter data will be reset.
If the trip meter was displayed last, the odometer will be displayed after resetting.
■Customization
Setting of sensitivity of the ambient light se nsor used for dimming the meter lights can be
changed. (Customizable features →P. 5 7 8 )
NOTICE
■To prevent damage to the engine and its components
●Do not let the indicator needle of the tachometer enter the red zone, which indicates
the maximum engine speed.
●The engine may be overheating if the engine coolant temperature gauge is in the red
zone (H). In this case, immediately stop the vehicle in a safe place, and check the
engine after it has cooled completely. ( →P. 5 4 8 )
GX460_OM_OM60K80U_(U).book Page 79 Wednesday, July 3, 2013 11:40 AM
Page 82 of 624
80
GX 460 _O M_ OM6 0K 80 U_ (U)2. Instrument cluster
Multi-information display
The multi-information display presents the driver with a variety of driving-related
data.
●Trip information contents (
→P. 8 1 )
Displays driving range, fuel consump-
tion and other cruising related informa-
tion
●Electronic features control contents
(→ P. 8 2 )
●Other contents ( →P. 8 3 )
Display contents
GX460_OM_OM60K80U_(U).book Page 80 Wednesday, July 3, 2013 11:40 AM
Page 83 of 624

GX 460 _O M_ OM6 0K 80 U_ (U)
812. Instrument cluster
2
Instrument cluster
Menu switch
Changes modes to electronic features
control mode, customization mode or
back to normal display mode.
“ENTER” switch
Changes trip information items. This
switch is also used to turn on/off elec-
tronic features controls and to change
customization settings.
Trip information items displayed can be switched by pressing the “ENTER”
switch upwards or downwards.
■Outside temperature
Displays the outside temperature
• The temperature range that can be displayed is from -40°F (-40°C) to 122°F(50°C).
• When the outside temperature drops below 37°F (3°C), the outside temperature
display flashes several times.
■Front tire angle
The direction of the front tires is displayed
The tire direction is displayed in 3 stages for both left and right, in accordance with
the angle of the tire.
■Driving range
Displays the estimated maximum distance that can be driven with the quantity
of fuel remaining
• This distance is computed based on your average fuel consumption. As a result,
the actual distance that can be driven may differ from that displayed.
• When only a small amount of fuel is added to the tank, the display may not be updated.
• When refueling, turn the engine switch off. If the vehicle is refueled without turning the engine switch off, the display may not be updated.
■Average fuel consumption after refueling
Displays the average fuel consumption since the vehicle was last refueled
Use the displayed average fuel consumption as a reference.
■Current fuel consumption
Displays the current rate of fuel consumption
Switching the display
1
2
Trip informat ion contents
GX460_OM_OM60K80U_(U).book Page 81 Wednesday, July 3, 2013 11:40 AM
Page 84 of 624

82
GX 460 _O M_ OM6 0K 80 U_ (U)2. Instrument cluster
■Average fuel consumption and Eco
Driving Indicator Zone Display
(→ P. 8 4 )
Displays the average fuel consumption since the function was reset
• The function can be reset by pressing th e “ENTER” switch for longer than 1 second
when the average fuel consumption is displayed.
• Use the displayed average fuel consumption as a reference.
■Average vehicle speed
Displays the average vehicle speed since the engine was started or the func-
tion was reset
The function can be reset by pressing the “ENTER” switch for longer than 1 second
when the average vehicle speed is displayed.
■Elapsed time
Displays the elapsed time since the function was last reset
The function can be reset by pressing the “ENTER” switch for longer than 1 second
when the elapsed time is displayed.
■Display off
A blank screen is displayed
■Multi-terrain Select (if equipped) ( →P. 2 9 8 )
■Intuitive parking assist (if equipped) ( →P. 2 3 4 )
■BSM (Blind Spot Monitor) (if equipped) ( →P. 3 4 7 )
■Second start mode ( →P. 1 8 7 )
Electronic features control contents
GX460_OM_OM60K80U_(U).book Page 82 Wednesday, July 3, 2013 11:40 AM
Page 85 of 624

GX 460 _O M_ OM6 0K 80 U_ (U)
832. Instrument cluster
2
Instrument cluster
■Dynamic radar cruise control display* (if equipped) (→P. 2 1 7 )
■LDA (Lane Departure Alert) display* (if equipped) ( →P. 228)
■Intuitive parking assist display* (if equipped) ( →P. 2 3 4 )
■Crawl Control display* (if equipped) ( →P. 3 3 6 )
■Wa r n i n g m e s s a g e s ( →P. 5 1 4 )
Automatically displayed when a malfunction occurs in one of the vehicles sys-
tems.
■Customization
Settings (e.g. available language) can be changed.
(Customizable features → P. 5 7 8 )
*: Automatically displayed when the system is used
■Electronic features control can be turned on/off when
Engine switch is in IGNITION ON mode.
■System check display
After turning the engine switch to IGNI TION ON mode, “CHECKING” is displayed
while system operation is checked. When the system check is complete, the normal
screen will return.
■Conditions for ending electronic features control
In the following situations, the electronic features control will end automatically:
●The menu switch is pressed
●Intuitive parking assist display starts operating
●The Crawl Control is operated
●The dynamic radar cruise control is operated
●A warning message appears after the electronic features control screen is displayed
Other contents
GX460_OM_OM60K80U_(U).book Page 83 Wednesday, July 3, 2013 11:40 AM