2014 Lexus ES300h update

5
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
To use this system in the safest possible
manner, follow all the safety tips shown be-
low.
This system is intended to assist in reaching
the destination and, if used properly, can do
so. The driver is solely responsible for the
safe operation of your vehicle and the safety
of your passengers.
Do not use any feature of this system to the
extent it becomes a distraction and pre-
vents safe driving. The first priority while
driving should always be the safe operation
of the vehicle. While driving, be sure to ob-
serve all traffic regulations.
Prior to the actual use of this system, learn
how to use it and become thoroughly famil-
iar with it. Read the entire Navigation Sys-
tem Owner’s Manual to make sure you
understand the system . Do not allow other
people to use this system until they have
read and understood th e instructions in this
manual.
For your safety, some functions may be-
come inoperable when driving. Unavailable
screen buttons are dimmed. Only when the
vehicle is not moving, can the destination
and route selection be done. While driving, listen to
the voice instructions
as much as possible and glance at the
screen briefly and only when it is safe. How-
ever, do not totally rely on voice guidance.
Use it just for referenc e. If the system can-
not determine the current position correct-
ly, there is a possibility of incorrect, late, or
non-voice guidance.
The data in the system may occasionally be
incomplete. Road conditions, including
driving restrictions (no left turns, street clo-
sures, etc.) frequently change. Therefore,
before following any instructions from the
system, look to see whether the instruction
can be done safely and legally.
This system cannot warn about such things
as the safety of an area, condition of streets,
and availability of emergency services. If un-
sure about the safety of an area, do not drive
into it. Under no circumstances is this sys-
tem a substitute for the driver’s personal
judgement.
Use this system only in locations where it is
legal to do so. Some states/provinces may
have laws prohibiting the use of video and
navigation screens next to the driver.
SAFETY INSTRUCTIONCAUTION
●For safety, the driver should not operate
the navigation system while he/she is
driving. Insufficient attention to the road
and traffic may cause an accident.
●While driving, be sure to obey the traffic
regulations and maintain awareness of
the road conditions. If a traffic sign on the
road has been changed, route guidance
may not have the updated information
such as the direction of a one way street.

52
2. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
No.Function
Select to change the time zone and
select “On” or “Off” for daylight sav-
ing time. (See “SYSTEM TIME SET-
TINGS” on page 53.)
Select to change the language. (See
“SELECTING A LANGUAGE” on
page 54.)
Select to change the distance unit.
(See “UNIT OF MEASUREMENT”
on page 54.)
Select to change the screen button
color. (See “SELECTING A BUT-
TON COLOR” on page 55.)
Select to change th e keyboard layout.
(See “SELECTING A KEYBOARD
LAYOUT” on page 55.)
Select to customize the startup im-
age. (See “CHANGING THE
STARTUP IMAGE” on page 56.)
Select to customize the screen off im-
age. (See “CHANGING THE
SCREEN OFF IMAGE” on page
58.)
Select to set automatic screen chang-
es from the audio/air conditioning
control screen to the previous screen
to “On” or “Off” . If “On” is selected,
the screen will automatically return to
the previous screen from the audio/
air conditioning control screen after
20 seconds.
Select to turn the selection sounds
“On” or “Off” .
Select to turn the pointer sounds
“On” or “Off” .
Select to turn the error sounds “On”
or “Off” .
Select to adjust the pointer sound vol-
ume. (See “POINTER SOUND
VOLUME SETTINGS” on page 60.)
Select to adjust th e strength of the
pull from the buttons to the pointer.
(See “SETTING A FEEDBACK
FORCE” on page 60.)
Select to delete personal data. (See
“DELETING PERSONAL DATA”
on page 61.)
Select to update program versions.
For details, contact your Lexus deal-
er.
Select to update gracenote database
versions. For details, contact your
Lexus dealer.
No.Function

68
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1. DESTINATION SEARCH
1. DESTINATION SEARCH
1Press the “MENU” button on the
Remote Touch.
2Select “Destination”.
3This screen is displayed.
zOne of 11 different methods can be used to
search a destination. (See pages 69
through 85.)
1Select “Change State/Province” to dis-
play a list of the states/provinces/terri-
tories of the United States and Canada.
2Select the desired state (province).
z The previous screen will be displayed.
INFORMATION
●
When searching a destination, the
response to the screen button may be
slow.
SELECTING THE SEARCH
AREA
The selected state (province) can be
changed to set a destination from a dif-
ferent state (province) by using “A d -
dress” , “Point of Interest” or
“Intersection & Freeway” .
zFor map database information and
updates, see “MAP DATABASE VER-
SION AND COVERAGE AREA” on
page 324.
z If a state (province) has not been
selected yet, “Select State/Province” is
displayed.

79
1. DESTINATION SEARCH
3
NAVIGATION SYSTEM
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1Press the “MENU” button on the
Remote Touch, then select
“Destination” .
2Select “Point of Interest” on the “Desti-
nation” screen.
3Select “Phone #” on the “Point of Inter-
est” screen.
4Input a phone number.
5After inputting a phone number, select
“OK” .
zWhen a phone number is input, the “Con-
firm Destination” screen may be displayed.
If “Go” is selected on the “Confirm Desti-
nation” screen, the navigation system per-
forms a search for the route. (See
“STARTING ROUTE GUIDANCE” on
page 87.)
z If there is more than 1 site with the same
number, the following screen will be dis-
played.
1Press the “MENU” button on the
Remote Touch, then select
“Destination” .
2Select “Point of Interest” on the “Desti-
nation” screen.
3Select “eDestination” on the “Point of
Interest” screen.
z With the eDestination feature, you can go
online, via the Lexus.com owner’s Web site,
to select and organize destinations of your
choice and then wirelessly send them to
your vehicle’s navigation system. Up to
200 locations can be stored online and
accessed or updated at any time. Locations
can be organized into up to 20 folders.
(See “eDestination” on page 367.)
SEARCH BY “Phone #”zTo set an address book entry as a desti-
nation using the phone number, the num-
ber must already be registered with the
address book entry. (See page 118.)
INFORMATION
●
If there is no match for the phone number
input, a list of identical numbers with dif-
ferent area codes will be displayed.
SEARCH BY “eDestination”

95
2. ROUTE GUIDANCE
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
3
NAVIGATION SYSTEM
■ROUTES INCLUDING IPD ROADS
zAfter it has made a route calculation, the
system will advise the user whether IPD
roads are included in the route or not.
z The portion of the route that covers IPD
roads is indicated by light blue.
Even when on IPD roads (roads that are
not completely digi tized in our data-
base), you will be guided along the
searched route via voice guidance.
No.Voice guidance
“On the way to your destination,
there will be roads with incomplete
data.”
“In half of a mile, left turn.”
“Next left. Upcoming roads have in-
complete data. Please carefully ob-
serve the local traffic restrictions, as
they may not match the navigation
guidance.”
z IPD roads are roads that are not yet com-
pletely digitized in our database. How-
ever, their geometry, name and
administrative coding are already known.
CAUTION
●Be sure to obey the traffic regulations and
keep the road condition in mind espe-
cially when you are driving on IPD roads.
The route guidance may not have the
updated information such as the direction
of a one way street.

170
1. PHONE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
6Select “Play” to start reading out of the
message. Select “Stop” to stop the func-
tion.
z Select “-” or “+”, turn the “PWR·VOL”
knob, or use the volume switch on the
steering wheel to adjust the message read
out volume.
z The message read out function is available
even while driving.1Select “Reply” .
2Select the screen button corresponding
to the desired message.
3Select “Send” .
zWhile the message is being sent, a sending
message screen is displayed.
4This screen will be displayed if message
delivery fails.
zSelect “Retry” to attempt to send the mes-
sage again or select “Cancel” to cancel.
zWhen the received message is an e-mail
and “Update Message Read Status on
Phone” is set to “On”, “Mark as Unread”
or “Mark as Read” can be selected.
Select “Mark as Unread” to mark mails
that have been read on the Bluetooth
®
phone as unread. Conversely, select
“Mark as Read” to mark mails that have
not been read on the Bluetooth
® phone
as read. (See “MESSAGE SETTINGS”
on page 187.)
z For SMS/MMS, selecting or
pressing the switch on the steering
wheel calls the sender. (See page 164.)
z Select “Reply” to reply to the message.
(See page 170.)
REPLYING (QUICK REPLY)

175
2. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
4
PHONE
■THE “Contacts” SCREEN CAN
ALSO BE DISPLAYED
1Press the “MENU” button on the
Remote Touch, then select “Phone”.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
2Select “Contacts” on the “Phone”
screen.
3Select “Options” .
4Select “Manage Contacts” .
■TRANSFERRING A PHONE NUM-
BER
X For PBAP compatible Bluetooth®
phones
1Select “Transfer Contacts” .
2Select “Update Contacts” .
The phone numbers in a Bluetooth®
phone can be transferred to the system.
The system can manage up to 5 phone-
books. Up to 1000 contacts (maximum
of 3 numbers per contact) can be regis-
tered in each phonebook.
Operation methods differ between
PBAP compatible and PBAP incompat-
ible but OPP compatible Bluetooth
®
phones.
If your cellular phone is neither PBAP
nor OPP compatible, the phonebook
cannot be transferred.

180
2. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
■THE “Edit Contact” SCREEN CAN
ALSO BE DISPLAYED
X From the “Contact” screen
1Press the “MENU” button on the
Remote Touch, then select “Phone”.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
2Select “Contacts” on the “Phone”
screen.
3Select the desired da ta from the list on
the “Contacts” screen.
4Select “Options” .
5Select “Edit”. X
From the “Call History” screen
1Press the “MENU” button on the
Remote Touch, then select “Phone”.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
2Select “Call History” on the “Phone”
screen.
3Select the desired number from the list
on the “Call History” screen.
4Select “Add to Contacts” or “Update
Contact” .
5If “Update Contact” has been selected,
this screen will be displayed. Select the
desired data from the list.