2014 Lexus ES300h bluetooth

159
1. PHONE OPERATION
4
PHONE
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
4When the data transfer from a PBAP in-
compatible but OPP compatible model
is complete, “Done” will appear on the
screen. Select “Done”.1Select “Speed Dials” .
2Select the desired number to call.
zThe list to be displayed can be changed by
selecting the “Speed Dial 1” , “Speed Dial
2” or “Speed Dial 3” tab.
INFORMATION
●
Depending on the type of Bluetooth®
phone:
• It may be necessary to perform addi- tional steps on the phone when transfer-
ring phonebook data.
• The registered image on the phone- book may not appe ar when phonebook
data is transferred.
BY SPEED DIAL
Calls can be made using registered
phone numbers which can be selected
from a phonebook. (See “REGISTER-
ING THE SPEED DIAL” on page 183
for registering the speed dial.)
This can be operated while driving.

162
1. PHONE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1Press the talk switch.
z“Call ” is displayed in the
“Shortcut Menu” screen.
z When “Call ” on the “Short-
cut Menu” screen is dimmed, the phone-
book’s voice command recognition cannot
be used. Check the Bluetooth
® connec-
tion and if the contacts have been trans-
ferred to the navigation system.
2Say the name, or the name and type of
phone, of a registered contact.
z In the same manner as it is displayed on the
screen, “Call ”, after saying
“Call” say the name, or the name and type
of phone, of a contact.
For example: “Call” , “John Smith” or “Call” ,
“Mary Davis” , “Mobile”
z There are 4 types of phones: Home,
Mobile, Office and Other.
z Short or abbreviated names in the phone-
book may not be recognized. Change
names in the phonebook to full names.
z Sometimes a voice recognition result con-
firmation screen will be displayed. After
confirming the result, say “Yes” or “No” .
z When the system recognizes multiple
names from the phoneb ook, a name candi-
date list will be displayed on the screen. If
the desired name is not displayed on the
top of the screen, say the number of the
name from the candidate list (number 1 and
number 2) to select a name from the candi-
date list. z
When a contact has multiple phone num-
bers registered in the phonebook, a candi-
date list will be displa yed. If the desired
phone number is not displayed on the top
of the screen, say the number of the desired
phone number from the candidate list
(number 1 and number 2) to select a phone
number from the candidate list.
3Say “Dial” to call the phone number.
1Press the talk switch.
z“Dial ” is displayed in the “Short-
cut Menu” screen.
z When “Dial ” on the “Shortcut
Menu” screen is dimmed, the phone num-
ber voice recognitio n cannot be used.
Check the Bluetooth
® phone connection.
2Say the phone number.
z In the same manner as it is displayed on the
screen, “Dial ”, after saying “Dial”
say the phone number.
z Say the phone number one digit at a time.
For example, if the phone number is
2345678:
Say “two three four five six seven eight”
Do not say “twenty three forty five sixty
seven eight”
VOICE COMMAND
EXAMPLE: CALL NAME
VOICE COMMAND
EXAMPLE: DIAL NUMBER

165
1. PHONE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
4
PHONE
5. RECEIVE ON THE Bluetooth® PHONE
1Select or press the switch on
the steering wheel to talk on the phone.
When a call is received, this screen is
displayed with a sound.
To refuse to receive the call: Select
or press the switch on the
steering wheel.
To adjust the volume of a received call :
Select “-” or “+”, turn the “PWR·VOL”
knob, or use the volume switch on the
steering wheel.
INFORMATION
●
During international phone calls, the
other party’s name or number may not be
displayed correctly depending on the
type of cellular phone you have.
●The incoming call display mode can be
set. (See “INCOMING CALL DIS-
PLAY” on page 192.)

166
1. PHONE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
6. TALK ON THE Bluetooth® PHONE
1Select the desired number to input the
key.
While talking on the phone, this screen is
displayed. The operations outlined be-
low can be performed on this screen.
To adjust the volume of the other party’s
voice: Select “-” or “+” , turn the
“PWR·VOL” knob, or use the volume
switch on the steering wheel.
To hang up the phone : Select or
press the switch on the steering
wheel.
To mute your voice : Select “Mute”.
To i n p u t a k e y : Select “0-9”.
To transfer the call : Select “Handset
Mode” to change from hands-free call to
cellular phone call. Select “Handsfree
Mode” to change from cellular phone call
to hands-free call.
INFORMATION
●
Changing from hands-free call to cellular
phone call is not possible while driving.
●When cellular phone call is changed to
hands-free call, the ha nds-free screen will
be displayed and its functions can be
operated on the screen.
●Changing between cellular phone call
and hands-free call can be performed by
operating the cellular phone directly.
●Transferring methods and operations will
be different depending on the type of cel-
lular phone you have.
●For the operation of the cellular phone,
see the manual that comes with it.
WHEN YOU SELECT “0-9”
INPUTTING A KEY
Inputting a key is not possible while driv-
ing.
To hang up the phone : Select or
press the switch on the steering
wheel.

168
1. PHONE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1Select or press the switch
on the steering wheel to start talking
with the other party.
INCOMING CALL WAITING
When a call is interrupted by a third par-
ty while talking, this screen is displayed.
zSelect or press the switch
on the steering wheel to refuse the call.
zEach time is selected or the
switch on the steering wheel is pressed
during an interrupted call, the party who
is on hold will be switched.
INFORMATION
●
If your cellular phone does not support
HFP Ver. 1.5, this function cannot be used.
●The ring tone that has been set in the
“Phone Sound Settings” screen sounds
when there is an incoming call. Depend-
ing on the type of Bluetooth
® phone,
both the navigation system and
Bluetooth
® phone may sound simulta-
neously when there is an incoming call.
(See “RING TONE SETTING” on page
173.)

169
1. PHONE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
4
PHONE
7. Bluetooth® PHONE MESSAGE FUNCTION
1Press the “MENU” button on the
Remote Touch. (See “Remote Touch”
on page 10.)
2Select “Phone” on the “Menu” screen.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
3Select “Messages” .
zDepending on the type of Bluetooth®
phone being connected, it may be neces-
sary to perform additional steps on the
phone.
z When “Message Transfer” is set to “Off ”, a
confirmation screen will be displayed.
Select “Yes”. (See page 187.)
4Select the screen button corresponding
to the desired message.
zMessages are displayed in the appropriate
connected Bluetooth® phone’s registered
mail address folder. Select the tab of the
desired folder to be displayed.
5Messages can be checked.
z Selecting “Previous” or “Next” displays the
previous or next message.
z Only received messages on the connected
Bluetooth
® phone can be displayed.
z The text of the message is not displayed
while driving.
Received messages can be forwarded
from the connected Bluetooth
® phone,
enabling checking and replying using
the navigation system (Quick reply).
CHECKING MESSAGES

170
1. PHONE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
6Select “Play” to start reading out of the
message. Select “Stop” to stop the func-
tion.
z Select “-” or “+”, turn the “PWR·VOL”
knob, or use the volume switch on the
steering wheel to adjust the message read
out volume.
z The message read out function is available
even while driving.1Select “Reply” .
2Select the screen button corresponding
to the desired message.
3Select “Send” .
zWhile the message is being sent, a sending
message screen is displayed.
4This screen will be displayed if message
delivery fails.
zSelect “Retry” to attempt to send the mes-
sage again or select “Cancel” to cancel.
zWhen the received message is an e-mail
and “Update Message Read Status on
Phone” is set to “On”, “Mark as Unread”
or “Mark as Read” can be selected.
Select “Mark as Unread” to mark mails
that have been read on the Bluetooth
®
phone as unread. Conversely, select
“Mark as Read” to mark mails that have
not been read on the Bluetooth
® phone
as read. (See “MESSAGE SETTINGS”
on page 187.)
z For SMS/MMS, selecting or
pressing the switch on the steering
wheel calls the sender. (See page 164.)
z Select “Reply” to reply to the message.
(See page 170.)
REPLYING (QUICK REPLY)

174
2. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1Press the “MENU” button on the
Remote Touch. (See “Remote Touch”
on page 10.)
2Select “Setup” on the “Menu” screen.
3Select “Phone” on the “Setup” screen.
4Select “Phonebook” .
5Perform each setting according to the
procedures outlined on the following
pages.
1Press the “MENU” button on the
Remote Touch, then select “Setup”.
2Select “Phone” on the “Setup” screen.
3Select “Phonebook” on the “Phone Set-
tings” screen.
4Select “Manage Contacts” .
5Perform each setting according to the
procedures outlined on the following
pages.
PHONEBOOK
The call history can be deleted and
phonebook and speed dial settings can
be changed.
INFORMATION
●
Phonebook data is managed indepen-
dently for every registered phone. When
one phone is connected, another phone’s
registered data cannot be read.
SETTING THE PHONEBOOK
The phonebook can be transferred from
a Bluetooth
® phone to the system. The
phonebook also can be added, edited
and deleted.