157
1. PHONE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
4
PHONE
4. CALL ON THE Bluetooth® PHONE
1Press the “MENU” button on the
Remote Touch. (See “Remote Touch”
on page 10.)
2Select “Phone” on the “Menu” screen.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
3Select the desired keys to input the
phone number.
zEach time is select ed, an input digit is
deleted.
4Select or press the switch on
the steering wheel.
z Depending on the type of Bluetooth®
phone being connected, it may be neces-
sary to perform additional steps on the
phone.
1Select “Contacts” .
2Select the desired data from the list.
After a Bluetooth® phone has been reg-
istered, a call can be made using the
hands-free system. There are 7 methods
by which a call can be made. These are
described below.
BY DIAL
A call can be made by inputting the
phone number.
This cannot be operated while driving.
BY PHONEBOOK
Calls can be made by using the phone-
book data which is transferred from the
registered cellular phone.
The phonebook changes depending on
the phone connected. Up to 1000 con-
tacts (maximum of 3 numbers per con-
tact) can be regi stered in each
phonebook.
This cannot be operated while driving.
158
1. PHONE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
3Select the desired number from the list.
4Select or press the switch on
the steering wheel.
1Select “Contacts” .
2Select “Yes” or “Transfer” to automati-
cally transfer the phonebook from the
connected phone.
z Select “Manual” to transfer the phonebook
manually. (See “TRANSFERRING A
PHONE NUMBER” on page 175.)
z Select “No” or “Cancel” to cancel transfer-
ring.
z If your cellular phone is neither PBAP nor
OPP compatible, the phonebook cannot
be transferred.
X PBAP compatible models
X PBAP incompatible but OPP compatible
models
3Transfer the phonebook data to the sys-
tem using the Bluetooth
® phone.
zDepending on the type of cellular phone,
OBEX authentication may be required
when transferring phonebook data. Enter
“1234” into the Bluetooth
® phone.
z This screen appears while transferring. To
cancel this function, select “Cancel” .
WHEN THE PHONEBOOK IS
EMPTY