2014 Lexus ES300h light

281
1. AUDIO/VIDEO SYSTEM OPERATION
5
AUDIO/VIDEO SYSTEM
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
zHandle discs carefully, especially when
inserting them. Hold them on the edge and
do not bend them. Avoid getting finger-
prints on them, partic ularly on the shiny
side.
z Dirt, scratches, warping, pin holes or other
disc damage could cause the player to skip
or to repeat a section of a track. (To see a
pin hole, hold the disc up to the light.)
z Remove discs from the players when not in
use. Store them in their plastic cases away
from moisture, heat and direct sunlight.
To c l e a n a d i s c : Wipe it with a soft, lint-free
cloth that has been dampened with water.
Wipe in a straight line from the center to the
edge of the disc (not in circles). Dry it with
another soft, lint-free cloth. Do not use a
conventional record cleaner or anti-static
device.
z MP3 (MPEG Audio Layer 3) and WMA
(Windows Media Audio) are audio com-
pression standards.
z The MP3/WMA player can play MP3 and
WMA files on CD-ROM, CD-R and CD-
RW discs.
z The unit can play disc recordings compati-
ble with ISO 9660 level 1 and level 2 and
with the Romeo and Joliet file system.
z When naming an MP3 or WMA file, add
the appropriate file extension (.mp3 or
.w m a ) .
z The MP3/WMA player plays back files
with .mp3 or .wma file extensions as MP3
or WMA files. To prevent noise and play-
back errors, use the appropriate file exten-
sions.
z The MP3/WMA player can play only the
first session when using multi-session com-
patible CDs.
NOTICE
●Do not use special shaped, transparent/
translucent, low quality or labeled discs
such as those shown in the illustrations.
The use of such discs may damage the
player, or it may be impossible to eject the
disc.
●This system is not designed for use of
DualDiscs. Do not use DualDiscs
because they may cause damage to the
player.
●Do not use discs with a protection ring.
The use of such discs may damage the
player, or it may be impossible to eject the
disc.
●Do not use printable discs. The use of
such discs may damage the player, or it
may be impossible to eject the disc.
Correct Wrong
MP3/WMA FILES

283
1. AUDIO/VIDEO SYSTEM OPERATION
5
AUDIO/VIDEO SYSTEM
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
zIt is not possible to ch eck folders that do not
include MP3/WMA files.
z MP3/WMA files in folders up to 8 levels
deep can be played. However, the start of
playback may be delayed when using discs
containing numerous levels of folders. For
this reason, we recommend creating discs
with no more than 2 levels of folders.
z The play order of the compact disc with the
structure shown above is as follows:
z MP3/WMA player: It is possible to play up
to 192 folders or 255 files on one disc.
z USB memory: It is possible to play up to
3000 folders, 255 f iles per folder or
9999 files in the device.
z The order changes depending on the per-
sonal computer and MP3/WMA encoding
software you use. z
CD-R/CD-RW discs that have not been
subject to the “finalizing process” (a pro-
cess that allows discs to be played on a
conventional CD player) cannot be played.
z It may not be possible to play CD-R/CD-
RW discs recorded on a music CD
recorder or a personal computer because
of disc characteristics, scratches or dirt on
the disc, or dirt, condensation, etc. on the
lens of the unit.
z It may not be possible to play discs
recorded on a personal computer depend-
ing on the application settings and the envi-
ronment. Record with the correct format.
(For details, contact the appropriate appli-
cation manufacturers of the applications.)
z CD-R/CD-RW discs may be damaged by
direct exposure to sunlight, high tempera-
tures or other storage conditions. The unit
may be unable to play some damaged
discs.
z If you insert a CD-RW disc into the MP3/
WMA player, playback will begin more
slowly than with a conventional CD or CD-
R disc.
z Recordings on CD-R/CD-RW cannot be
played using the DDCD (Double Density
CD) system.
001.mp3
002.wma
Folder 1
003.mp3
Folder 2
004.mp3
005.wma
Folder 3006.mp3
001.mp3 002.wma . . . 006.mp3
CD-R AND CD-RW DISCS

293
1. AIR CONDITIONING SYSTEM OPERATION
6
AIR CONDITIONING
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
Air flow control buttonsPress/select to change the air outlets.298
Passenger’s side tem-
perature control button
Press/select to control the passenger’s side tem-
perature.
When you press/select this button, the “DUAL”
indicator light will turn on, and the mode will
change to independent mode.
296
Windshield wiper de-
icer (If equipped)Select to prevent ice from building up on the wind-
shield and wiper blades.301
(Micro dust and
pollen filter button)Select to remove micro dust and pollen.302
Windshield air flow
buttonPress to defog the windshield.297
Rear window and out-
side rear view mirror
defogger buttonPress to defog the rear window and outside rear
view mirror.301
“DUAL” button/
“DUAL”Press/select to set th e temperatures indepen-
dently for the driver’s, and front passenger’s seat.296
Air intake control but-
tonPress to change the function between outside air,
recirculated air and automatic mode.299
“AUTO” buttonPress to use the automatic air conditioning sys-
tem.295
“OFF” buttonPress to turn the fan off.295, 297
“A/C”Select to change the ai r conditioning between on
and off.302
No.NameFunctionPage

344
3. XM FUNCTION OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
4Select the desired traffic event.
“On Current Route” : Select to display the
traffic congestion information for the select-
ed route, or the road which the current ve-
hicle is on. If a route has not been set, “On
Current Road” will be displayed.
5This screen is displayed.
z Guidance route traffic information is dis-
played on the screen. Select “Detail” to
display detailed traffic event information.
1Select “Show on Map” .
2Select “Traffic Information” .
zThe “Traffic Information” indicator is high-
lighted.
3XM NavTraffic® information is dis-
played on the map screen.
X On the map screen
X On the freeway information screen
SHOW XM NavTraffic®
INFORMATION

369
2. LEXUS ENFORM WITH SAFETY CONNECT OPERATION
9
LEXUS ENFORM WITH SAFETY CONNECT
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
7Select the button of the screen for the
appropriate action.
1Select “Show on Map” .
2Select “eDestination Icons” .
zThe “eDestination Icons” indicator is high-
lighted.
“Mark” : Select to mark the POI on the
navigation map.
“Map” : Select to display the POI on the
navigation map.
“Go” : Select to set the POI as a destina-
tion with route directions.
“Detail” : Select to read the POI notes you
entered online, if any.
z If is selected, the registered
phone number can be called.
SHOW eDestination ICONS

385
1. REAR VIEW MONITOR SYSTEM
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
10
PERIPHERAL MONITORING SYSTEM
3. THINGS YOU SHOULD KNOW
If you notice any of the following symptoms, refer to the likely cause and the solution,
and re-check.
If the symptom is not resolved by the solution, have the vehicle inspected by your Lexus
dealer.
IF YOU NOTICE ANY SYMPTOMS
SymptomLikely causeSolution
The image is difficult to see• The vehicle is in a dark area
• The temperature around
the lens is either high or low
• The outside temperature is
low
• There are water droplets on
the camera
• It is raining or humid
• Foreign matter (mud etc.) is
adhering to the camera
• Sunlight or headlights are
shining directly into the
camera
• The vehicle is under fluo-
rescent lights, sodium lights,
mercury lights etc.Back up while visually check-
ing the vehicle’s surroundings.
(Use the monitor again once
conditions have been im-
proved.)
The procedure for adjusting
the picture quality of the rear
view monitor system is the
same as the procedure for ad-
justing the navigation screen.
(See page 38.)
The image is blurryDirt or foreign matter (such as
water droplets, snow, mud
etc.) is adheri ng to the cam-
era.Rinse the camera lens with
water and wipe it clean with a
soft cloth.
Wash with a mild soap if the
dirt is stubborn.
The image is out of alignmentThe camera or surrounding
area has received a strong im-
pact.Have the vehicle inspected by
your Lexus dealer.
The fixed guide lines are very
far out of alignmentThe camera position is out of
alignment.Have the vehicle inspected by
your Lexus dealer.
• The vehicle is tilted (there is
a heavy load on the vehicle,
tire pressure is low due to a
tire puncture, etc.)
• The vehicle is used on an
incline.If this happens due to these
causes, it does not indicate a
malfunction.
Back up while visually check-
ing the vehicle’s surroundings.