2014 Lexus CT200h turn signal

5027-3. Do-it-yourself maintenance
CT200h_OM_OM76135E_(EE)
After installing the new bulb,
secure the socket to the light
body.
When inserting the socket, align the
marks printed on the light body and
the socket.
Install the visor cover on the mir-
ror frame, secure it with a screw,
and install the side turn signal light
and outer foot light.
Use only the screw position shown in
the illustration.
Side turn signal light: Align the tabs
on the light and th e cover and install.
Outer foot light: Interlock the tabs in
the groove of the light body with
those on the cover, and secure.
Disconnect the tabs, and sepa-
rate the top and bottom of the
rear side cover of the mirror.
7
8
9
CT200h_OM_OM76135E_(EE).book Page 502 Friday, May 30, 2014 1 1:14 AM

5037-3. Do-it-yourself maintenance
CT200h_OM_OM76135E_(EE)
7
Maintenance and care
Install the cover of the back end
of the mirror, installing the lower
side and the upper side in that
order.
When installin g the lower side of the
cover, insert the side turn signal light
pin into the hole in the cover.
Secure the cover with screws and
reconnect the connectors back
together.
Secure the cords by returning them
to the hooks as they were.
Align the tabs, and secure the
mirror by pushing in each diago-
nally-opposite pair of tabs in
order.
Make sure to insert the tabs in order
as shown in the illustration, and push
them in until a click is heard.
If you do not hear the click, do not
force the tabs in. Instead, remove the
mirror and check that the tabs are
aligned.
10
11
12
CT200h_OM_OM76135E_(EE).book Page 503 Friday, May 30, 2014 1 1:14 AM

5047-3. Do-it-yourself maintenance
CT200h_OM_OM76135E_(EE)
■Replacing the following bulbs
If any of the lights listed below has burnt out, have it replaced by any autho-
rized Lexus dealer or repairer, or another duly qualified and equipped profes-
sional.
●Headlight low beams (LED type)
●Daytime running lights and front position lights
●LED front fog lights (if equipped)
●Side turn signal lights
●Stop/tail lights
●High mounted stoplight
●License plate lights
■After replacing the bulbs
■LED lights
The headlight low beams (LED type), front position lights, daytime running lights, LED
front fog lights (if equipped), side turn signal lights, stop/tail lights, high mounted stoplight
and license plate lights consist of a number of LEDs. If any of the LEDs burn out, take
your vehicle to any authorized Lexus dealer or repairer, or another duly qualified and
equipped professional to have the light replaced.
■Condensation build-up on the inside of the lens
Temporary condensation build-up on the inside of the headlight lens does not indicate a
malfunction. Contact any authorized Lexus dealer or repairer, or another duly qualified
and equipped professional for more information in the following situations:
●Large drops of water have built up on the inside of the lens.
●Water has built up inside the headlight.
■When replacing light bulbs
→ P. 4 8 8
After removing the power control unit cover,
return the cover to original position with the
clips.
Push up center portion
Insert
Press
1
2
3
CT200h_OM_OM76135E_(EE).book Page 504 Friday, May 30, 2014 1 1:14 AM

5088-1. Essential information
CT200h_OM_OM76135E_(EE)
Emergency flashers
Press the switch.
All the turn signal lights will flash. To turn
them off, press the switch once again.
■Emergency flashers
If the emergency flashers are used for a long time while the hybrid system is not operat-
ing (while the “READY” indicator is not illu minated), the 12-volt battery may discharge.
The emergency flashers are used to warn other drivers when the vehicle has
to be stopped in the road due to a breakdown, etc.
CT200h_OM_OM76135E_(EE).book Page 508 Friday, May 30, 2014 1 1:14 AM

5869-1. Specifications
CT200h_OM_OM76135E_(EE)
XCompact spare tire (if equipped)
Ti r e s i z eT125/70D17 98M
Spare tire inflation pressure
(Recommended cold tire
inflation pressure)
420 kPa (4.2 kgf/cm2 or bar, 60 psi)
Wheel size17 × 4 T
Wheel nut torque103 N•m (10.5 kgf•m, 76 ft•lbf)
Light bulbs
Light bulbsWTy p e
Exterior
Headlights
Low beam (halogen bulbs)
*High beam55
65AB
Front fog lights (halogen bulbs)*19C
Front turn signal lights21D
Rear turn signal lights21D
Back-up lights16E
Rear fog light21E
Outer foot lights5E
Interior
Front interior/personal lights5E
Rear interior light8F
Vanity lights8E
Luggage compartment light5F
A: H11 halogen bulbs
B: H9 halogen bulbs
C: H16 halogen bulbs D: Wedge base bulbs (amber) E: Wedge base bulbs (clear)
F: Double end bulbs
*: If equipped
CT200h_OM_OM76135E_(EE).book Page 586 Friday, May 30, 2014 1 1:14 AM

5939-2. Customization
CT200h_OM_OM76135E_(EE)
9
Vehicle specifications
■Tu r n s i g n a l l e v e r ( →P. 188)
■Automatic light control system ( →P. 1 9 0 )
■Illumination ( →P. 4 2 6 )
FunctionDefault
settingCustomized setting
Times of flashing of the lane
change signal flashers3
5
O––O
7
9
11
Off
1234
FunctionDefault settingCustomized setting
Light sensor sensitivityStandard-2 to 2O–OO
Welcome light
illumination control On Off – – – O
1234
FunctionDefault
settingCustomized setting
Time elapsed before the inte-
rior lights turn off 15 secondsOff
O–OO
7. 5 s e c o n d s
30 seconds
Time elapsed before the exte-
rior lights turn off15 seconds
Off
O–OO7. 5 s e c o n d s
30 seconds
Operation after the power
switch is turned offOnOff–––O
Operation when the doors
are unlocked with the Smart
entry & start system or the
wireless remote control func-
tion or the mechanical key
*
OnOff–––O
1234
CT200h_OM_OM76135E_(EE).book Page 593 Friday, May 30, 2014 1 1:14 AM

5989-2. Customization
CT200h_OM_OM76135E_(EE)
■Vehicle customization
●When the speed linked door locking function and the shift position linked door locking
function are both on, the door lock operates as follows.
• When shifting the shift position to any position other than P, all the doors will be
locked.
• If the vehicle is started with all the door s locked, the speed linked door locking func-
tion would not operate.
• If the vehicle is started with any door unlocked, the speed linked door locking func- tion will operate.
●When the smart entry & start system is off, smart door unlocking cannot be custom-
ized.
●When the doors remain closed after unlocking the doors and the automatic door lock
function is activated, the signals will be generated in accordance with the Operation
signal (buzzer) and the Operation signal (emergency flashers) settings.
■In the following situations, customize mode in which the settings can be changed
through the multi-information display will automatically be turned off.
●A warning message appears after the customize mode screen is displayed.
●The power switch is turned off.
●The vehicle begins to move while the customize mode screen is displayed.
WA R N I N G
■Cautions during customization
As the hybrid system needs to be operating during customization, ensure that the vehi-
cle is parked in a place with adequate ventilation. In a closed area such as a garage,
exhaust gases including harmful carbon monoxide (CO) may collect and enter the
vehicle. This may lead to death or a serious health hazard.
NOTICE
■During customization
To prevent 12-volt battery discharge, ensure that the hybrid system is operating while
customizing features.
CT200h_OM_OM76135E_(EE).book Page 598 Friday, May 30, 2014 1 1:14 AM

610Alphabetical index
CT200h_OM_OM76135E_(EE)
Do-it-yourself maintenance .............450
DoorsAutomatic door locking and unlocking system.............................. 122
Back door................................................124
Door glasses ........................................... 161
Door lock .................................................. 119
Open door warning light ................517
Outside rear view mirrors...............157
Rear door child-protectors ............ 122
Side doors ................................................ 119
Double locking system ..........................84
Drive information.......................... 101, 104
Driver’s seat belt reminder
light ........................................................... 517
Driver’s seat position memory ..........147
Driving Break-in tips .......................................... 169
Correct posture .................................... 36
Driving mode select switch .......... 237
Hybrid vehicle driving tips ..............251
Procedures ............................................ 168
Winter drive tips................................. 254
Driving position memory .....................147
Memory recall function ....................149
Dynamic radar cruise control
Function ................................................. 208
Warning message.................. 522, 531 ECO lamp .................................................. 99
Electric motor
Location .....................................................70
Specification........................................ 580
Electric Power Steering (EPS)
Function.................................................. 238
Warning light.........................................516
Electronic key Battery-saving function ....................130
If the electronic key does not operate properly....................565
Replacing the battery ...................... 483
Emergency brake signal.................... 239
Emergency flashers.............................508
Emergency, in case of
If a warning buzzer sounds ............515
If a warning light turns on ................515
If a warning message is displayed .............................................. 521
If the 12-volt battery is discharged ........................................ 567
If the electronic key does not operate properly....................565
If the hybrid system will not start ............................................... 563
If you have a flat tire............... 539, 551
If you lose your keys ...................116, 118
If you think something is wrong..................................................... 514E
CT200h_OM_OM76135E_(EE).book Page 610 Friday, May 30, 2014 1 1:14 AM