2014 Lexus CT200h lock

571-1. For safe use
1
CT200h_OM_OM76135E_(EE)
For safety and security
Key of letters inserted in the above table:
U: Suitable for “universal” category child restraint system approved for the use in this mass group.
UF: Suitable for forward facing “universal” category child restraint system approved for the use in this mass group.
L1: Suitable for “LEXUS G 0+, BABY SAFE PLUS” (0 to 13 kg [0 to 28 lb.]) approved for the use in this mass group.
L2: Suitable for “LEXUS G 0+, BABY SAFE PLUS with SEAT BELT FIXA- TION, BASE PLATFORM” (0 to 13 kg [0 to 28 lb.]) approved for the use in
this mass group.
L3: Suitable for “LEXUS DUO+” (without ISOFIX, 9 to 18 kg [20 to 39 lb.]) approved for the use in this mass group.
L4: Suitable for “LEXUS KID” (15 to 36 kg [34 to 79 lb.]) approved for the use in this mass group.
L5: Suitable for “LEXUS KIDFIX” (15 to 36 kg [34 to 79 lb.]) approved for the use in this mass group.
X: Not suitable seat position for children in this mass group.
*1: When you use a child restraint system in this position, adjust the seat back and fix it at
the most upright lock position.
*2: When you use a child restraint system in this position, remove the head restraint.
Other child restraint system which is different from the system mentioned in the
table can be used.
But the suitability of the systems must be carefully checked with the child
restraint system manufacturer concerned and the seller of those seats.
CT200h_OM_OM76135E_(EE).book Page 57 Friday, May 30, 2014 11 :14 AM

611-1. For safe use
1
For safety and security
CT200h_OM_OM76135E_(EE)
Installing child restraints
Seat belts (An ELR belt requires a lock-
ing clip.)
ISOFIX rigid anchors (ISOFIX child
restraint system)
Lower anchors are provided for the out-
board rear seats. (Buttons displaying the
location of the anchors are attached to
the seats.)
Anchor brackets (for top strap)
An anchor bracket is provided for out-
board rear seats.
Follow the child restraint system manufacturer’s instructions. Firmly secure
child restraints to the seats using a seat belt or ISOFIX rigid anchors. Attach
the top strap when installing a child restraint.
CT200h_OM_OM76135E_(EE).book Page 61 Friday, May 30, 2014 11 :14 AM

621-1. For safe use
CT200h_OM_OM76135E_(EE)
■Rear facing  Baby seat/child seat
Place the child restraint system
on the rear seat facing the rear of
the vehicle.
Run the seat belt through the
child restraint system and insert
the plate into the buckle. Make
sure that the belt is not twisted.
Keep the lap portion of the belt
tight.
Install a locking clip near the tab
of the lap and shoulder belt by
inserting the lap and shoulder
webbing through the recesses of
locking clip.
■Forward-facing  Child seat
Adjust the head restraint to the
upmost position.
Installing child restraints using a seat belt
1
2
3
1
CT200h_OM_OM76135E_(EE).book Page 62 Friday, May 30, 2014 11 :14 AM

631-1. For safe use
1
CT200h_OM_OM76135E_(EE)
For safety and security
Place the child restraint system
on the seat facing the front of the
vehicle.
Run the seat belt through the
child restraint system and insert
the plate into the buckle. Make
sure that the belt is not twisted.
Keep the lap portion of the belt
tight.
Install a locking clip near the tab
of the lap and shoulder belt by
inserting the lap and shoulder
webbing through the recesses of
locking clip.
■Junior seat Place the child restraint system
on the seat facing the front of the
vehicle.
2
3
4
1
CT200h_OM_OM76135E_(EE).book Page 63 Friday, May 30, 2014 11 :14 AM

661-1. For safe use
CT200h_OM_OM76135E_(EE)
Secure the child restraint system
using the seat belt or ISOFIX rigid
anchors.
Open the anchor bracket cover,
latch the hook onto the anchor
bracket and tighten the top strap.
Make sure the top strap is securely
latched.
■When installing a child restraint system
You need a locking clip to install the child restraint system. Follow the instructions pro-
vided by the manufacturer of the system. If yo ur child restraint system does not provide a
locking clip, you can purchase the following item from any authorized Lexus dealer or
repairer, or another duly qualified and eq uipped professional: Locking clip for child
restraint system
(Part No. 73119-22010)
2
3
WA R N I N G
■When installing a child restraint system
Follow the directions given in the child restra int system installation manual and fix the
child restraint system securely in place.
If the child restraint system is not correctly fixed in place, the child or other passengers
may be seriously injured or even killed in the event of sudden braking, sudden swerving
or an accident.
●If the driver’s seat interferes with the child
restraint system and prevents it from being
attached correctly, attach the child restraint
system to the right-hand rear seat (left-hand
drive vehicles) or the left-hand rear seat
(right-hand drive vehicles).
●Adjust the front passenge r seat so that it does
not interfere with the child restraint system.
CT200h_OM_OM76135E_(EE).book Page 66 Friday, May 30, 2014 11 :14 AM

681-1. For safe use
CT200h_OM_OM76135E_(EE)
WA R N I N G
■When installing a child restraint system
●If child restraint system regulations exist in the country where you reside, please con-
tact any authorized Lexus dealer or repair er, or another duly qualified and equipped
professional for the child restraint system installation.
●When a junior seat is installed, always en sure that the shoulder belt is positioned
across the center of the child’s shoulder. The belt should be kept away from the child’s
neck, but not so that it could fall off the child’s shoulder. Failing to do so may result in
death or serious injury in the event of su dden braking, sudden swerving or an acci-
dent.
●Ensure that the belt and plate are securely locked and the seat belt is not twisted.
●Shake the child restraint system left and right, and forward and backward to ensure
that it has been securely installed.
●After securing a child restraint system, never adjust the seat.
●Follow all installation instructions provided by the child restraint system manufacturer.
■To correctly attach a child restraint system to the anchors
When using the lower anchors, be sure that there are no foreign objects around the
anchors and that the seat belt is not caught behind the child restraint system. Make sure
the child restraint system is securely attached, or it may cause death or serious injury to
the child or other passengers in the event of a sudden stop, sudden swerve or accident.
CT200h_OM_OM76135E_(EE).book Page 68 Friday, May 30, 2014 11 :14 AM

751-2. Hybrid system
1
CT200h_OM_OM76135E_(EE)
For safety and security
There is an air intake vent on the side of
the rear right seatback for the purpose
of cooling the hybrid battery (traction
battery). If the vent becomes blocked,
the hybrid battery may overheat, lead-
ing to a reduction in hybrid battery out-
put.
When a certain level of impact is detected by the impact sensor, the emergency
shut off system blocks the high voltage current and stops the fuel pump to mini-
mize the risk of electrocution and fuel leakage. If the emergency shut off system
activates, your vehicle will not restart. To restart the hybrid system, contact any
authorized Lexus dealer or repairer, or another duly qualified and equipped pro-
fessional.
A message is automatically displayed when a malfunction occurs in the hybrid
system or an improper operation is attempted.
If a warning message is shown on the
multi-information display, read the
message and follow the instructions.
( →P. 5 2 1 )
Hybrid battery (traction battery) air vent
Emergency shut off system
Hybrid warning message
CT200h_OM_OM76135E_(EE).book Page 75 Friday, May 30, 2014 11 :14 AM

841-3. Theft deterrent system
CT200h_OM_OM76135E_(EE)
Double locking system∗
Vehicles employing this system have
labels on the window glass of both front
doors.
Turn the power switch off, have all the passengers exit the vehicle and ensure that
all the doors are closed.
Using the entry function:
Touch the sensor area on the outside door handle twice within 5 seconds.
Using the wireless remote control:
Press
twice within 5 seconds.
Using the entry function: Hold the outside door handle.
Using the wireless remote control: Press .
∗: If equipped
Unauthorized access to the vehicle is prevented by disabling the door unlock-
ing function from both the interior and exterior of the vehicle.
Setting the double locking system
Canceling the double locking system
WA R N I N G
■Double locking system precaution
Never activate the double locking system when there are people in the vehicle,
because all the doors cannot be opened from inside the vehicle.
CT200h_OM_OM76135E_(EE).book Page 84 Friday, May 30, 2014 11 :14 AM