2014 Lancia Ypsilon ad blue

STEERING WHEEL CONTROLS(for versions/markets, where provided)Button Functions Method
AudioMute on/off (Radio mode) or Pause
function (MP3 or Media Player mode only
withBlue&Me
™
)Short button press
+Increasing volume Button press
-Decreasing volume Button press
SRCSelection of Radio frequency range (FM1,
FM2, FMT, FMA, MW1, MW2) and listening
sources; Radio, MP3 or Media Player (only
withBlue&Me
™
) /AUX (only with
Blue&Me
™
, for versions/markets, where
provided)Button press
NOTE: Starting from the FM or AM source set
on the radio (e.g. FM1 or MW1), if you cycle
through the audio sources using the SRC
button (stopping on a source other than radio)
when the radio source is selected (FM or AM)
using the commands on the radio panel, the
radio always switches to the last radio source
(FMA or MW2).
SRC
fig. 2
L0F0049
276
SOUND-SYSTEM

Audio section
❒Mute/Pause function;
❒Soft-Mute function;
❒Loudness function (excluding versions with
360° HI-FI MUSIC system);
❒7 band graphic equalizer (excluding versions
with 360° HI-FI MUSIC system);
❒Separate bass/treble adjustment;
❒Right/left channel balance.
Media Player section (only with Blue&Me™)
For the Media Player functions see, the
Blue&Me™ supplement.
AUX section (only with Blue&Me™)
(for versions/markets, where provided)
❒AUX source selection;
❒AUX Offset function: alignment of the portable
device volume with that of the other sources;
❒Portable player playback.
FUNCTIONS AND ADJUSTMENTSSWITCHING ON THE CAR RADIO
The car radio comes on when the button/knob
(ON/OFF) is pressed briefly.
When the car radio is turned on, the volume is
limited to value 20 if it was set to a higher value
when previously used or to value 5 if it was
previously set to value 0 or to Mute/Pause. The
previously set value is maintained in all other
cases.
When the radio is switched on with the key
extracted from the ignition, it switches off
automatically after about 20 minutes. After the
radio has switched itself off automatically it can be
turned on for a further 20 minutes by pressing the(ON/OFF) button/knob.
SWITCHING OFF THE CAR RADIO
Briefly press the
(ON/OFF) button/knob.
SELECTING THE RADIO FUNCTIONS
By pressing the FM AS button quickly and
repeatedly, the following audio sources can be
selected cyclically:
❒TUNER (“FM1”, “FM2”, “FMA”).
By pressing the AM button briefly and repeatedly,
the following audio sources can be selected
cyclically:
❒TUNER ("MW1", "MW2").
279
SOUND-SYSTEM

AUDIO SETTINGS
The functions in the audio menu differ according
to the activated source: AM/FM/CD/Media Player
(only withBlue&Me™) /AUX (only with
Blue&Me™, for versions/markets, where
provided).
Press the
button briefly to change the Audio
functions.
After thebutton is first pressed, the display will
show the bass level value for the source activated
at that time (e.g. in FM mode the display will
show the wording "FM Bass +2").
Use theor
buttons to scroll through the menu
functions. To change the setting of the function
selected use the
or
buttons.
The current status of the function selected will be
shown on the display.
The functions managed by the Menu are:
❒BASS (adjustment of bass tones);
❒TREBLE (adjustment high tones);
❒BALANCE (right/left balance adjustment);
❒FADER (front/back balance adjustment);❒LOUDNESS (excluding versions with 360°
HI-FI MUSIC system) (activation/deactivation
of LOUDNESS function);
❒EQUALIZER (excluding versions with 360°
HI-FI MUSIC system) (activation and selection
of equalizer factory settings);
❒USER EQUALISER (excluding versions with
360° HI-FI MUSIC system) (personalised
equaliser settings).
TONE ADJUSTMENT (bass/treble)
Proceed as follows:
❒Use
or
buttons to set the “Bass” or “Treble”
in the AUDIO menu;
❒press theor
button to increase/decrease the
bass or treble.
By pressing the buttons briefly, the levels will
change progressively. By pressing them down
longer, the levels will change quickly.
281
SOUND-SYSTEM

PHONE FUNCTION
(telephone volume setting)
(only with Blue&Me™ system)
With Speech volume function present in Menu
This function makes it possible to adjust (settings
from 1 to 40), by turning the
(ON/OFF)
knob/button or pressing the/
buttons, or
exclude (OFF setting) the volume of the Telephone
and of theBlue&Me™ (except the Media Player
function).
The display shows the current function status:
❒“Speech Off”: function inactive.
❒“Speech volume 23”: function activated with
volume setting 23.
With Speech volume function
not present in Menu
When a phone call is received, the audio passes to
the car’s audio system through the radio.
The incoming telephone sound always arrives at a
fixed volume, but it can be adjusted during the
conversation using the
ON/OFF button/knob.
If, while using theBlue&Me™, the phone call
volume is changed, it is shown on the radio
display, memorised and kept for all following
phone calls until the engine is switched off.With the RADIO ON VOLUME function activated,
when the engine is started again:
❒if the radio was switched off with aBlue&Me™
volume lower than 12, theBlue&Me™ volume
will be set to 12 automatically for the next
phone call;
❒if the radio was switched off with aBlue&Me™
volume higher than 2 , theBlue&Me™ volume
will be set to 2 automatically for the next
phone call;
❒if the radio was switched off with aBlue&Me™
volume between 12 and 2 , theBlue&Me™
volume for the next phone call will be that set
previously by the user.
If, on the other hand, the RADIO ON VOLUME
function is inactive, the radio keeps the last
setting.
288
SOUND-SYSTEM
5
5 5

SYSTEM RESET function
This function is used to restore all settings to the
factory values.
The options are:
❒NO: no restore intervention;
❒YES: the default parameters will be restored.
The display will show "Resetting" during this
operation. At the end of the operation, the
source does not change and the previous
situation will be displayed.PHONE SET-UP
If a hands-free kit is installed on the car, when
there is an incoming phone call the radio audio
will be connected to the telephone output.
The incoming telephone sound always arrives at a
fixed volume, but it can be adjusted during the
conversation using the
ON/OFF button/knob.
The fixed telephone audio volume can be adjusted
using the “SPEECH VOLUME” function in the
Menu (where the function is provided). The word
"PHONE" will appear on the display during the
deactivation of the audio for the phone call.
If there is no “SPEECH VOLUME” function in the
menu, volume adjustment is made in the same
way as it does withBlue&Me™.
290
SOUND-SYSTEM

Car radio passport
This document certifies ownership of the radio.
The car radio passport shows the radio model,
serial number and secret code.
NoteKeep this car radio passport in a safe place
so that you can give the information to the
relevant authorities if the car radio is stolen.
In case of loss of the car radio passport, contact
the Lancia Dealership, taking an ID document and
the car ownership documents.
RADIO (TUNER)INTRODUCTION
When the radio is switched on, the last function
selected before it was switched off is activated:
Radio, CD, CD MP3 or Media Player (only with
Blue&Me™) or AUX (only withBlue&Me™, for
versions/markets, where provided).
To select the Radio function when another audio
source is being listened to, briefly press the FM AS
or AM buttons depending on the desired band.
Once the Radio mode has been activated, the
display will show the name (RDS stations only)
and the frequency of the selected radio station, the
frequency band selected (e.g. FM1) and the
preselect button number (e.g. P1).
292
SOUND-SYSTEM

STRUCTURE OF THE FOLDERS
The radio with MP3 player:
❒recognises only the folders that contain MP3
format files;
❒if the MP3 files on a CD-ROM are structured in
"sub-folders", their structure is compressed to a
single level structure where the "sub-folders" are
taken to the level of the main folders.
AUX (only with the Blue&Me™ system)(for versions/markets, where provided)
INTRODUCTION
This chapter describes the variants regarding the
operation of the AUX source: as far as the
operation of the radio is concerned, refer to the
description in the "Functions and Adjustments"
chapter.
AUX MODE
To activate the AUX source, press the MEDIA
button or the SRC control on the steering wheel
several times till the corresponding source is
displayed.
301
SOUND-SYSTEM

IMPORTANT
the functions of the device connected with the
AUX socket are directly managed by the device
itself; it is not possible to change
track/folder/playlist with radio or steering wheel
controls.
Do not leave the cable of your portable player
connected with the AUX socket after the
disconnection, to avoid possible hisses from the
speakers.
NOTE The AUX socket is not incorporated in the
radio. For its position, refer to theBlue&Me™
Supplement and its Quick Guide.
TROUBLESHOOTINGGENERAL
Low volume
The Fader function should be adjusted only to the
values "F" (front) to prevent a reduction in radio
output power and the muting of the volume if the
Fader level adjustment is equal to R+9.
Source cannot be selected
Nothing has been loaded.
Load the CD or CD MP3 to be played.
302
SOUND-SYSTEM