2014 KIA Optima engine

[x] Cancel search: engine

Page 277 of 479

KIA Optima 2014 3.G Owners Manual 55
Driving your vehicle
WARNING - Fire risk
When you intend to park or stop
the vehicle with the engine on,
be careful not to depress the
accelerator pedal for a long
period of time. It may overheat
t

Page 278 of 479

KIA Optima 2014 3.G Owners Manual Driving your vehicle
65
Illuminated ignition switch 
(if equipped)
Whenever a front door is opened, the
ignition switch will illuminate for your
convenience, provided the ignition
switch is not in the

Page 279 of 479

KIA Optima 2014 3.G Owners Manual 57
Driving your vehicle
START
Turn the ignition switch to the START
position to start the engine. The
engine will crank until you release
the key; then it returns to the ON
position. The brake warning

Page 280 of 479

KIA Optima 2014 3.G Owners Manual Driving your vehicle
85
Illuminated ENGINE
START/STOP button
Whenever the front door is opened,
the ENGINE START/STOP button
will illuminate for your convenience.
The light will go off after about 30

Page 281 of 479

KIA Optima 2014 3.G Owners Manual 59
Driving your vehicle
ACC(Accessory)
Press the ENGINE START/STOP
button while it is in the OFF position
without depressing the brake pedal.
The steering wheel unlocks and
electrical accessories are

Page 282 of 479

KIA Optima 2014 3.G Owners Manual Driving your vehicle
10
5
If you leave the ENGINE START/
STOP button in the ACC or ON posi-
tion for a long time, the battery will
discharge.
WARNING - Starting 
vehicle
• Never press the ENGINE STA

Page 283 of 479

KIA Optima 2014 3.G Owners Manual 511
Driving your vehicle
Starting the engine with an
ignition key (if equipped) 
1.Make sure the parking brake isapplied.
2. Automatic Transaxle  - Place the
transaxle shift lever in P (Park).
Depress

Page 284 of 479

KIA Optima 2014 3.G Owners Manual Driving your vehicle
12
5
Starting the engine with a
smart key (if equipped)
1.Carry the smart key or leave it
inside the vehicle.
2.Make sure the parking brake is firmly applied
3.Place the transaxle