2014 KIA OPTIMA HYBRID warning light

19
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED REMINDERS:


OAs a bulb check, the EPB malfunction indicator will illuminate for approximately 3 seconds when the
ignition switch is turned ON


OIf the warning light does not illuminate temporarily, or continues to remain lit, take your vehicle to an
authorized Kia dealer and have the system checked


OThe EPB should not be operated while the vehicle is moving, unless there is an emergency situation


OA click or electric brake motor sound may be heard while operating or releasing the EPB, but these
conditions are normal and indicate that the EPB is functioning properly
Electric Parking Brake (EPB)*The Electric Parking Brake (EPB) system utilizes an electric
motor to engage the parking brake.
Applying the Parking Brake
Depress the brake pedal and pull up the EPB switch
A.
Ensure that the indicator light
is illuminated on the
instrument cluster.
Releasing the Parking Brake
The EPB will automatically release when
the shifter is placed in Reverse or Drive .
To release EPB manually, depress the
brake pedal, then press the EPB switch
A,
with the ignition switch in the ON position.
Ensure that the indicator light
is OFF.


O


OWhen leaving your keys with parking lot attendants or valet, make sure to inform them how to
operate the EPB


OIf parked on a steep incline, pull up the EPB switch for more than 3 seconds for a firmer EPB
application
AB


Electric Parking Break
(EPB)/AUTO HOLD Video

To view a video on your
mobile device, snap this
QR code or visit the listed
website.
Refer to page 2 for more
information.
QR CODE
www.KuTechVideos.com/tf23/2014


O
Pull up and hold EPB switch again to increase brake pressure if
parked on a decline or incline.
QUICK TIPSQUICK TIPS
AUTO HOLD*AUTO HOLD temporarily maintains the
vehicle at a standstill even if the brake
pedal is released. AUTO HOLD can be
turned ON/OFF using the AUTO HOLD
switch
B on the driver’s panel. Before
AUTO HOLD will operate, the driver’s
door, engine hood and trunk must be
closed and the driver’s seat belt must
be fastened.
The AUTO HOLD indicator has four
states:
White: Standby - With vehicle at a
standstill, and AUTO HOLD switch
B
turned ON, the indicator will illuminate
white. While driving the vehicle (vehicle
is not at a standstill), the AUTO HOLD
indicator will remain white.
Green: Engaged - When coming to
a complete stop by depressing the
brake pedal, the AUTO HOLD indicator
changes from white to green.
OFF (not illuminated): The indicator
will turn OFF when the AUTO HOLD
switch
B is manually turned OFF or
when the EPB is manually turned ON.
Ye l l o w : Malfunction - When the
indicator is illuminated yellow, there
may be a system malfunction. Take
your vehicle to a local Kia dealer.
Refer to pages 3-4 for location of instrument
cluster indicators.
DRIVER’S PANEL

37
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED


O


OYou can reprogram a single HomeLink ® button by repeating Step 2


OErasing programmed buttons will delete all trained transmitters
QUICK TIPS
The Auto-Dimming Rearview Mirror is designed to reduce
glare from a vehicle’s headlights visible in the rear and also
connect up to three electronic transmitters in one location.
To turn automatic dimming ON or OFF, press button
F
HomeLink® with Auto-Dimming
Rearview Mirror*
How to Sync Transmitter with HomeLink®*
Erasing programmed buttons:
A HomeLink® button B HomeLink® button C Indicator lightD HomeLink® button

E Glare detection sensor F Automatic dimming ON/OFF G Compass control buttonIf programming for the first time, begin with Step 1
(repeating this step will delete all information).
To program non-rolling and rolling code garage door
openers and other devices:
1. Press and hold the left
A and center

D buttons
simultaneously until the indicator light C begins to
flash (to reprogram buttons, skip this step)
2. Press and hold the desired button
A B D and hold
the button on the transmitter while it is approximately
1 to 3 inches away from the mirror. The HomeLink®
Indicator light

C will flash rapidly once the frequency
signal has been successfully programmed
To finish programming rolling code garage door openers,
complete these steps:
3. Locate the “learn” or “smart ” button on the garage
door’s motor head unit. Press and release the button
and complete Step 4 within 30 seconds
4. Firmly press and release the programmed HomeLink®
button up to three times
Press and hold the left

A and center
D buttons
simultaneously for approximately 20 seconds,
and then release both buttons within 30 seconds.Operating HomeLink®:
Press one of the programmed HomeLink® buttons.
REMINDER: Mirror indicator light
C will illuminate when automatic
dimming is ON.
If your garage door opener was manufactured in 2011 or later, and you’re unable to program your vehicle’s HomeLink
® system, you may need to
purchase a HomeLink
® Repeater Kit. For more information, go to www.HomeLink.com or call (800) 355-3515 .
A
B
C
D
E
F
G
OTHER KEY FEATURES

39
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED Panoramic Sunroof Operation*The sunroof and sunshade operation is controlled through a
multidirectional switch/lever, and the ignition needs to be in the ON
position to operate the sunroof/sunshade.
Slide the Sunshade and Sunroof:
Auto Open: Slide lever
A backward to the farthest position and release.
Auto Close: Slide the lever
A forward to the farthest position and
release.
Slide the Sunshade:
Auto Open: Slide the lever A backward to the first detent position.
Auto Close: Slide the lever A forward to the farthest position.
Slide the Sunroof (with Sunshade open):
Auto Open: Slide the lever A backward and release.
Auto Close: Slide the lever A forward to the first detent position or pull
the lever downward.
Tilt the Sunroof:
Raise: Push lever
A upward.
Lower: Pull lever
A downward.
Auto Close Sunroof and Sunshade: Slide the lever
A forward to the
farthest position.
SunvisorUse the Sunvisor to shield direct light through
the front or side windows.REMINDER: Sunvisor may not shield all direct light.
REMINDER: The Sunvisor may impair visibility if not
adjusted properly.
To stop the sunroof at any position, slide lever quickly in any direction.
QUICK TIPS
OTHER KEY FEATURES

OPTIMA HYBRID
FEATURES & FUNCTIONS GUIDE
40
*IF EQUIPPED
Rear-Camera Display*The Rear-Camera Display system is not a safety device.
It is a supplemental system that displays the view
behind the vehicle through the Navigation System* or
UVO* System screen while the vehicle is in Reverse.
The Rear- Camera Display activates when the:
1. ENGINE START/STOP* button is in the ON position
(green light)
2. Gear Shift Lever is in the R (Reverse) position
Warning! Check your surroundings for safety
REMINDER: The Rear-Camera Display is not a substitute for proper and
safe backing-up procedures. Always drive safely and use caution when
backing up. The Rear-Camera Display may not detect every object
behind the vehicle.
REMINDER: UVO System — While camera is active, only the volume
controls on the Audio System can be operated.
REMINDER: Navigation System — While camera is active, only the Audio
System can be operated on the Steering Wheel and Audio Control Unit.
Navigation features are disabled. REMINDER: If the vehicle is moving at speeds over 3 mph, the system
may not activate correctly.
REMINDER: When more than two objects are sensed at the same time,
the closest one will be recognized first.
REMINDER: The Back-Up Warning System is not a substitute for proper
and safe backing-up procedures. Always drive safely and use caution
when backing up. The Back-Up Warning System may not detect every
object behind the vehicle.
The Back-Up Warning System is not a safety device. The
Back-Up Warning System is a supplemental system that
assists the driver by chiming if any object is detected
within the sensing area to the rear and side of the vehicle
when backing up. When the ignition is ON, the system is
activated. Back-Up Warning System (Rear
Parking Assist System)*OTHER KEY FEATURES

41
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
CLICK!
Fuel Cap / Malfunction Indicator (Check Engine Light)Tighten for ONE CLICK to prevent Malfunction Indicator

from illuminating.
REMINDER: The Fuel Filler Door Release button is located on the lower part
of the driver’s door panel.
Kia One-Click
Fuel Cap Video
To view a video on your
mobile device, snap this
QR Code or visit the
listed website.
Refer to page 2 for more
information.
Kia Tire Mobility
Kit Video
QR CODE
www.KuTechVideos.com/tf23/2014
Tire Mobility Kit*The Tire Mobility Kit enables you to quickly and effectively seal certain types of tire damage,
enabling you to drive to the nearest service center. As a result, not all types of tire damage will
require towing.
For operational information, please refer to section 6
of your Owner’s Manual.A Sealant BottleB Compressor
A
B


O


OThe Tire Mobility Kit is a temporary fix and is to be used for one tire only; the tire should be
inspected as soon as possible


OThe kit should only be used for sealing/inflating passenger car tires; do not use for inflating any
other type of tires


OSome damaged tires cannot be sealed completely; do not use the kit if a tire is damaged beyond
repair
QUICK TIPS
REMINDER: After tire is properly
sealed, drive cautiously for no more
than a maximum speed of 50 mph and
a distance of up to 120 miles.
www.KuTechVideos.com/tf23/2014
OTHER KEY FEATURES

OPTIMA HYBRID
FEATURES & FUNCTIONS GUIDE
44
*IF EQUIPPED
SAFETY
PRESS
REMINDER: For maximum protection, always wear your seat belt.Safety BeltsTo properly fasten your safety belts:
1. Insert the tongue belt plate
A into the buckle
B until it clicks
2 . Position the lap portion of the belt across your lap as LOW
ON THE HIPS as possible
C. Adjust the belt to a SNUG FIT
by pulling up on the shoulder portion
D.
Safety Belt Retractor Inertial Locks

O
Inertial locks allow lap/shoulder safety belts to remain
unlocked during normal vehicle operation for freedom of
movement and increased comfort


O
During a STRONG STOP, SUDDEN TURN OR CERTAIN
COLLISIONS, safety belt retractors will automatically
lock the belts
D
C
A
B
For more detailed information regarding your vehicle’s safety belts,
please refer to your Owner’s Manual and the separate brochure titled
“Understanding Your Safety Belt & Supplemental Restraint System.”
The Safety Belt warning chime operates for driver’s seat only.
QUICK TIPS
ODS detects the presence of
the front passenger.
Depending on the situation
and type of accident,
the system may:


ODeploy airbag (Adult)


ONot deploy the airbag
(Unoccupied)
If the system determines that
the airbag should not
be deployed, the
“PASSENGER AIR BAG OFF”
light will illuminate.Occupant Detection
System (ODS) /
PASSENGER AIR BAG
OFF Indicator


Kia Occupant Detection
System Video

To view a video on your
mobile device, snap this
QR Code or visit the
listed website.
Refer to page 2 for more
information.www.KuTechVideos.com/tf23/2014
QR CODE
Please refer to your Owner’s Manual and the separate brochure titled
“ Understanding Your Safety Belt & Supplemental Restraint System” for more
detailed information regarding your vehicle’s airbags.
PASSENGER
PASSENGER
AIR BAG