2014 KIA OPTIMA HYBRID warning

13
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED Navigation System Display*When equipped, Optima Hybrid’s Navigation screen also provides information on
economical operation and hybrid system modes, including ECODynamics. To enter the
Hybrid display mode, press the Settings key on the audio control unit. Press the on-screen
INFO/UVO icon, then press HYBRID.
Energy Flow - Displays the current flow of
power between the Optima Hybrid’s main
powertrain components. It’s similar to
the Energy Flow Screen in the LCD in the
instrument cluster. Car Mode - The more economically you
drive, the more the ECO Level bars fill
up. As you continue to maintain high fuel
efficiency, leaves will appear and begin to
fly off the vehicle.
Average Fuel Economy - Displays the
average fuel economy over the duration
of a trip.
PM
ECO Level
50
40
30
20
10
MPG
NOW 30 min10 min 20 min
Average
Fuel Economy
13.4 MPGElectric
Gasoline
Average
Fuel Economy
PM

Optima Hybrid
Navigation System
ECODynamics Display
Video
To view a video on your
mobile device, snap this
QR Code or visit the
listed website.
Refer to page 2 for more
information.
QR CODE
www.KuTechVideos.com/tf23/2014
Earth Mode - The more economically you
drive, the more the ECO Level bars fill up,
and the earth becomes more blue. As you
continue to maintain high fuel efficiency,
the earth will start growing leaves.
PM
HYBRID SYSTEM DISPLAYS

15
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED ENGINE START/STOP Button
2
AB
1To start the engine: 1 Depress the brake pedal2 Press the ENGINE START/STOP button while in Park3 The vehicle is ready to be driven when the READY light illuminates
To turn the vehicle OFF, press the ENGINE START/STOP button.
To use the ENGINE START/STOP button, you must have the Smart Key* fob on your person
or inserted in the fob holder.To use electrical accessories:
ACC position

O

O
O$!*
O%*
O0$!
O
O,+/%0%+*
O
(*+
O(%#$0
)
O*
O3%0$+10
O !,.!//%*#
O0$!
O.'!
O,! (

O,.!//
O0$!
O 
O

%
O100+*
O+*!
O
(+.*#!
O(%#$0
O
A)
ON position


O
O$!*
O(.! 5
O%*
O0$!
O

O,+/%0%+*
O
(+.*#!
O(%#$0
O
A) and without depressing the brake pedal, press the ENGINE START/STOP button again
(green light
B)

O

O
O$!*
O%*
O0$!
O
O,+/%0%+*
O
(*+
O(%#$0
)
O*
O3%0$+10
O !,.!//%*#
O0$!
O.'!
O,! (

O,.!//
O0$!
O 
O

%
O100+*
O03%!
O
(#.!!*
O(%#$0
O
B)
Keeping the vehicle in ACC or ON position too long can discharge the vehicle’s battery.
QUICK TIPS


Optima Hybrid START/
STOP Button and Smart
Key Video

To view a video on your
mobile device, snap this
QR Code or visit the
listed website.
Refer to page 2 for more
information.
QR CODEwww.KuTechVideos.com/tf23/2014
REMINDER: In an emergency situation while the vehicle is in motion, you are able to turn the engine off
and to the ACC position by pressing the ENGINE START/ STOP button for more than 2 seconds or 3 times
successively within 3 seconds.
0 6
3
DRIVER’S PANEL

17
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED Electric Folding Mirrors*

D Toggle left or right to select mirror. Then press arrows
to adjust mirror position. To both fold and unfold the outside
rearview mirror, press the folding mirror button
E as pictured.
REMINDER: To lock position of mirrors, toggle switch to the neutral (center)
position.
REMINDER: To automatically fold mirrors when exiting vehicle, press the LOCK
button twice on the Smart Key.Automatic Door Lock/Unlock*

When the gear shift is moved in to or out of P (PARK),
all doors will lock/unlock.
Power/Heated Outside Mirrors*Mirror heaters controlled with Rear Defroster.A Pull/Press to operate Windows Auto-Up/DownB Press to Unlock/Lock All DoorsC Press to disable Rear Passenger Windows
A
B
D
C
E
Power Windows, Window Lock & Central Door Lock


O
Auto Door Unlock/Lock will engage when gear shift is moved in to or out
of the P (Park) position.
QUICK TIPS
DRIVER’S PANEL

OPTIMA HYBRID
FEATURES & FUNCTIONS GUIDE
18
*IF EQUIPPED
Blind Spot Detection / Lane Change Assist
1st-stage alert: When another vehicle is detected within the
BSD System boundary, a yellow light will illuminate on the
outside rearview mirrors.
2nd-stage alert: When 1st-stage alert is on and a turn signal is
turned on, the 2nd-stage alert will sound.
RCTA (Rear Cross Traffic Alert)
When the vehicle is in Reverse and moves backwards from a
parking position, the sensor detects approaching vehicles on
the left or right side.Blind Spot Detection (BSD) System* The BSD system uses radar sensors to help alert the
driver while changing lanes or while in Reverse moving
backwards.
When the BSD button is pressed ON, the BSD indicator
on the button
A
will illuminate. The outside rearview
mirror warning lights will also illuminate for 3 seconds.
The system will become active when the vehicle is
traveling more than 18 mph and will alert the driver if
another vehicle is detected by the radar sensor.
A


Blind Spot Detection
System Video

To view a video on your
mobile device, snap this
QR code or visit the listed
website.
Refer to page 2 for more
information.www.KuTechVideos.com/tf23/2014
REMINDER:


OThe BSD system will not show a warning if the vehicle speed is only 6 mph above the surrounding vehicles


OWhen the BSD is ON and the ignition is cycled to OFF then ON again, the BSD system returns to ON


OThe RCTA feature can be turned OFF/ON in User Settings
For more information on the Blind Spot Detection System, please refer to the Owner’s Manual.
QUICK TIPS
DRIVER’S PANEL
( Buttons are located lef t of the Steering Wheel)

19
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED REMINDERS:


OAs a bulb check, the EPB malfunction indicator will illuminate for approximately 3 seconds when the
ignition switch is turned ON


OIf the warning light does not illuminate temporarily, or continues to remain lit, take your vehicle to an
authorized Kia dealer and have the system checked


OThe EPB should not be operated while the vehicle is moving, unless there is an emergency situation


OA click or electric brake motor sound may be heard while operating or releasing the EPB, but these
conditions are normal and indicate that the EPB is functioning properly
Electric Parking Brake (EPB)*The Electric Parking Brake (EPB) system utilizes an electric
motor to engage the parking brake.
Applying the Parking Brake
Depress the brake pedal and pull up the EPB switch
A.
Ensure that the indicator light
is illuminated on the
instrument cluster.
Releasing the Parking Brake
The EPB will automatically release when
the shifter is placed in Reverse or Drive .
To release EPB manually, depress the
brake pedal, then press the EPB switch
A,
with the ignition switch in the ON position.
Ensure that the indicator light
is OFF.


O


OWhen leaving your keys with parking lot attendants or valet, make sure to inform them how to
operate the EPB


OIf parked on a steep incline, pull up the EPB switch for more than 3 seconds for a firmer EPB
application
AB


Electric Parking Break
(EPB)/AUTO HOLD Video

To view a video on your
mobile device, snap this
QR code or visit the listed
website.
Refer to page 2 for more
information.
QR CODE
www.KuTechVideos.com/tf23/2014


O
Pull up and hold EPB switch again to increase brake pressure if
parked on a decline or incline.
QUICK TIPSQUICK TIPS
AUTO HOLD*AUTO HOLD temporarily maintains the
vehicle at a standstill even if the brake
pedal is released. AUTO HOLD can be
turned ON/OFF using the AUTO HOLD
switch
B on the driver’s panel. Before
AUTO HOLD will operate, the driver’s
door, engine hood and trunk must be
closed and the driver’s seat belt must
be fastened.
The AUTO HOLD indicator has four
states:
White: Standby - With vehicle at a
standstill, and AUTO HOLD switch
B
turned ON, the indicator will illuminate
white. While driving the vehicle (vehicle
is not at a standstill), the AUTO HOLD
indicator will remain white.
Green: Engaged - When coming to
a complete stop by depressing the
brake pedal, the AUTO HOLD indicator
changes from white to green.
OFF (not illuminated): The indicator
will turn OFF when the AUTO HOLD
switch
B is manually turned OFF or
when the EPB is manually turned ON.
Ye l l o w : Malfunction - When the
indicator is illuminated yellow, there
may be a system malfunction. Take
your vehicle to a local Kia dealer.
Refer to pages 3-4 for location of instrument
cluster indicators.
DRIVER’S PANEL

21
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED Windshield Wipers & Washers
MIST: Single wipe
OFF: Wiper off
INT: Intermittent wipe
LO: Slow wipe
HI: Fast wipe Move lever up/down to change
Wiper modes. Rotate lever to adjust Intermittent Wipe Speed.
 

FRONT
Pull to spray and wipe.Faste r
SlowerSTEERING WHEEL CONTROLS

23
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
Cruise Control* Audio Controls*


OCruise Control is designed to function only above 25 mph


OThe Cruise Control system will not activate until the brake
pedal has been depressed at least once after ignition ON or
engine start
QUICK TIPS
A Audio Mode button: Press to cycle through FM1-2 /AM
/SAT 1-3/CD/USB/Aux/iPod®B
Seek/Preset button


O
Radio Mode: Press to advance through Preset Stations.
Press and hold to auto seek


O
CD/USB/iPod® Mode: Press to move TRACK UP/
DOWN. Press & hold to FF/REWC Vo l u m e b u t to n: Press up/down to raise/lower volume D
Mute Audio button: Press to mute all audio
E
Cruise Control ON/OFF button:
Press to turn the Cruise Control ON/OFFF Resume Cruising Speed switch: Resume or increase
cruising speedF Set Cruising Speed switch: Press to set or decrease
cruising speedG Cruise Control Cancel button: To cancel cruise
control setting, do one of the following:

O

O.!//
O0$!
O.'!
O,! (

O

O.!//
O0$!
O

O100+*
O
G
REMINDER: Your vehicle’s steering wheel buttons may differ from those
in the illustrations. See your Owner’s Manual for more details.
REMINDER: Driving while distracted is dangerous and should be
avoided. Drivers should remain attentive to driving and always exercise
caution when using the steering-wheel-mounted controls while driving.
VOL VOL
MUTEMODE
OK
ECO
CRUISECANCEL
RESSET
D
AB
C
E
F
G
Pressing the Audio Mode button for more than 1 second will
turn Audio Mode ON/OFF.
QUICK TIPS
STEERING WHEEL CONTROLS

25
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
Voice Recognition and Phone
Contact Tips
The Kia Voice Recognition System
may have difficulty understanding
some accents or uncommon names.
When using Voice Recognition to
place a call, speak in a moderate
tone, with clear pronunciation.
Help your Bluetooth® Wireless
Technology Voice Recognition
performance by making a few
simple changes to your phone
contacts:


OUse full names vs. short or single-
syllable names (“John Smith”
vs. “Dad,” “Smith Residence” vs.
“Home”)


OAvoid using special characters or
hyphens (@, &, #, /, -, *, +, etc.)


OAvoid using acronyms (“In Case
Emergency” vs. “ICE”)


OSpell words completely, no abbreviations (“Doctor
Goodman” vs. “Dr. Goodman”) Contacts Sync Tips


OIf Contact Sync is set to ON, contacts stored in your phone will
download each time your phone is connected. There may be a delay
before the system is available to place a call


OIf Contact Sync is set to OFF, your phone contacts will download only
at the initial pairing. This allows you to make calls without waiting for
your phone contact list to download
QUICK TIPS
Bluetooth
® Wireless Technology
Pairing a Phone
For instructions on how to pair a phone, refer to the audio
system’s user’s guide or your vehicle’s Quick Start Guide.
During the pairing process, be sure to accept the
connection requests on the phone for phonebook
download and to allow acceptance of all future
Bluetooth
® connection requests.
QUICK TIPS


Voice Recognition
Tips Video

To view a video on your
mobile device, snap this
QR Code or visit the
listed website.
Refer to page 2 for more
information.
QR CODE
www.KuTechVideos.com/tf23/2014
How to Place a Call
When using the voice command feature, wait for the
system BEEP before speaking the command.
There are two options for placing a call:
Standard Audio System


OOption 1: Press the Receive/Place Call button
D
(system will prompt you through call process)


OOption 2: Press the Talk button
C (system will BEEP
to indicate it is ready for call placement). Then say
the command “Call {name}” or “Dial {number}”
UVO System


OOption 1: Press the Receive/Place Call button
D
(displays the phone screen with number keypad)


OOption 2: Press the Talk button
C. Then say the
command “Call {name}” or “Dial {number}”
Navigation System


OOption 1: Press the Receive/Place Call button
D
(displays the phone screen with number keypad)


OOption 2: Press the Talk button
C. Then say the
command "Call Name" or "Dial Number", followed by
phone book name or number
STEERING WHEEL CONTROLS