11
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS.
*IF EQUIPPED AUTO HOLD*AUTO HOLD temporarily maintains the
vehicle at a standstill even if the brake
pedal is released. AUTO HOLD can be
turned ON/OFF using the AUTO HOLD
switch
B on the driver’s panel. Before
AUTO HOLD will operate, the driver’s door,
engine hood and trunk must be closed and
the driver’s seat belt must be fastened.
The AUTO HOLD indicator has four states:
White: Standby - With vehicle at a
standstill, and AUTO HOLD switch
B turned
ON, the indicator will illuminate white.
While driving the vehicle (vehicle is not at
a standstill), the AUTO HOLD indicator will
remain white.
Green: Engaged - When coming to a
complete stop by depressing the brake
pedal, the AUTO HOLD indicator changes
from white to green.
OFF (not illuminated): The indicator will
turn OFF when the AUTO HOLD switch
B
is manually turned OFF or when the EPB is
manually turned ON.
Ye l l o w : Malfunction - When the indicator
is illuminated yellow, there may be a system
malfunction. Take your vehicle to a local Kia
dealer.
Refer to pages 3-4 for location of instrument
cluster indicators.
Electronic Stability Control (ESC) The ESC system is designed to help stabilize the vehicle
during cornering maneuvers. It is a good idea to keep
the ESC turned ON for daily driving whenever possible.
Press ESC button
D to turn ESC OFF/ON.
REMINDER: ESC is active by default at vehicle start-up.
REMINDER: The ESC Indicator Light
in the instrument cluster will
illuminate whenever the ESC is in operation.
Instrument Panel DimmerWith parking/headlights ON, toggle switch
C up or down to adjust display
brightness of the instrument panel illumination.
REMINDER: Door Mood Lamp is a fixed brightness and cannot be adjusted (not to be
confused with Advanced Mood Lighting Speaker).
REMINDER: The Instrument Panel Dimmer does not adjust brightness on the Navigation
System screen, use Navigation setup to adjust brightness on the Navigation SystemHill-Start Assist Control (HAC)HAC helps prevent the vehicle from rolling backward when accelerating
from a stop while on a steep incline.
The HAC automatically activates whether the ESC is OFF or ON but does
NOT activate when the ESC has malfunctioned.REMINDER: The HAC does not operate when the gear shift is in the P (Park) or the N
(Neutral) position.
C
D
• When HAC is active (e.g., accelerating from a stop on an incline), you may
notice that the brakes will momentarily remain engaged after you depress the
accelerator.
• HAC provides a 2 second delay before the vehicle may start rolling backwards
QUICK TIPS
(located on lef t of
Steering Wheel)
DRIVER’S PANEL
29
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS.
*IF EQUIPPED SEATING
Seatback Lumbar Seat forward/
backwardSeat Cushion
Driver Position Memory System*To store a seating position into memory, first place the
shifter into P (Park) while the ignition switch is ON. Then:
1. Adjust the driver’s seat
2. Press the SET button
A on the control panel. System
will beep once
3. Press one of the memory buttons
B within 5 seconds. The
system will beep twice when memory has been stored
4. “Driver (1 or 2) set is memorized” will appear on the
instrument cluster LCD display
Power Adjustable Driver’s Seat*Move/Press controls to adjust Seat forward/backward, Seat Cushion, Seatback or Lumbar
B
C
A
A
B
C
A
SET
1
2
AB
Driver Position Memory
System Video
To view a video on your
mobile device, SNAP this
QR code or visit the listed
website.
Refer to page 2 for more
information.
QR CODE
www.KuTechVideos.com/qf13/2014
