Page 461 of 615

General Information
This device complies with Part 15 of the FCC rules and
RSS 210 of Industry Canada. Operation is subject to the
following conditions:
•This device may not cause harmful interference.
• This device must accept any interference received,
including interference that may cause undesired op-
eration.
The TPM sensors are regulated under one of the follow-
ing licenses:
United States MRXC4W4MA4
Canada 2546A-C4W4MA4
FUEL REQUIREMENTS
6.4L Engine
The 6.4L engine is designed to meet all
emissions regulations and provide excellent
fuel economy and performance when using
high-quality premium unleaded gasoline
with an octane rating of 91 or higher.
Light spark knock at low engine speeds is not harmful to
your engine. However, continued heavy spark knock at
high speeds can cause damage and immediate service is
required. Poor quality gasoline can cause problems such
as hard starting, stalling, and hesitations. If you experi-
ence these symptoms, try another brand of gasoline
before considering service for the vehicle.5
STARTING AND OPERATING 459
Page 463 of 615

E-85 Usage In Non-Flex Fuel Vehicles
Non-Flex Fuel Vehicles (FFV) are compatible with gaso-
line containing 10% ethanol (E10). Gasoline with higher
ethanol content may void the New Vehicle Limited
Warranty.
If a Non-FFV vehicle is inadvertently fueled with E-85
fuel, the engine will have some or all of these symptoms:
•Operate in a lean mode.
• OBD II “Malfunction Indicator Light” on.
• Poor engine performance.
• Poor cold start and cold drivability.
• Increased risk for fuel system component corrosion. To fix a Non-FFV vehicle inadvertently fueled once with
E-85 perform the following:
•
Drain the fuel tank (see your authorized dealer).
• Change the engine oil and oil filter.
• Disconnect and reconnect the battery to reset the
engine controller memory.
More extensive repairs will be required for prolonged
exposure to E-85 fuel.
MMT In Gasoline
Methylcyclopentadienyl Manganese Tricarbonyl (MMT)
is a manganese-containing metallic additive that is
blended into some gasoline to increase octane. Gasoline
blended with MMT provides no performance advantage
beyond gasoline of the same octane number without
5
STARTING AND OPERATING 461
Page 465 of 615

CAUTION!(Continued)
•The use of fuel additives, which are now being
sold as octane enhancers, is not recommended.
Most of these products contain high concentrations
of methanol. Fuel system damage or vehicle perfor-
mance problems resulting from the use of such
fuels or additives is not the responsibility of the
manufacturer.
NOTE: Intentional tampering with the emissions control
system can result in civil penalties being assessed against
you.
Carbon Monoxide Warnings
WARNING!
Carbon monoxide (CO) in exhaust gases is deadly.
Follow the precautions below to prevent carbon mon-
oxide poisoning:
•Do not inhale exhaust gases. They contain carbon
monoxide, a colorless and odorless gas, which can
kill. Never run the engine in a closed area, such as a
garage, and never sit in a parked vehicle with the
engine running for an extended period. If the vehicle
is stopped in an open area with the engine running
for more than a short period, adjust the ventilation
system to force fresh, outside air into the vehicle.
•Guard against carbon monoxide with proper main-
tenance. Have the exhaust system inspected every
time the vehicle is raised. Have any abnormal con-
ditions repaired promptly. Until repaired, drive with
all side windows fully open.
5
STARTING AND OPERATING 463
Page 566 of 615
FLUIDS, LUBRICANTS AND GENUINE PARTS
Engine
ComponentFluid, Lubricant or Genuine Part
Engine Coolant We recommend you use MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile
Formula OAT (Organic Additive Technology) that meets the requirements of
Chrysler Material Standard MS-12106.
Engine Oil For best performance and maximum protection under all types of operating
conditions, the manufacturer only recommends full synthetic engine oils that
meet the American Petroleum Institute (API) categories of SN.
The manufacturer recommends the use of Pennzoil Ultra™ 0W-40 or equivalent
MOPAR® engine oil meeting the requirements of Chrysler Material Standard
MS-12633 for use in all operating temperatures.
Engine Oil Filter We recommend you use MOPAR® Engine Oil Filters.
Spark Plugs We recommend you use MOPAR® Spark Plugs. (Gap 0.043 in [1.1 mm])
Fuel Selection Premium Unleaded 91 Octane Only or Higher.
564 MAINTAINING YOUR VEHICLE
Page 603 of 615

Forward Collision Warning..................223
Four-Way Hazard Flasher ...................484
Freeing A Stuck Vehicle .....................503
Front Axle (Differential) .....................538
Fuel .................................. .459
Adding ............................. .464
Additives ............................ .462
Clean Air ............................ .460
Economy Mode ....................... .398
Ethanol ............................. .460
Gasoline ............................. .459
Gauge .............................. .301
Materials Added ....................... .462
Methanol ............................ .460
Octane Rating ......................... .459
Requirements ......................... .459
Tank Capacity ......................... .563
Fueling ............................... .464
Fuses ................................. .547Garage Door Opener (HomeLink®)
............252
Gasoline, Clean Air ....................... .460
Gasoline (Fuel) .......................... .459
Gasoline, Reformulated .....................460
Gauges Coolant Temperature .....................299
Fuel ................................ .301
Speedometer ......................... .297
Tachometer ........................... .296
Gear Ranges ............................ .401
General Information ...................... .219
Glass Cleaning .......................... .546
Gross Axle Weight Rating ...................471
Gross Vehicle Weight Rating ..................470
GVWR ................................ .468
Hazard Driving Through Flowing, Rising, or Shallow
Standing
Water........................ .412
10
INDEX 601
Page 607 of 615

Monitor, Tire Pressure System................451
Mopar Parts ............................ .514
MTBE/ETBE ........................... .460
Multi-Function Control Lever .................171
New Vehicle Break-In Period .................111
Occupant Restraints ........................49
Occupant Restraints (Sedan) ..................72
Octane Rating, Gasoline (Fuel) ................459
Odometer .............................. .303
Trip ................................ .303
Oil, Engine ............................. .516
Capacity ............................ .563
Change Interval ....................... .516
Checking ............................ .516
Disposal ............................. .518
Filter ............................... .519
Filter Disposal ........................ .518Identification Logo
..................... .517
Materials Added to ..................... .518
Recommendation ...................... .517
Synthetic ............................ .518
Viscosity ............................ .518
Oil Filter, Selection ....................... .519
Older Children And Child Restraints ............89
Onboard Diagnostic System ..................512
Opener, Garage Door (HomeLink®) ............252
Operating Precautions ..................... .512
Operator Manual (Owner’s Manual) .............6
Outside Rearview Mirrors ...................131
Overhead Console ........................ .250
Overheating, Engine ...................... .299
Owner’s Manual (Operator Manual) .............6
Paint Care ............................. .542
Panic Alarm ..............................24
Parking Brake ........................... .415
10
INDEX 605