VEHICLE ACCESS
4
COMFORT ADJUSTMENTS
Luggage compartment
See page 2, item 24.
Luggage compartment opening
1.
Press the release b
utton.
2. Alternatively, press the button on the facia.
Convertible roof operation
DO NOT press the engine START/STOP
b
utton while the roof is operating. Doing so will
cause the system to lose its position memor
y.
DO NOT open the Luggage compartment while
the roof is oper
ating. This will cause the operation
to stop
.
Convertible roof
The vehicle must be stationary with the engine running.
Note: The luggage separator MUST be in the correct
position before the roof will retract. See the Owner’s
Handbook, Convertible roof section.
1.
T
o open, press and hold the REAR of the switch in the
o
verhead console. An audible chime indicates the
star
t of the opening process. The rear windows will
open, the roof will unlatch and star
t to move, and
the front windo
ws will fully lower. When the process is
complete
, another audible chime will be given.
2.
Release the s
witch. 1.
T o close, press and hold the FRONT of the switch.
Once again, an audib le chime will be given. If the
windo
ws have been raised, they will will lower before
the roof mo
ves back into position. When the process
is complete
, another audible chime will be given.
2.
Release the s
witch.
Setting the driving position
Driver’s seat
Set the seat position using the following controls on the
door panel:
1. Cushion length.
2. Lumbar support.
3. Seatback angle.
4. Side bolster adjustment.
5. Seat forwards and back, cushion height and cushion
angle.
Note: Seat heating and cooling controls are accessed via
the Touch screen.
Storing the driving position to memory
When the driver’s seat, steering wheel and door mirrors
are adjusted to the required position, the settings can be
stored.
Press the M button to activate the memory store function.
The red LED will illuminate.
Steering wheel position
See page 2, item 21.
1. With the vehicle stationary, turn the rotary control to
the COLUMN position.
2. With the toggle control, adjust the height and reach of
the steering wheel to the required driving position.
Exit mode
When the rotary control is set to AUTO and the driver’s
door is opened, the steering wheel will move up to
provide greater clearance for exiting. The steering wheel
will remain in this position until the driver’s door is closed
and the ignition is turned on.
Door mirror positions
1. Press the left or right mirror selector.
2. Use the mirror adjuster to set the mirror’s position.
Mirror dip when reversing
Reverse dip can be enabled or disabled via the Touch
screen. From the Home screen, select Vehicle, then
Veh. settings, and then Parking.
Powerfold mirrors
1. Press both buttons simultaneously to fold the
mirrors inward. Press again to unfold. The mirrors can
be programmed to unfold/fold automatically at vehicle
unlock/lock. See your Owner’s Handbook.
DO NOT leave the Smart key inside the Luggage
compartment. The vehicle WILL NOT automatically
unlock if the Smart key is shielded.
DO NOT operate the top while the vehicle is in motion.
Doing so may damage the convertible top
and/or its operating mechanism.
