2014 JAGUAR F TYPE bluetooth

AUDIO AND TOUCH SCREEN
12
AUDIO AND TOUCH SCREEN
13
CD player and portable media
The CD/DVD loading slot, connecting ports for auxiliary devices, iPod and USB storage devices are located inside the center console cubby box.
1. CD/DVD loading slot.
2. CD/DVD eject button.
3. 3.5 mm AUX socket.
4. USB socket.
The CD/DVD player will accommodate one CD or DVD disc at a time but with Stored CD, up to 10 CD’s can be loaded onto the virtual CD store. Use My music/Upload to load discs.
The 3.5mm AUX socket allows extra equipment (e.g. personal stereos MP3 player, hand-held navigation unit, etc.) to be connected to the audio system. Devices connected to the AUX socket are controlled only from the device itself.
When connecting to the USB socket, use the cable supplied with your media device. iPod and USB devices can be operated from the touch screen.
The system will play MP3, WMA, WAV and AAC files from a memory stick or a USB controlled MP3 player or cell phone.
Some MP3 players use proprietary file systems that are not supported by the vehicle system. MP3 players must be set to Removable Device or Mass Storage Device mode (see the manufacturer’s information). Only music files added to the device while in this mode can be played via the vehicle system.
The vehicle system will support USB devices with a storage capacity up to 256GB.
Satellite radio subscription service
Use channel 184 to preview satellite radio. When the preview time expires you will need to subscribe to SIRIUS to enable further satellite reception.
1. Touch to select the satellite bands. Touch the + icon to move through SAT 1, 2 and 3.
2. Use the seek arrows to move up or down to the next or previous channel.
3. Channel information. Select if there is more information than can fit in the display area.
4. Channel presets. Each S AT band has 6 preset soft keys. Touch and hold a soft key to store the current channel. A brief touch will access the stored channel.
5. Select to make personal settings in Options, Channel skip and Parental lock areas.
6. View a list of available categories.
7. Select to access the touch pad. Enter any 3 digit channel number then select OK.
8. Touch to view a list of channel categories. Select one to display full details of that channel and the current track.
9. Store the currently playing track to the song memory. If the audio system subsequently finds a stored track playing on a subscribed channel, notification will be given.
Note: Use the seek buttons on the steering wheel to find preset channels.
Activating satellite radio
1. Call SIRIUS on the displayed telephone number.
2. Provide them with the ID number, also displayed on screen.
You will also need your credit card. Make sure you are parked with a clear view of the sky while activation takes place. Activation can take up to 15 minutes.
Portable media
From the Audio/Video menu, select My music to display the My music menu.
1. Touch the Source icon to display all portable media options. Select an option.
2. Settings menu, select to switch traffic and news announcements on or off.
3. Depending on the selected mode, this soft key will be either Track list or Browse. In Stored CD mode, both soft keys will be displayed. Select Track list to view current CD or Stored CD track list. Select a track to start playback. Select Browse to view the contents of selected device (iPod, USB and Stored CD modes only).
4. Upload is applicable to Stored CD menu only. To store a CD select Upload alongside an empty slot. There are 10 slots available.
5. Touch and release to skip up or down to the next or previous track. Touch and hold to scan forwards or back through the current track.
6. Repeat, touch and release to repeat the current track continuously.
Touch and release again to repeat the current stored CD, current MP3 folder or current USB folder.
Touch and release a third time to cancel Repeat mode.
7. Pause/Play. Select to pause playback, select again to resume playback.
8. View information about the current track.
Portable media
9. Shuffle, touch and release once to play random tracks from the current CD, MP3 folder, USB folder or iPod playlist.
Touch and release again to play random tracks from CD, MP3 disc, USB folders or tracks on the media device or tracks loaded onto the stored CD store.
Touch and release a third time to cancel Shuffle mode.
Note: When connecting a Bluetooth wireless technology device, use the touch screen to operate and search the device. Many of the controls are similar to CD operation.
Note: Repeat and shuffle modes are not available for Bluetooth® wireless technology devices.
SAT 110:36
Preset 1Preset 2Preset 3
Preset 4Preset 5Preset 6
Programme title
C\fannel No .Radio
Instant
replay
Sett\fngs
Channel
\fnp\bt
Favor\ftes
Browse
channels
SAT 1/2/3
My music
My video
12324
5
6
7
8
9
MY music: CD 110:36
Settin\fs
02.32
Tr ac\b list
Browse
UploadMy video
SA T Radio
Radio
Tr 3/
15
Music title
Artist
Shuffle Shuf
fleRepeat
Source
1
2
3
4
567895
1
32
4
JJM189635142.indd 12-133/19/2013 12:21:55 PM

NAVIGATION
14
TELEPHONE
15
Touch screen navigationCalls via the touch screen
With a phone paired and active, press the PHONE button below the touch screen.
1. Select Digit dialing, Phonebook or Last 10. With Digit dialing selected, use the keypad to enter the number. With Phonebook selected, choose a number from the downloaded phonebook. Last 10 displays the previous 10 calls. Choose one to dial.
2. To make the call touch the connect icon . The icon will change to a connected call icon.
3. To end a call touch .
Phonebook
Last 10
Phone10:36
Digit dialing Settings
DeleteChang
e
phone
Name
01234567890_
Use
handsetPQRS TUVWXYZ
1ABC
DEF
JKL MNO
GHI2
3
4 5
6
7 8
9
0 #
+
On initial activation, make sure that both the correct country and search area have been selected.
For more information refer to the Navigation section of the Owner’s Handbook.
NOTE: To access navigation press either the N AV hard key or touch the Nav icon on the Home menu.
1. Use to enter a new destination. Provides a choice of options when entering a destination.
2. Displays previous destinations entered. Previous destinations can be selected as a new destination.
3. Turns the POI (Point Of Interest) icons on the map on/off.
4. When a destination is set, the Jaguar logo in this position is replaced by a soft key which enables the last voice instruction to be repeated.
5. Soft key is highlighted while voice guidance is enabled. Touch to turn voice guidance off.
6. POI shortcuts: Touch icon to list available POIs that are close to the vehicle position.
7. Calculates a detour from the current route.
8. Advances to the main map screen.
9. There are 2 navigation menu screens. Use the More... soft key to toggle between them. The second map screen features the following soft keys. Stored locations. Used to manage the stored data. TMC (Traffic Message Channel). Provides data about road conditions and any events that may affect the current route. Route options. Allows selection of various options for the route. Nav set-up. For setting personal preferences within the navigation system.
10.
Cancel current route guidance.
Selecting navigation
When navigation is selected after the ignition is turned on, a caution screen is displayed. Touch Agree.
Note: At the first time of accessing the caution screen, set the required language.
Setting a destination
Select Destination entry.
Select Address and enter address details using the keyboard. As each part of the address is refined, touch OK or List to display all the streets and towns that are available for selection. If the house number is not known, press OK, the mid-point of the road is then used as the destination.
When the address entry fields are complete, press OK to move to the map screen.
Start guidance
The map screen will display the selected destination.Touch GO to start route calculation. Touch Review route if you want to take an alternative route.
Touch Go to start guidance.
Review route
There will be a choice of 3 routes or Change route. 3 routes will display 3 different route options on the map. Select Route 1, 2 or 3 by touching the respective box displayed on the right side of the map and then select GO.

Bluetooth® wireless technology devices See page 2, items 7 and 43
Connection must be made with ignition on or engine running.
Use the following procedure in conjunction with your phone manufacturer’s instructions.
Pairing and connecting using your phone
NOTE: The process of pairing and connecting a phone to the vehicle will vary depending on the type of phone used.
1. Switch the ignition on and make sure the touch screen is active.
2. From the Home menu, select Phone.
3. If no phone is connected, select Search new, otherwise select Change phone and then select Search new.
4. Select Device to vehicle option.
NOTE: The vehicle’s Bluetooth wireless technology system is discoverable for only 3 minutes.
5. Using your phone, search for Bluetooth wireless technology devices. On some phones, this is referred to as new paired device. See your phone’s operating instructions for further information.
6. When the vehicle’s system is discovered, begin the pairing process and follow the on-screen instructions.
7. When requested, enter a PIN of your choice into your phone and the vehicle system. Select OK.
8. When your phone is paired and connected, a confirmation message will be displayed.
NOTE: Some phones require the pairing to be set as ‘authorised’ or ‘trusted’ in order to automatically connect. Please refer to your phone’s operating instructions for further information.
Downloading phonebook entries
When a phone with phonebook download capability is paired and docked, its phonebook directory can be automatically downloaded to the vehicle system.
See PHONEBOOK in the Owner’s Handbook for more information.
Bluetooth Connectivity
Compatible Bluetooth wireless technology devices can communicate with the vehicle’s in-built telephone system. For the latest compatibility information, refer to the Owners Section at www.jaguarusa.com.
Calls via the steering wheel controls
1. Press to answer an incoming call. Press and release to make a call. Press and hold to display Phonebook.
2. Press to move up a displayed list. While in a call, press to increase volume.
3. Press to move down a displayed list. While in a call, press to decrease volume.
4. Press to go to Last 10 list of dialled, received and missed calls.
5. Press to move through the Last 10 list. After the last item the list will exit.
Nav menu: 1 of 2
Return to
mapMore...DetourCancel
guidance
Destination
entry Previous
destinationRoute voice guidance
17:40
DestinationPreviousdt iti
P+
12354
89
7
6
10
Display POI
POI
Nav
2
4
3
1
5
Operating notes
• Phone reception is dependent on the phone and network signal. Performance may be improved by changing your phone’s settings (e.g. turning off 3G).
• If echo is experienced when using the phone, reduce the audio system volume during the call.
JJM189635142.indd 14-153/19/2013 12:21:56 PM