2014 INFINITI QX80 key

12
first drive features
TO RETURN THE 2ND ROW SEATS TO THE
STANDARD POSITION:
1.


Return the carpet panel flap to the back side of the

seatback and secure it in place.
2.


Pull the seat reclining lever B up while you lift up
and push back on the seatback until it locks in place.
3.


Return the seat bottom backward to its original
position until it locks in place.
4.


Use the seat reclining lever to adjust the seat to the

desired position.
For more information, refer to the “Safety — Seats, seat belts and supplemental restraint system (sectio\
n 1) ” section of your
Owner’s Manual.
3rd Row Power Folding Seats
The 3rd row seats can be folded flat for maximum
cargo hauling or extra storage space.
Before folding down the 3rd row seats:



•


The vehicle’s shift lever must be in
P (PARK)
or N (NEUTRAL).



•


Place the seat belt buckles in the storage of the seat

cushion
01 to avoid dropping them under the seat
cushion or causing damage to your leather seats.



•


Disconnect and secure the center seat belt and

tongues into the retractor base
02.



1. To release the seat belt connector tongue, insert

a suitable tool (a key, for example) into the
opening on the side of the connector buckle.



2.


Retract the seat belt up to the retractor base located in the rear ceili\
ng storage area.



3.


Insert the seat belt tongue into the fabric sleeve

so that it will lay flat.



4.


Secure the connector tongue into the retractor base.



5.


Always reconnect the center seat belt when the

seat is returned to the upright position.



•


Make sure that there are no objects on the

seat cushion.



• Lower the 3rd row head restraints.
To lower the seat, push and hold the front portion A
of the right or left 3rd row power folding seat switch 01.
To return the seats to an upright position, press the back
portion
B of the right or left 3rd row power folding seat switch 01.
For more information, refer to the “Safety –– Seats, seat belts and supplemental restraint system (se\
ction 1) ” of
your Owner’s Manual.
01
3.2.
B
02
01
B A
B A
1591592_14b_Infiniti_QX80_QRG_093013.indd 129/30/13 9:36 AM

13
Outside Mirror Control Switch
Move the control switch 01 right or left to select the
right or left side mirror.
Adjust each mirror to the desired position using the
switch
02.
Move this switch 01 to the center (neutral) position
to prevent accidentally moving the mirror.
POWER FOLDING OUTSIDE MIRRORS
To fold the outside rearview mirrors, push the switch 03 to the
position. To unfold the
outside rearview mirrors, push the switch
03 to the
position. If mirrors are manually operated or bumped, the mirror body can become l\
oose at the

pivot point.
To correct electronic mirror operation, cycle mirrors by pushing the out\
side rearview mirror
folding switch
03 to the
position until completely closed, then push the switch 03 to
the
position until the mirror is completely open.
REVERSE TILT-DOWN FEATURE
When backing up the vehicle, the right or left outside mirrors will turn\
downward automatically
to provide better rear visibility.



1.

Push the ignition switch to the
ON position.



2.

Move the shift lever to the
R (REVERSE) position.



3.

Choose the right or left outside mirror by operating the outside mirror \
control switch.



4.

The outside mirror surfaces move downward.
When one of the following conditions has occurred, the outside mirror su\
rfaces will return
to their original positions.



•

The shift lever is moved to any position other than
R (REVERSE).



•

The outside mirror control switch is set to the center (neutral) posit\
ion.



•

The ignition switch is pushed to the
OFF position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Starting/Stopping the Engine
It is important to make sure the INFINITI Intelligent



Key is with you (that is, in your pocket or purse).
Depress the brake pedal.
Press the ignition switch START/STOP button to start
the engine.
TURNING THE ENGINE OFF
Move the shift lever to the P (PARK) position and apply the parking brake.
Press the ignition switch START/STOP button to turn the engine off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
01
02
03
1591592_14b_Infiniti_QX80_QRG_093013.indd 139/30/13 9:36 AM

22
system guide
To cancel a voice recognition session, simply wait 5 seconds, say “Ca\
ncel” or “Quit”, or
press and hold the
button for 5 seconds.
If the Voice Recognition system does not recognize your voice commands, \
train the system
using the Speaker Adaptation Mode. See your Owner’s Manual for detail\
ed information.
For more detailed information and instructions, refer to your cellular p\
hone Owner’s Manual
and visit www.InfinitiUSA.com/Bluetooth.
CONNECTING PROCEDURE
The vehicle must be stationary when connecting
the phone.
1.

Press the
button and select the “Connect Phone” key.
2. Initiate connecting from the phone.



•


The connecting procedure varies according to

each cellular phone model. For detailed connecting
instructions and a list of compatible phones,
please visit www.InfinitiUSA.com/bluetooth.



•


When prompted for a PIN code, enter “1234”

from the handset. (The PIN code is assigned by
INFINITI and cannot be changed.)
3.


When the connecting is complete, the screen will
return to the Phone menu display.
PHONEBOOK SETUP
Depending on your cell phone, the system may
automatically download your cell phone’s entire
phonebook to the vehicle’s Bluetooth
® system.
If the phonebook does not download automatically,
40 entries can be individually downloaded.
To manually download entries:



1.

Press the button and select the “Quick Dial” key.



2.


Select the “Add New” key at the top of the display.

There are different methods to input a phone number.
Select one of the following options:
“Copy from Call History” to save a number from the
Outgoing, Incoming or Missed Calls lists.
“Copy from the Phonebook” to save a number that has
been downloaded from your handset to the vehicle.
“Enter Number by Keypad” to input the number and name manually.
1591592_14b_Infiniti_QX80_QRG_093013.indd 229/30/13 9:36 AM

23
DIALING A CONTACT USING VOICE RECOGNITION
To make a call using voice recognition, follow

this procedure:
1.


Press the button on the steering wheel.

After the tone, say “PHONE”
2.


After the system confirms your command, wait for the

tone and say “Phonebook”.
3.


The system will prompt you to speak a name. After the tone, say a name f\
rom your

phonebook. Be aware that for some phones it will be necessary to say the\
name in the last
name, first name format.
4.


The system will give you a list of close matches. After the tone, select\
the correct match by

saying the number next to the correct match.
5.


The system will confirm your selection. After the tone, say “Dial”\
.
RECEIVING/ENDING A CALL
To accept the call, press the button on the steering
wheel or touch the “Answer” key.
To reject the call, touch the “Reject Call” key.
To hang-up, press the button or touch the
“Hang up” key.
For more information, refer to the “Monitor, climate, audio, phone and
voice recognition systems (section 4)” of your Owner’s Manual or please
visit www.InfinitiUSA.com/bluetooth.
1591592_14b_Infiniti_QX80_QRG_093013.indd 239/30/13 9:36 AM