2014 INFINITI QX60 display

first drive features
Automatic Climate Controls
01 AUTO BUTTON
The auto mode may be used year-round. Press the AUTO button to turn the system on
and the system will automatically control the inside temperature (autom\
atic cooling
and/or dehumidified heating), air flow distribution and fan speed.
02 CLIMATE BUTTON
Press the CLIMATE button to adjust your automatic climate controls using the climate
settings on the control panel display screen.
03 DRIVER’S SIDE TEMPERATURE CONTROL BUTTONS
Press the driver’s side temperature control buttons up for warmer air or down
for
cooler air.
04 DRIVER’S SIDE MANUAL AIR FLOW CONTROL BUTTON
Press the driver’s side manual air flow control button to manually control the driver’s side
air flow modes.
The following air flow indicator modes will display on the control panel\
display screen:



Air flows from the center and side vents.



Air flows from the center, side and foot vents.



Air flows mainly from the foot vents.



Air flows from the defroster and foot vents.
05 PASSENGER’S SIDE TEMPERATURE CONTROL BUTTONS
To manually adjust the passenger’s side temperature, press the passen\
ger’s side
temperature control buttons up
for warmer air or down
for cooler air.
06 DUAL BUTTON

Press the
DUAL button to turn the passenger’s side temperature controls on or off. T\
his
will allow the passenger’s side temperature to be adjusted independen\
tly from the driver’s
side by pressing the passenger’s side temperature control buttons.
07 FAN SPEED CONTROL BUTTONS
Press the left button to decrease the fan speed or press the right button to increase

the fan speed.
0406
0809120701101102
0305
18
1591599_14b_Infiniti_QX60_QRG_100913.indd 1810/9/13 11:09 AM

19
Rear Climate Controls
To activate the system:



1.
Press the REAR button

01 on the front control panel until Rear Air-conditioning screen
is displayed.
•

The

indicator

light

will

illuminate.
08 DEFROSTING/DEFOGGING FRONT AND SIDE WINDOWS
Press the defroster control button to turn the system on. The A/C automatically
turns on when the defroster mode is selected. This feature removes humid\
ity from
the air.
To defrost the front and side windows, set the temperature controls 03 and fan
speed controls 07 to their maximum settings.
09 DEFROSTING REAR WINDOW AND OUTSIDE MIRRORS
Push the rear window defroster switch
to turn the system on or off. This function automatically turns off after approximately 15 minutes.
10 REAR AIR CONDITIONER To control the rear automatic air conditioning

system with the front air conditioner control
panel, press the REAR button.
When the rear automatic air conditioning system
is on, the indicator light on the
REAR button will
illuminate and the front display will switch to the
rear air conditioner screen. Use the driver
temperature and fan speed buttons to adjust settings.
To adjust the front air conditioning system, press the REAR button again.
To turn off the rear automatic air conditioning system from the front co\
ntrols, press
the REAR button until the Rear Air-conditioning screen is displayed. Then press the
OFF button.
The rear control buttons will not function when Rear Air-conditioning screen is shown
on the front display.
11 INTAKE AIR CONTROL BUTTON
Press the intake air control button to recirculate interior air inside the vehicle. The
indicator light on the button will illuminate. This system is used to a\
void certain
outside odors and helps to adjust the inside vehicle temperature more ef\
fectively.
The air recirculation mode cannot be activated when the climate control \
sys tem is in the
front defrost mode
or front defrost and foot vent mode
.
Press the intake air control button again to change the air circulation from the
intake air to the outside air. The
indicator light on the button will turn off.
12 OFF BUTTON Press the
OFF button to turn the climate control system off.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (secti\
on 4)” of your
Owner’s Manual.
1591599_14b_Infiniti_QX60_QRG_100913.indd 1910/9/13 11:09 AM

first drive features
0201
030506
04
FM/AM/SiriusXM®* Satellite Radio with CD/DVD Player (if so equipped)
01 VOLUME/ON•OFF CONTROL KNOB
Press the
VOL/ON•OFF control knob to turn the system on or off. Turn the knob right or
left to increase or decrease the volume.
02 TUNE/FOLDER/AUDIO CONTROL KNOB
To manually tune the radio, turn the
TUNE/FOLDER/AUDIO knob left or right.
03 SEEK•CAT/TRACK BUTTONS
To scan quickly and stop at the previous or next broadcast station, pres\
s th
e or
end of the SEEK•CAT/TRACK button.
For satellite radio, press the or end of the SEEK•CAT/TRACK button to switch
to the first channel of the previous or next category.
To change tracks on a CD, press the or end of the SEEK•CAT/TRACK button.
To fast forward or rewind a track on a CD, press and hold the or end of the
SEEK•CAT/TRACK button.
01
02
05
0304
*SiriusXM® Satellite Radio is only available on vehicles equipped with an optional\
satellite radio subscription service.20 •
The
Fan Speed, Temperature, AUTO, and OFF buttons will now control the Rear
Air-conditioning system.


2.
Press the
REAR button

01 again, and the screen
will return to what was previously displayed.
•


The


indicator

light

will

stay illuminated to
indicate that the Rear Air-conditioning system
is active.
OFF button
02 — Turns off the rear climate control
system, and
REAR button indicator light.
Fan speed control buttons 03 — Press
or
to increase or decrease fan speed.
Temperature increase and decrease buttons 04 —
Adjusts the rear temperature up or down
.
AUTO button
05 — System automatically works
to keep air flow and fan speed at a
constant temperature.
For more information, refer to the “Monitor, climate, audio, phone and voice
recognition systems (section 4)” of your Owner’s Manual.
1591599_14b_Infiniti_QX60_QRG_100913.indd 2010/9/13 11:09 AM

21
USB/iPod® Interface
The USB jack 01 is located in the center console
under the arm rest.
When a compatible USB memory device or
iPod® is plugged into the USB jack, compatible
audio and video files stored on the device can
be played through the vehicle’s audio system
and front display.
For more information, refer to the “Monitor, climate, audio, phone and
voice recognition systems (section 4)” of your Owner’s Manual.
Conventional (Fixed Speed) Cruise Control
The cruise control system enables you to set a
constant cruising speed once the vehicle has
reached 25 MPH (40 km/h).
The system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.
To activate the cruise control, push the CRUISE

ON/OFF

switch
01. The
CRUISE
indicator light in



the instrument panel will illuminate.
To set cruising speed, accelerate the vehicle to the
desired speed, push the COAST/SET switch
02
and release. The SET indicator light
in the instrument panel will illuminate. Take your foot
off the accelerator pedal.
y
our vehicle will maintain the set speed.
To reset at a faster cruising speed, push and hold the ACCEL/RES switch 03. When the



vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COAST/SET switch 02. Release the



switch when the vehicle slows to the desired speed.
0102
03
04
01
04 STATION PRESET BUTTONS
Twelve stations can be set for the FM band, six for the AM band and eigh\
teen for
satellite radio.
To store a station in a preset, you must first select a radio band by pr\
essing the
FM•AM


05 or XM
06 button, then tune to the desired FM, AM or XM satellite radio station.
Then press and hold the desired station preset button
(1-6) until the preset number is
updated on the display and the sound is briefly muted. The channel indic\
ator will then
display and the sound will resume. Programming is now complete.
To retrieve a previously set station, select the radio band where the pr\
eset was stored
then press the corresponding station select button (1-6).
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (secti\
on 4)” of your
Owner’s Manual.
1591599_14b_Infiniti_QX60_QRG_100913.indd 2110/9/13 11:09 AM

Vehicle Information Display
The vehicle information display 01 displays such
items as:
Vehicle settings Trip computer information Drive system warnings and settings
(if so equipped)
Cruise Control System Intelligent Cruise Control (ICC) System
(if so equipped) information
Intelligent Key operation information Indicators and warnings Tire pressure information
USING THE VEHICLE INFORMATION DISPLA
y
The vehicle information display modes can be changed


using the
button
02 and ENTER button 03
located
on the steering wheel.
1.


Press
02 to enter the vehicle information menu items.
2.


Press 04 to navigate through the items in vehicle information.
4.


Press

ENTER
03 to change or select an item in the vehicle information display.
5.


Press 05 to go back to the previous menu.
START UP DISPLA y
When the vehicle is placed in the

ON or ACC position the screens that display in the vehicle
information include:
Active system status (if so equipped) Trip computer Tire pressure information Fuel economy Warnings (displays when a warning is present)
RESETTING THE TRIP COMPUTER
1.

Press the
button
02 until you reach the Trip
computer mode 06.
2.


Press the
button again for more than 1.5
seconds to reset average fuel consumption,
average speed, distance to empty and journey time.
01
system guide
03
02
04
05
06
24
1591599_14b_Infiniti_QX60_QRG_100913.indd 2410/9/13 11:09 AM

25
Bluetooth® Hands-free Phone System
A cellular telephone should not be used while driving
so full attention may be given to vehicle operation.*
S
y
STEM OPERATING TIPS
Press the or button to interrupt the voice

prompts at any time and speak a command after
the tone.
The “Help” command can be used to hear a list of
available commands at any time.

Reduce background noise as much as possible by
closing windows and pointing HVAC vents away from
the ceiling.
Speak naturally without long pauses and without
raising your voice.
When speaking phonebook names, please be aware
some phones require the last name to be s
poken
before the first name. For example, “Michael Smith”
may be spoken as “Smith Michael”.
To cancel a Voice Recognition session, say “Cancel” or
“Quit” or press and hold the

or
button for 5 seconds.
To go back to the previous command, say “Go back” or “Correctio\
n”.

If the Voice Recognition system does not recognize your voice commands, \
train the system
using the Speaker Adaptation Mode. See your Owner’s Manual for detail\
ed information.
For more detailed information and instructions, refer to your cellular p\
hone’s Owner’s Manual and
visit ww.InfinitiUSA.com/bluetooth.
*Some jurisdictions prohibit the use of cellular telephones while drivin\
g.
Bluetooth® Controls
Microphone
SETTINGS
The setting mode allows you to change the information displayed in the v\
ehicle
information display:
Driver Assistance (if so equipped)
Main Menu Selection Body Color Maintenance Alarms
Vehicle Settings
Language Unit Welcome Effects
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
1591599_14b_Infiniti_QX60_QRG_100913.indd 2510/9/13 11:09 AM

27
MAKING A CALL B
y
PHONEBOOK ENTR
y

In some cases, names stored using all UPPERCASE letters may not be recog\
nized by the
voice recognition system.
1.


Press the button.
2.


After waiting for the tone, say “Call”.
3.


After the next tone, speak a name of a phonebook entry. For example “\
Michael Smith”.
4.


Confirm the correct name is recognized by saying “Dial” after the \
tone.
MAKING A CALL B

y PHONE NUMBER
1.


Press the button.
2.


After waiting for the tone, say “Call”.
3.


After the next tone, say “Phone Number”.
4.


After the next tone, say “123-456-7890”.
y ou may also say the digits in groups of 3, 3 and 4, respectively. To use\
this group dialing
method, say only the first 3 digits of the phone number instead of all 1\
0 digits. After the
system recognizes the digits, it will request the next 3 digits and fina\
lly the last 4 digits.
5.


After the system speaks the correct number and sounds the tone, say “\
Dial.”
RECEIVING/ENDING A CALL
To accept the call, press the button on the steering wheel.
To reject the call, press the
button.

To hang-up, press the
button.
Bluetooth System with Navigation (if so equipped)
CONNECTING PROCEDURE
The vehicle must be stationary when connecting



the phone.


1. Press the SETTING button on the instrument
panel and select the “Bluetooth” key on the
display.
1591599_14b_Infiniti_QX60_QRG_100913.indd 2710/9/13 11:09 AM

system guide
2. Select the “Connect Bluetooth” key.


3.
A popup box will appear on the screen, prompting
you to confirm that the connection is for the phone
system. Select the “

y es” key.
4.


Initiate connecting from the phone.
The connecting procedure varies according
to each cellular phone model. For detailed
connecting instructions and a list of
compatible phones, please visit
www.InfinitiUSA.com/bluetooth.
When prompted for a PIN code, enter “1234”
from the handset. (The PIN code is assigned by
INFINITI and cannot be changed.)
5.


When connecting is complete, the screen will return
to
the Bluetooth settings screen.
PHONEBOOK SETUP
Depending on your cell phone, the system may automatically download you r cell phone’s



entire phonebook to the vehicle’s Bluetooth system.

If the phonebook does not download automatically, the vehicle phonebook
may be set for
up to 40 entries.
To manually download entries:
1.


Press the
button and select the
“Vehicle Phonebook” key.



2.


Select the “Add New” key at the top of the display.




There are different methods to input a phone




number. Select one of the following options:


• “Copy

from Call History” to save a number from



the Outgoing, Incoming or Missed Calls lists.


•
“Copy


from the Handset” to save a number
that has been downloaded from your handset
to the vehicle.
•



“Enter Number by Keypad” to input the

number and name manually.
28
1591599_14b_Infiniti_QX60_QRG_100913.indd 2810/9/13 11:09 AM