first drive features
12
Power Seat Adjustments
To slide the seat forward or backward, push the
control switch
01 forward or backward.
To recline the seatback, push the switch
02
forward or backward.
SEAT LIFTER
To raise or lower the front portion or height of the
seat, push the front or back end of the switch
01 up or down.
POWER LUMBAR SUPPORT (if so equipped for driver’s seat)
To adjust the seat lumbar support, push the front or back end of the swi\
tch
03.
For more information, refer to the “Safety —— seats, seat belts and supplemental restraint system (section 1)”\
of your
Owner’s Manual.
2ND Row Seats
To slide the seat forward or backward, pull the
center of the bar
01 up and hold it while you slide
the seat forward or backward to the desired
position. Release the bar to lock the seat
in position.
To recline the seatback, pull up on the recline handle
02 and lean back. To bring the seatback forward, pull
the lever up and lean your body forward. Release the
lever to lock the seatback in position.
MULTI-MODE/CHILD SEAT ACCESS FUNCTION
This feature is not available on driver’s side of 2nd row seat.
If a child safety seat is installed on the passenger’s side of the 2nd row seat, the 3rd row
can be accessed without removing the child safety seat.
To access the 3rd row from outside the vehicle, lift up on the seatback release lever
03.
EZ ENTRy MODE
To enter the 3rd row from outside the vehicle, lift up on fully the seatback lever
03.
This will release the back of the seat and fold up the seat cushion.
For access to the rear seat slide the entire seat forward by pushing on \
the upper
seatback area.
To return the seat to a locked position, push the upper seatback rearwar\
d until the
seatback and track are locked. Push the seat cushion down. Locking the s\
eatback will
also lock the track.
For more information, refer to the “Safety —— seats, seat belts and supplemental restraint system (section 1)”\
of your Owner’s Manual.
010203
0102
03
1591600_14b_Infiniti_QX60_HEV_QRG_092413.indd 129/24/13 11:43 AM
13
3RD Row Manual Reclining Seatback
To recline the seatback, pull up on the latch
01
located on the outside corner of each seatback.
Lean back until the desired angle is obtained.
To bring the seatback forward again, pull up on the
latch
01 and move your body forward. The
seatback will move forward.
For more information, refer to the “Safety —— seats, seat belts and
supplemental restraint system (section 1)” of your Owner’s Manual.
Automatic Drive Positioner (if so equipped)
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner
01 memory.
Follow these procedures to set the memory positions:
• Confirm the shift lever is in the P (PARK) position.
• Push the ignition switch to the ON position.
•
Adjust the driver’s seat, steering column and
outside mirrors to the desired positions using the
adjusting switches for each feature.
• Push the SET switch and within 5 seconds, push the memory switch (1 or 2) for at least 1 second.
• The indicator light on the memory switch you select will illuminate for \
approximately
5 seconds, and a chime will sound (if so equipped) when memory is stor\
ed correctly.
• The driver’s seat, steering column and outside mirror positions are n\
ow set to your preference.
These memorized positions can also be linked to your INFINITI Intelligen\
t Key.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Outside Mirror Control Switch
To select the right or left side mirror, move the
control switch
01 right or left.
Adjust each mirror to the desired position using the
switch
02.
To fold the outside rearview mirrors, push the
switch
03 to the
position. To unfold the
outside rearview mirrors, push the switch
03 to
the
position.
02
01
03
01
01
1591600_14b_Infiniti_QX60_HEV_QRG_092413.indd 139/24/13 11:43 AM
