7
Outside Mirror Control Switch
To select the right or left side mirror, turn the control
switch
01 right or left.
To adjust the mirror angle, move the control switch
01 up, down, right or left.
To prevent accidentally moving the mirror, turn and
set the switch to the middle (neutral) position.
REVERSE TILT-DO
w N FEATURE (if so equipped)
w hen backing up the vehicle, the right or left outside mirror can be sele\
cted to automatically
turn downward to provide better rear visibility.
1.
Push the ignition switch to the
ON position.
2.
Move the shift lever to the
r ( re V er S e ) position.
3.
c hoose the right or left outside mirror by operating the outside mirror c\
ontrol switch
01.
4.
The selected outside mirror surface moves downward.
when one of the following conditions has occurred, the outside mirror sur\
face will return to
its original position:
• The shift lever is moved to any position other than r ( re V er S e ).
• The
outside mirror control switch is set to the center (neutral) position.
• The
ignition switch is pushed to the OFF position.
For more information, refer to the “pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Automatic Drive Positioner (if so equipped)
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner memory.
Follow these procedures to set the memory positions:
• Confirm the shift lever is in the p ( p A rk ) position.
• Push
the ignition switch to the ON position.
•
Adjust
the driver’s seat, steering column and outside mirrors to the desired positions using
the adjusting switches for each feature.
•
Push
the S et switch and within 5 seconds, push the memory switch (1 or 2) for at
least 1 second.
•
The
indicator light on the memory switch you select will illuminate for approximately
5 seconds.
• The
driver’s seat, steering column and outside mirror positions are now set to your preference.
These memorized positions can also be linked to your INFINITI Intelligen\
t Key.
For more information, refer to the “pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
01
1378280_14a_Infiniti_QX50_QRG_060613.indd 76/6/13 10:21 AM
