2014 INFINITI Q70 buttons

Black plate (151,1)
[ Edit: 2013/ 10/ 21 Model: Y51-D ]
.Any of the buttons on the IntelligentKey are pushed. (Note: Panic button
should be pushed for more than 1
second.)
Setting hazard indicator and horn
mode
Y51D-V-E01-A40448AF-C6FA-43AE-92F5-1D5AEFB7DEBCThis vehicle is set in hazard indicator and
horn mode when you first receive the
vehicle.
In hazard indicator and horn mode, when
the LOCK
button*1is pushed, the
hazard indicator flashes twice and the horn
chirps once. When the UNLOCK
button
*2is pushed, the hazard indicator flashes
once.
If horns are not necessary, the system can
be switched to the hazard indicator mode.
In hazard indicator mode, when the LOCK
button is pushed, the hazard indicator
flashes twice. When the UNLOCK
button is pushed, neither the hazard
indicator nor the horn operates.
Pre-driving checks and adjustments3-15
Condition:

Black plate (152,1)
[ Edit: 2013/ 10/ 21 Model: Y51-D ]
3-16Pre-driving checks and adjustments
Hazard indicator and horn mode:GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0
DOOR LOCKDOOR UNLOCK TRUNK UNLOCK
Intelligent Key system
(Using door handle or trunk request switch) HAZARD -
twice
OUTSIDE CHIME - twiceHAZARD -
once
OUTSIDE CHIME - onceHAZARD - none
OUTSIDE CHIME -
4
times
Remote keyless entry system
(Using
,orbutton) HAZARD -
twice
HORN - once HAZARD -
once
HORN - none HAZARD - none
HORN - none
Hazard indicator mode:GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0
DOOR LOCK
DOOR UNLOCK TRUNK UNLOCK
Intelligent Key system
(Using door handle or trunk request switch) HAZARD -
twice
OUTSIDE CHIME - none HAZARD - none
OUTSIDE CHIME - noneHAZARD - none
OUTSIDE CHIME - none
Remote keyless entry system
(Using
,orbutton) HAZARD -
twice
HORN - none HAZARD - none
HORN - noneHAZARD - none
HORN - none
Switching procedure:GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0To switch the hazard indicator and horn
(chime) operation, push the LOCK
*1
and UNLOCK*2buttons on the In-
telligent Key simultaneously for more than
2 seconds.
. When the hazard indicator mode is set,
the hazard indicator flashes 3 times.
. When the hazard indicator and horn
mode is set, the hazard indicator
flashes once and the horn chirps once.
NOS1695
Condition:

Black plate (170,1)
[ Edit: 2013/ 10/ 21 Model: Y51-D ]
Bluetooth®Hands-Free Phone System
(models with navigation system) ...
........................ 4-85
Regulatory information ...
.................................. 4-86
Voice commands ...
........................................... 4-86
Control buttons ...
............................................. 4-87
Connecting procedure ...
.................................... 4-87
Phone selection ...
............................................. 4-88
Quick Dial ...
..................................................... 4-88
Making a call ...
................................................ 4-90
Receiving a call ...
............................................. 4-91
During a call ...
................................................. 4-92
Phone setting ...
................................................ 4-92
Troubleshooting guide ...
................................... 4-94
Bluetooth
®Hands-Free Phone System
(models without navigation system) ...
................... 4-95
Regulatory information ...
.................................. 4-96 Control buttons
...
............................................ 4-97
Voice recognition system ...
............................. 4-97
Pairing procedure ...
...................................... 4-102
Phonebook registration ...
.............................. 4-103
Making a call ...
............................................. 4-104
Receiving a call ...
.......................................... 4-104
During a call ...
.............................................. 4-104
Phone settings ...
........................................... 4-105
Voice adaptation mode ...
.............................. 4-108
INFINITI Voice Recognition system (models with
navigation system) ...
.......................................... 4-109
INFINITI Voice Recognition
standard mode ...
.......................................... 4-110
Using the system ...
....................................... 4-113
INFINITI Voice Recognition alternate
command mode ...
......................................... 4-121
Using the system ...
....................................... 4-129
Troubleshooting guide ...
............................... 4-134
Condition:

Black plate (172,1)
[ Edit: 2013/ 10/ 21 Model: Y51-D ]
4-4Monitor, climate, audio, phone and voice recognition systems
Y51D-V-E01-D43391EA-34C3-427B-8F03-AEF473377191
SAA2953
Models with navigation system
1. “DISP” display setting button (P.4-10)
2, 5, 6. For navigation system control buttons
(Refer to the separate Navigation
System Owner’s Manual.) 3.
“INFO” vehicle and navigation infor-
mation button (P.4-10)
4. “SETTING” button (P.4-16)
7. INFINITI controller (P.4-6)
8. “STATUS” status display button
(P.4-10) 9.
“
OFF” brightness control and
display ON/OFF button (P.4-10)
CENTER MULTI-FUNCTION CONTROL PANEL
Condition:

Black plate (230,1)
[ Edit: 2013/ 10/ 21 Model: Y51-D ]
4-62Monitor, climate, audio, phone and voice recognition systems
SAA2957
FM-AM-SAT RADIO WITH COMPACT
DISC (CD) PLAYER
Y51D-V-E01-D9CC7884-9445-408C-9F6E-DBD54D7ABCFB1. ON·OFF/VOLUME control knob
2.Radio CAT (category)/REW (rewind)
button for SEEK/TRACK
3. Radio CAT(category)/FF (fast forward) button for SEEK/TRACK
4. FM·AM radio band select button
5. XM radio band select button
6. DISC·AUX selector button
7. RDM (random) RPT (repeat) play but- ton 8. Radio SCAN (tuning) button
9. CD EJECT button
10.
Radio tuning/MP3/WMA/AAC folder
selector/AUDIO control knob
11. Radio station preset buttons
No satellite radio reception is available
unless a SiriusXM Satellite Radio subscrip-
tion is active.
For all operation precautions, see “Audio
operation precautions” (P.4-49).
The satellite radio mode requires an active
SiriusXM Satellite Radio subscription. The
satellite radio is not available in Alaska,
Hawaii and Guam.
It may take some time to receive the
activation signal after subscribing the
SiriusXM Satellite Radio. After receiving
the activation signal, an available channel
list will be automatically updated in the
radio. Push the ignition switch from LOCK
to ACC to update the channel list.
Condition:

Black plate (232,1)
[ Edit: 2013/ 10/ 21 Model: Y51-D ]
4-64Monitor, climate, audio, phone and voice recognition systems
channels from all of the categories
when any category is not selected.
SEEK tuning/CATEGORY (CAT):GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0.For AM and FM radio
Push the SEEK button
orto
tune from low to high or high to low
frequencies and to stop at the next
broadcasting station.
. For SiriusXM Satellite Radio
Push the SEEK button
orto
tune to the first channel of the next or
previous category.
During satellite radio reception, the follow-
ing notices will be displayed under certain
conditions.
. NO SIGNAL (No signal is received while
the SAT tuner is connected.)
. OFF AIR (Broadcasting signed off)
. CHECK ANTENNA (Antenna connection
error)
. LOADING (When the initial setting is
performed)
. UPDATING (When the satellite radio
subscription is not active)
SCAN tuning:GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0Push the SCAN tuning button to tune from
low to high frequencies and stop at each
broadcasting station/channel for 5 sec-
onds. Pushing the button again during this
5 seconds period will stop SCAN tuning
and the radio will remain tuned to that
station/channel.
If the SCAN tuning button is not pushed
within 5 seconds, SCAN tuning moves to
the next station/channel.
toStation memory operations:GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE012 stations/channels can be set for the FM
band (6 each for FM1 and FM2), 18 for
SiriusXM Satellite Radio (6 each for XM1,
XM2 and XM3) and 6 stations can be set
for the AM band.
1. Choose the radio band using the radio band select button.
2. Tune to the desired station/channel
using the
, SCAN button or the
radio TUNE knob.
3. Push and hold the desired station
preset button
tountil the radio
mutes.
4. The station indicator will then come on and the sound will resume. Memorizing is now complete.
5. Other buttons can be set in the same manner.
If the battery cable is disconnected, or if
the fuse opens, the radio memory will be
erased. In that case, reset the desired
stations/channels.
Menu (SiriusXM Satellite Radio) (models
with navigation system):
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0When the “Menu”key on the display is
selected while the SiriusXM Satellite Radio
is being played, the menu list will be
displayed.
The following items are available.
. Preset List
Displays the preset channel list. If 1 of
the 6 preset stations listed is touched
and held, the current station will be
stored as the new preset.
. Customize Channel List
Selects specific channels to skip while
using the TUNE, SEEK/CATEGORY or
Menu-Categories feature.
. Favorite Artists & Songs
Stores the current artist or song that is
being played. Touch the “Alert”key to
be reminded when the stored artist or
Condition:

Black plate (248,1)
[ Edit: 2013/ 10/ 21 Model: Y51-D ]
4-80Monitor, climate, audio, phone and voice recognition systems
Refer to your device manufacturer’s owner
information regarding the proper use and
care of the device.
CompatibilityY51D-V-E01-D92A8014-9ACF-4AB0-80E9-05AC2A320604The following models are available:
Models with navigation system:
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0.Fifth generation iPod®(version 1.2.3 or
later)
. iPod Classic
®(version 1.1.1 or later)
. First generation iPod touch®(version
2.0.0 or later)
. Second generation iPod touch
®(firm-
ware version 1.2.3 or later)
. First generation iPod nano
®(firmware
version 1.3.1 or later)
. Second generation iPod nano
®(firm-
ware version 1.1.3 or later)
. Third generation iPod nano
®(firmware
version 1.1 or later)
. Fourth generation iPod nano
®(firmware
version 1.0.2 or later)
Models without navigation system:
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0. Fifth generation iPod®(firmware ver-
sion 1.3)
. First generation iPod Classic
®(firmware
version 1.1.2 PC) .
Second generation iPod Classic
®(firm-
ware version 2.0 PC)
. First generation iPod touch
®(firmware
version 2.1)
. Second generation iPod touch
®(firm-
ware version 2.1.1)
. First generation iPod nano
®(firmware
version 1.3.1)
. Second generation iPod nano
®(firm-
ware version 1.1.3)
. Third generation iPod nano
®(firmware
version 1.1 PC)
. Third generation iPhone
®(firmware
version 2.1)
Make sure that the iPod
®version is
updated.
Audio main operationY51D-V-E01-E9F18D90-5F57-4FEA-BB66-53D355D891DDPush the ignition switch to the ACC or ON
position. Then, push the DISC·AUX button
repeatedly to switch to the iPod
®mode.
If the system has been turned off while the
iPod
®was playing, pushing the ON·OFF
button will start the iPod®.
PLAY:GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0When the DISC·AUX button is pushed with
the system off and the iPod®connected, the system will turn on. If another audio
source is playing and the iPod
®is con-
nected, push the DISC·AUX button repeat-
edly until the center display changes to the
iPod
®mode.
Interface:
GUID-CA441E56-2FD0-4540-A74C-DB510E9F7AE0The interface for iPod®operation shown on
the vehicle center display is similar to the
iPod
®interface. Use the INFINITI controller
and the ENTER or BACK button to play the
iPod
®with your favorite settings.
The following items can be chosen from the
menu list screen. For further information
about each item, see the iPod
®Owner’s
Manual.
. Now Playing
. Playlists
. Artists
. Albums
. Songs
. Podcasts
. Genres
. Composers
. Audiobooks
. Shuffle Songs
. Play Mode
The following buttons shown on the screen
Condition:

Black plate (255,1)
[ Edit: 2013/ 10/ 21 Model: Y51-D ]
JVH0047X
CONTROL BUTTONSY51D-V-E01-9B007571-3080-499C-844E-010DF9C11E78*1TALK/ PHONE SENDbutton
JVH0473X
CONNECTING PROCEDUREY51D-V-E01-0AB19846-AE5C-4A0C-9F99-267A234552651. Push thebutton, and select the
“Connect Phone” key.
SAA2520
2.When a PIN code appears on the
screen, operate the compatible Blue-
tooth
®cellular phone to enter the PIN
code.
The connecting procedure of the cellu-
lar phone varies according to each
cellular phone. See the cellular phone
Owner’s Manual for the details. You can
also visit
www.InfinitiUSA.com/bluetooth or call
INFINITI Consumer Affairs Department
for instructions on pairing INFINITI
recommended cellular phones.
When the connection process is com-
pleted, the screen will return to the
Monitor, climate, audio, phone and voice recognition systems4-87
Condition: