2014 INFINITI Q70 HYBRID light

10
first drive features
INFINITI Intelligent Key System
It is important to make sure the Intelligent k ey is
withyou (that is, in your pocket or purse).
The INFINITI Intelligent k ey system allows you to
lock or unlock your vehicle, open your trunk and
start the engine.
The operating range of the Intelligent ke y is within
31.5 in (80 cm) from each request switch.
To lock the vehicle, push either door handle request
switch
01 once or press the
button
02 on the key fob.
To unlock the vehicle, perform one of the following procedures:

•
Push
either door handle request switch
01 once;
the corresponding
door will unlock. Push the door handle request switch 01 again

within 1 minute; all other doors will unlock, or
•

Press


the
button
03 on the key fob to unlock the driver’s side

door. Press the
button again; all other doors will unlock.
To open the trunk, press the
button
04 for more than 1 second.

The Intelligent k ey can also be used to activate the panic alarm by pressing and holding
the
button
05 for more than 1 second. Once activated, the panic alarm and headlights

will stay on for a period of time.
INTELLIGENT
k
EY BATTERY DISCHARGE

If the battery of the Intelligent k ey is discharged or
environmental conditions interfere with the Intelligent
k

ey operation, start the engine according to the
following procedure:
1.


Move the shift lever to the
P (P AR k) position.



2.

Firmly apply the foot brake.



3.

Touch the ignition switch with the Intelligent
k ey and a chime will sound.



4.
w ithin 10 seconds after the chime sounds, push the ignition switch while \
depressing the
brake pedal and the engine will start.
For more information, refer to the “Pre-driving checks and adjustments (section 3)”, “Starting a\
nd driving (section 5)” and the
“Maintenance and do-it yourself (section 8)” of your Owner’s Manual.
01
02
03
04
05
1276459_14_M_Hybrid_QRG_112213.indd 1011/22/13 9:39 AM

12
first drive features
Automatic Drive Positioner
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner
01 memory. Follow these steps to set the memory positions:

• Confirm the shift lever is in the P (PAR k ) position.
•
Push the ignition switch to the ON position.
•

Adjust
the driver’s seat, steering column and

outside mirrors to the desired positions, using the adjusting switches f\
or each feature.


•
Push
the SE t switch and within 5 seconds push the memory switch (1 or 2) for at least
1 second.
•


The indicator light on the memory switch you select will illuminate for \
approximately
5 seconds.
•
The

driver’s seat, steering column and outside mirror positions are now set to your preference.
These memorized positions can also be linked to your INFINITI Intelligen\
t k ey. To link a
memorized position to your INFINITI Intelligent k ey, press the unlock button on the key fob
after completing the previous step.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
01
Outside Mirror Control Switch
To select the right or left side mirror, move the
switch
01 right or left.

Adjust each mirror to the desired position using the
switch
02 .
To fold the outside rearview mirrors, push the
switch
03 to the
position. To unfold the outside
rearviewmirrors, push the switch
03 to the
position.
RE
v
ERSE TILT-DO
w
N FEATURE
w hen backing up the vehicle, the right or left outside mirror can be sele\
cted to automatically



t
urn downward.



1.

Push the ignition switch to the
ON position.



2.

Move the shift lever to the
R (REVERSE) position.



3.

Choose the right or left outside mirror by operating the outside mirror \
control switch 01 .



4.


The outside mirror surface moves downward.
01
0203
1276459_14_M_Hybrid_QRG_112213.indd 1211/22/13 9:39 AM

13
Assist Charge Gauge
This shows the power consumed 02 or generated
01 by the electric motor.
For more information, refer to the “Hybrid System Overview” section and
the “Instruments and controls (section 2)” of your Owner’s Manual.
Starting/Stopping the Hybrid System
It is important to make sure the INFINITI Intelligent key is
with you (that is, in your pocket or purse).
Depress the brake pedal.
Press the ignition switch S t AR t /S t OP button to start



the hybrid system.
The ready-to-drive indicator light 01 will illuminate
in the meter and you may begin driving the vehicle.
TURNING THE HYBRID SYSTEM OFF
Move the shift lever to the P (PAR k ) position and



apply the parking brake.
Press the ignition switch S t AR t /S t OP button to



turn the hybrid system off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
01
02
01
w hen one of the following conditions has occurred, the outside mirror sur\
face will return to



its original position.


•
The shift lever is moved to any position other than the
R (REVERSE) position.
•


The outside mirror control switch is set to the central or (neutral) p\
osition.
•


The ignition switch is pushed to the
OFF position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
1276459_14_M_Hybrid_QRG_112213.indd 1311/22/13 9:39 AM

14
first drive features
Headlight Control Switch
HEADLIGHT CONTROL
Turn the headlight control switch to the position
01 to turn on the front parking, side marker, tail, license

plate and instrument panel lights. Turn the switch to
the
position
02 to turn on the headlights.
AUTOLIGHT SYSTEM
The autolight system will automatically turn the headlights on when it i\
s dark and off when it is
light. The system will keep the headlights on for a period of time after\
you turn the ignition off
and all doors are closed.
To activate the autolight system, turn the headlight control switch to t\
he AU t O position
03
then push the ignition switch to the ON position. To deactivate the autolight system, turn the
headlight control switch to the OFF,
position
01 or
position
02 .
HIGH BEAM SELECT
Push the headlight control switch forward
04 to

select the high beam function. The blue indicator light
illuminates in the instrument panel. Pull the
headlight switch back to the original position to select
the low beam. The blue indicator light will extinguish.
Pull and release the headlight control switch
05 to

flash the headlight high beams on and off.
FOG LIGHT S
w
ITCH
The headlights must be on and the low beams

selected for the fog lights to operate.
Turn the switch (inside collar) to the position
06
to turn the fog lights on.
Turn the switch (inside collar)
to the
OFF position to
turn the fog lights off.
For more information, refer to the “Instruments and controls (section 2)” of
your Owner’s Manual.
03
01
02
04
05
06
1276459_14_M_Hybrid_QRG_112213.indd 1411/22/13 9:39 AM

17
07 FAN SPEED CONt ROL BU tt ONS


Press the left button to decrease the fan speed or press the right
button to increase
the fan speed.
08 DEFROS t ING/DEFOGGING FRON t AND SIDE WINDOWS


Press the defroster button
to turn the system on. The A/C automatically turns

on when the defroster mode is selected. This feature removes humidity fr\
om the air.
To defrost the front and side windows, set the temperature controls
03 and fan speed

controls 07 to their maximum settings.
09 DEFROS t ING REAR WINDOW AND OU t SIDE MIRRORS

Push the rear window defroster switch
to turn the system on or off.
This function automatically turns off after approximately 15 minutes.
10 FORESt BU tt ON (if so equipped)

Press the forest button
to activate the Forest Air® system.


This system’s settings will activate the breeze mode, the outside odo\
r and exhaust gas
detection sensor, the inside air quality sensor and the auto humidity co\
ntrol. The fan
speed and air flow is automatically set to the auto position.
11 IN t A k E AIR CON t ROL BU tt ON


Press the intake air control button to recirculate interior air inside the vehicle.
The
indicator light on the button will illuminate. This system is used to a\
void certain
outside odors and to help adjust the inside vehicle temperature more eff\
ectively.
The air recirculation mode cannot be activated when the climate control \
system is in the
front defroster
mode or front defroster and foot vent mode .
Press the intake air control button again to change the air circulation from the intake
air to from the outside air. The
indicator light on the button will extinguish.
12 OFF BU tt ON

Press the
OFF button to turn the climate control system off.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (secti\
on 4)” of your
Owner’s Manual.
1276459_14_M_Hybrid_QRG_112213.indd 1711/22/13 9:39 AM

19
USB/iPod® Interface
The USB jack 01 is located in the center console under

the arm rest.
w hen a compatible USB memory device or iPod® is
plugged into the USB jack, compatible audio and
video files stored on the device can be played through
the vehicle’s audio system and front display.
For more information, refer to the “Monitor, climate, audio, phone and
voice recognition systems (section 4)” of your Owner’s Manual.
Conventional (Fixed Speed) Cruise Control
The cruise control system enables you to set a
constant cruising speed once the vehicle has reached
25 MPH (40km/h).
The system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.
To activate the cruise control, push the ON/
OFF switch
01 . The
CRUISE
indicator light in the
instrument panel will illuminate.
To set cruising speed, accelerate the vehicle to the desired speed, push\
the COAS t /
SE
t switch

02 and release. The
CRUISE SE
t indicator light
in the instrument panel will
illuminate. Take your foot off the accelerator pedal. Your vehicle will \
maintain the set speed.
To reset at a faster cruising speed, push and hold the ACCEL/RES switch
03 . when the
vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COAS t /SE t switch
02. Release the
switch when the vehicle slows to the desired speed.
To cancel the preset speed, push the CANCEL switch
04 .
To turn off cruise control, push the ON/OFF switch
01 . Both the CRUISE indicator light and
the SE
t
indicator light in the instrument panel will extinguish.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
01
03
02
04
01
1276459_14_M_Hybrid_QRG_112213.indd 1911/22/13 9:39 AM

20
0205
06
Intelligent Cruise Control (ICC) System (if so equipped)
vEHICLE-TO-vEHICLE DISTANCE CONTROL MODE
To set v ehicle-To- v ehicle Distance Control mode,
press the CRUISE ON/OFF button
01 for less than

1.5 seconds. The CRUISE indicator light
02
will illuminate.
Accelerate to the desired speed.
Push down on the COAS t /SE t switch
03 and release
it. Cruise control will be set to the desired speed.
Press the distance button 04 repeatedly to change
the set distance between long, middle and short.
w hen a vehicle is not detected ahead of you in the



lane, the set distance and set vehicle speed indicator




lights will illuminate 05 in set mode.

w hen a vehicle is detected ahead of you in the lane, the vehicle ahead
detection set distance and set vehicle speed indicator lights will
illuminate
06 in set mode.
To reset at a faster cruising speed, push and hold the
ACCEL/RES switch 07 . when the



v

ehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COAS t /SE t switch
03 . Release the



switch when the vehicle slows to the desired speed.
To cancel the preset speed, push the CANCEL switch
08 or tap the brake pedal. The set
vehicle speed indicator 05 will extinguish.
To turn off cruise control, press the
CRUISE ON/OFF button
01 . The CRUISE indicator light

02 in the instrument panel will extinguish.
To set conventional (fixed speed) cruise control mode:
w hile cruise control is off, press the CRUISE ON/OFF
button
01 and hold it down for more
than 1.5 seconds. The CRUISE
indicator light will illuminate.
Accelerate to the desired speed.
Push down on the
COAS t /SE t switch 03 and release it. The SEt indicator light will
illuminate. Cruise control should be set to the desired speed.
To switch between the two cruise control modes:
w hen one of the two cruise modes is in use, you must turn the system off \
and then turn it on



again to select the other cruise control mode.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
0807
03
01
04
1276459_14_M_Hybrid_QRG_112213.indd 2011/22/13 9:39 AM

25
system guide
01
020304
0908
1110
0706
05
Navigation System (if so equipped)
01 Touch-screen display.
02 Destination (DES t ) – Press to enter a destination.
03 Information
(INFO) – Press to display the vehicle, traffic (if so equipped), weather \
(if so

equipped) or voice recognition information.
04 SE tt ING – Press to access the system settings.
05 Infiniti Controller

•
EN
t ER – Press the EN t ER button to select the highlighted item on the screen.
•

Center
Dial – Turn the dial to highlight an item on the screen, adjust a setting or adjust the
map scale.
•

Slide
the controller (push upward/downward/leftward/rightward) to select an item on the

screen, to adjust a setting or scroll the map in eight directions.
06 ROUt E – Press to access guidance control functions, such as guidance cance\
llation, route

priority or waypoint setting on the route.
07 MAP – Press to display the map. w hile following a programmed route, press multiple times
to change the type of route information.
1276459_14_M_Hybrid_QRG_112213.indd 2511/22/13 9:40 AM