2014 INFINITI Q70 HYBRID key

12
first drive features
Automatic Drive Positioner
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner
01 memory. Follow these steps to set the memory positions:

• Confirm the shift lever is in the P (PAR k ) position.
•
Push the ignition switch to the ON position.
•

Adjust
the driver’s seat, steering column and

outside mirrors to the desired positions, using the adjusting switches f\
or each feature.


•
Push
the SE t switch and within 5 seconds push the memory switch (1 or 2) for at least
1 second.
•


The indicator light on the memory switch you select will illuminate for \
approximately
5 seconds.
•
The

driver’s seat, steering column and outside mirror positions are now set to your preference.
These memorized positions can also be linked to your INFINITI Intelligen\
t k ey. To link a
memorized position to your INFINITI Intelligent k ey, press the unlock button on the key fob
after completing the previous step.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
01
Outside Mirror Control Switch
To select the right or left side mirror, move the
switch
01 right or left.

Adjust each mirror to the desired position using the
switch
02 .
To fold the outside rearview mirrors, push the
switch
03 to the
position. To unfold the outside
rearviewmirrors, push the switch
03 to the
position.
RE
v
ERSE TILT-DO
w
N FEATURE
w hen backing up the vehicle, the right or left outside mirror can be sele\
cted to automatically



t
urn downward.



1.

Push the ignition switch to the
ON position.



2.

Move the shift lever to the
R (REVERSE) position.



3.

Choose the right or left outside mirror by operating the outside mirror \
control switch 01 .



4.


The outside mirror surface moves downward.
01
0203
1276459_14_M_Hybrid_QRG_112213.indd 1211/22/13 9:39 AM

13
Assist Charge Gauge
This shows the power consumed 02 or generated
01 by the electric motor.
For more information, refer to the “Hybrid System Overview” section and
the “Instruments and controls (section 2)” of your Owner’s Manual.
Starting/Stopping the Hybrid System
It is important to make sure the INFINITI Intelligent key is
with you (that is, in your pocket or purse).
Depress the brake pedal.
Press the ignition switch S t AR t /S t OP button to start



the hybrid system.
The ready-to-drive indicator light 01 will illuminate
in the meter and you may begin driving the vehicle.
TURNING THE HYBRID SYSTEM OFF
Move the shift lever to the P (PAR k ) position and



apply the parking brake.
Press the ignition switch S t AR t /S t OP button to



turn the hybrid system off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
01
02
01
w hen one of the following conditions has occurred, the outside mirror sur\
face will return to



its original position.


•
The shift lever is moved to any position other than the
R (REVERSE) position.
•


The outside mirror control switch is set to the central or (neutral) p\
osition.
•


The ignition switch is pushed to the
OFF position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
1276459_14_M_Hybrid_QRG_112213.indd 1311/22/13 9:39 AM

22
The “Help” command can be used to hear a list of
available commands at any time.
Reduce background noise as much as possible by
closing windows and pointing H
v AC vents away from
the ceiling.

w ait until after the tone sounds and the face icon on
the display changes before speaking a command.
Speak naturally without long pauses and without
raising your voice.

w hen speaking Phonebook names, please be aware
some phones require the last name to be spoken before the first name. For example, “Michael
Smith” may be spoken as “Smith Michael”.
To cancel a v oice Recognition session, say “Cancel” or “Quit” or press an\
d hold the
or

button for 5 seconds.
If the v oice Recognition system does not recognize your voice commands, train th\
e system
using the Speaker Adaptation Mode. See your Owner’s Manual for detail\
ed information.
For more detailed information and instructions, refer to your cellular p\
hone’s Owner’s Manual and
visit www.InfinitiUSA.com/bluetooth.
Bluetooth® System with Navigation*
(if so equipped)
CONNECTING PROCEDURE
The vehicle must be stationary when
connecting the phone.


1.
Press the

SE tt INGS button, then select the PHONE

key on the instrument panel or the
button on the

steering wheel and select the “Connect Phone” key.
2.


Initiate connecting from the phone.


•

The connecting procedure varies according to each
cellular phone model. For detailed connecting
instructions and a list of compatible phones,
please visit

www.InfinitiUSA.com/bluetooth.
•
w
hen prompted for a PIN code, enter “1234”
from the handset. (The PIN code is assigned by
INFINITI and cannot be changed.)


3.

w
hen connecting is complete, the screen will return
to the Phone menu display.
*Some jurisdictions prohibit the use of cellular telephones while drivin\
g.
Microphone
1276459_14_M_Hybrid_QRG_112213.indd 2211/22/13 9:39 AM

23
PHONEBOO
k
SETUP

Depending on your cellular phone, the system may automatically download \
your cellular
phone’s entire phonebook to the vehicle’s Bluetooth® system.
If the phonebook does not download automatically, the vehicle phonebook \
may be set for up
to 40 entries.
To manually download entries:



1.

Press the button and select the “Quick Dial” key.



2.


Select the “Add New” key at the top of the display.

There are different methods to input a phone
number. Select one of the following options:
•



“Copy


from Call History” – to save a number from

the Outgoing, Incoming or Missed Calls lists.


•

“Copy


from the “Phonebook” – to save a number
that has been downloaded from your handset to
the vehicle.
•



“Enter


Number by Keypad” – to input the number
and name manually.
MA
k
ING A CALL
To make a call, follow this procedure:


1.

Press the
button on the steering wheel. The Phone

menu will appear on the control panel display.


2.

Select the “Quick Dial”

, “Call History”, “Phonebook”
or “Dial Number” key.
3.


Select the desired entry from the list.

4.


Select “Call” to start dialing the number.

RECEI
v
ING/ENDING A CALL
To accept the call, press the button on the steering

wheel or touch the “Answer” key.
To reject the call, touch the “Reject Call” key.
To hang-up, press the button or touch the

“Hang Up” key.
system guide
1276459_14_M_Hybrid_QRG_112213.indd 2311/22/13 9:40 AM