16
first drive features
Intelligent Cruise Control (ICC) System (if so equipped)
VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE
To set vehicle-to-vehicle distance control mode,
press the
button
01 for less than 1.5 seconds.
The gray indicator light
02 will illuminate.
Accelerate to the desired speed.
Push down on the
SET – switch
03 and release it.
Intelligent cruise control will be set to the
desired speed.
USB/iPod® Interface
The USB jack 01 is located in the center console
under the armrest.
When a compatible USB memory device or iPod® is
plugged into the USB jack:
•
A confirmation message appears. Select “Yes” if you prefer to use \
the USB device with
voice recognition in which song titles and artist names are registered i\
n the system.
•
Compatible audio and video files stored on the device can be played thro\
ugh the vehicle’s
audio system and front display.
If two USB devices are plugged in at the same time, you are able to use \
Voice Recognition to
choose which one should play. Just press the Talk button
on the steering wheel to activate
Voice Recognition and follow the voice prompts.
This vehicle is equipped with Audio and Video RCA inputs 02. This will allow you to play
audio and video through your vehicle from an external source.
For more information, refer to the “Getting Started (section 2)”, Voice Recognition (section 10)”, and the “Audio System
(section 4)” of your InTouch Owner’s Manual.
01
Conventional (Fixed Speed) Cruise Control
The cruise control system enables you to set a constant c ruising speed once the vehicle has
reached 25 MPH (40 km/h).
The system will automatically maintain the set speed until you tap the b\
rake pedal,
accelerate, cancel or turn the system off.
To activate the cruise control, push the ON/OFF switch.The CRUISE indicator light in the
instrument panel will illuminate.
To set cruising speed, accelerate the vehicle to the desired speed, push\
the SET – switch and
release. The CRUISE SET indicator light
in the instrument panel will illuminate. Take your foot
off the accelerator pedal. Your vehicle will maintain the set speed.
To reset at a faster cruising speed, push and hold the RES + switch. When the vehicle
attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the SET – switch. Release the
switch when the vehicle slows to the desired speed.
To cancel the preset speed, tap the brake pedal or push the CANCEL switch.
To turn off cruise control, push the ON/OFF switch. The CRUISE indicator light
in the
instrument panel will turn off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
08
04
07
03
0102
